Oasis Enterprise

Product Properties 1ï¼?High purity - Control the consistency of raw material from the mine resource. - Introduce automatic whole-process equipment to ensure product consistency. 2ï¼? Good performance - Increase globular graphite amount in the nodular cast iron significantly to promote the graphitization; - Increase the graphite crystal nucleus of molten iron, refine graphite in the matrix for more uniform distribution; 3ï¼?Fine classification - Various product category, to provide cu stomized carbon raising scheme 4ï¼?Cost-saving - Reduce the usage amount of iron, increase scrap consumption, and save raw material cost. How to use 1ï¼?For 1-5 T furnace: - while a small amount molten iron in the furnace, - or with some molten iron remained, add the carbon additive one-time, - then add the other material. which can make carbon additive fully absorbed. 2ï¼?For greater than 5 T furnace: - mix proper carbon additive with charging material as suggested first, - and then along with the increase of charging material gradually, - that is, before the molten metal rising up to about 2/3 height of furnace, - all carbon additive shall be added. It guarantees sufficient melting & absorbing time before molten metal out, and improves the absorption of carbon.

Powder: F.C: 80% Ash:10%-12% V.M.:5%-7% S:0.5% H2O:1.0% Size:0-3mm Pulverized Coal(PCI) Powder is a new spray metallurgy technology for recarburizer, mainly used in electric arc furnaces. This method can strengthen smelting, shorten metallurgical reaction time, change the traditional electric arc furnace steelmaking process, and improve the operating strength. The Function of PCI powder: 1. It has the characteristics of high carbon content, low sulfur and phosphorus, stable chemical composition, moderate hardness and regular particle size. 2. Improve thermal efficiency, reduce power consumption, reduce electrode consumption, and extend the life of the lining 3. Improve productivity and economic efficiency and reduce dust pollution in the workshop and labor intensity of workers. Briquette: F.C: 80% S:0.1-0.3% H2O:2.0% Max Size:25 mm*35mm*45mm F.C: 75% S:0.1-0.3% H2O:2.0% Max Size:25 mm*35mm*45mm F.C: 70% S:0.1-0.3% H2O:2.0% Max Size:25 mm*35mm*45mm Graphite Carbon Ball, is made of shattered graphite ore, by dosing, grinding, extrusion, drying and a series industrial process, then being a globular structure which has a certain intensity. It is an environmentally friendly smelting carbon-increasing product and a high-quality material for carbonation in the metallurgical industry. The Advantage of graphite briquette: 1 soft material, low sulfur, low phosphorus, no odor. 2, Graphite Carbon Ball is hemispherical, and can also be suitable according to user requirements. 3, high absorption rate, lubrication and fluidity is very good, suitable for thinner casting steel water to increase carbon, easy to melt (furnace temperature up to 1350 degrees or more), the general absorption rate is about 70%. 4, easy to use, can be invested, and not flying, in line with the requirements of the environmental protection department.

Carbon additive 1. Product description: The main raw material is ningxia unique high quality anthracite, with characteristic of low ash and low sulfur. Carbon additive/carbon raiser has two main uses, namely as the fuel and additive. When being used as the carbon additive of steel-smelting, and casting, the fixed carbon may achieve above 95%. 2. Application: It may substitute massively refinery coke or the stone grinds. Meanwhile its cost is much less than the refinery coke and the stone grinds. Carbon additive/carbon raiser may also use as the fuel, for its calorific value may achieve above 9386k/kg. It may substitute burnt carbon massively. The burnt carbon exportation needs the quota; therefore the carburizing agent price superiority is similarly obvious. 3. Specification: Carbon raiser: 90%min; s: 0.35%max; ash: 8.5%max; v.M: 1.5%max; h2o: 0.5%max; 91%min; s: 0.35%max; ash: 8%max; v.M: 1.2%max; h2o: 0.5%max; .C: 92%min; s: 0.3%max; ash: 6.5%max; v.M: 1.2%max; h2o: 0.5%max; 9:f.C: 93%min; s: 0.3%max; ash: 5.6%max; v.M: 1.2%max; h2o: 0.3%max; ,94%min; s: 0.25%max; ash: 5.0%max; v.M: 1.0%max; h2o: 0.5%max; ,f.C: 95%min; s: 0.25%max; ash: 4%max; v.M: 1%max; h2o: 0.5%max; Size: 1-5mm/1-4mm, 90%min, or at customers' option; Moq: 40mt(20mt for a 20' container); Packing: in 25kg small bags or in 1mt/1.2mt big bags;

1.Density:1.65g/cm3 2.Particle size:1mm, 2mm 3.Resistivity: 9ohm 4.Ash content: 0.3% 5.Compressive strength: 28mpa Wooden case or as your requirements.

Our products can comply with the following requirement : 1 FC 98.5% min 2 S 0.05% max 3 N 0.03% max 4 H 0.03% max 5 Ash 0.5% max 6 Volatile 0.5% max 7 Moisture 1.0% max 8 Partical size : 0-0.2mm 0.2-1.0mm 1.0-4.0mm 1.0-5.0mm 4.0-10mm 5.0-10mm 1 small bag in jumbo bag 2 1mt bag 3 other package

Supplier: Graphite products, carbon additive

Amorphous Graphite Powder Amorphous graphite powder is widely used in steel and iron casting as carbon additive to increase carbon content of steel or iron. Our product is of high quality and at lower price. Specifications: Fixed carbon(FC): 70%, 75%, 78%, 80%, 83%, 85% Volatile matter: Less than 4%, less than 3% Sulfer: Less than 0.2%, less than 0.1%, less than 0.05% Grain size: 200mesh,325mesh

Packaging & Delivery Packaging Details 1M.T jumbo bag, 25kg bag with 1M.T jumbo bag or packed as required Loading:20Tons/20GP Port Lianyungang or Qingdao port Lead Time : 15 days after receiving advance payment or L/C at sight Fixed carbon(FC): 78%, 80%, Volatile matter: Less than 2% Sulfer: Less than 0.5%, Grain size: 200 mesh