D6 is also be known as Residual Fuel Oil and is of high-viscosity. This particular fuel oil requires preheating to 220 - 260 Degrees Fahrenheit. D6 is mostly used for generators.
D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names.
Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400
Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil.
The price of D6 diesel traditionally rises during colder months as demand for heating oil rises, which is refined in much the same way.In many parts of the United States and throughout the United Kingdom and Australia, d6 diesel may be priced higher than petrol.
D6 Diesel Standards and ClassificationCCAI and CII are two indexes which describe the ignition quality of residual fuel oil, and CCAI is especially often calculated for marine fuels.
For petroleum products, we can put you in touch with our friend end-sellers or title holders who can provide dependable and sincere offers for express work with non-sanctioned origins.
Please contact us only if you are the real end buyer or his direct mandate.
DIESEL VIRGIN FUEL OIL D6
High-quality industrial diesel fuel suitable for power generation and industrial heating applications.
Specifications
Specification: Industrial grade
Technical Details:
Viscosity at 50C: 180 cSt max
Sulfur Content: 0.5-2.0%
Flash Point: 66C min
Pour Point: 30C max
Trading Details
Origin: Republic of Kazakhstan
Incoterms: CIF/FOB
Loading Ports: Port of Aktau, Rotterdam, Houston, etc.
Payment Guarantee: SBLC, DLC
Payment Terms: MT103 or TT
Performance Bond: 2% PB
Contract Term: 12 months minimum (with rolls and extensions)
Inspection: SGS, CIQ or similar
We supply high-quality petroleum products from trusted Middle Eastern, European, and Turkish producers, ensuring compliance with international standards.
Important Notice: Due to widespread fraud in the oil industry, our procedures are non-negotiable. No upfront payment is required. TTM (Table-Top Meeting) can be arranged before LC for qualified buyers with ICPO + POF.
Key Products & Origins:
Diesel (D2, D6) Origin: Middle East
EN590 Origin: Italy, Europe, Turkiye, Middle East
Jet Fuel (Jet A1) Origin: Middle East
Our UAE office is a licensed petroleum exporter, ensuring seamless transactions and full regulatory compliance.
Sales & Purchase Procedure:
Request: Buyer submits Letter of Interest + Proof of Funds (POF) (Bank Statement, BCL, etc.).
Introduction: Seller verifies the buyer and conducts an introductory call.
Capability Assessment: Seller assesses the buyer's financial capacity.
Corporate Offer: Seller issues a Formal Corporate Offer (FCO) with prices, volume, and terms.
Sales Agreement: Buyer & Seller finalize a Sales & Purchase Agreement (SPA). The seller also issues an MFPA (Master Fee Protection Agreement) for agents/mandates.
Banking & Collateral: Buyer submits SBLC MT760, and Seller provides a 2% Performance Bond.
Loading & Documentation: Seller loads the vessel at their own cost and issues delivery documents (B/L, Ullage Report, COO, Q88, etc.).
Delivery & Payment: Buyer conducts a Dip Test, completes an MT103 wire transfer, and receives Title of Ownership upon payment.
We ensure reliable supply, competitive pricing, and seamless transactions for our global buyers.
Product Description :
Petroleum coke is a byproduct of the oil refinery industry. Petroleum coke refers to all types of carbonaceous solids obtained in petroleum processing, which includes green or raw, calcined and needle petroleum coke. Petroleum coke is used in many applications, including electrodes and anodes. It is also used as a fuel in the metal and brick industries.
Price of product ( USD price or FOB price) :
10.000 MT monthly market price.
100.000 MT monthly market price Less 8%.
Product origin : Russia and Non Russia
Key Specifications/Special Features :
Fuel Grade Petroleum coke of Low/High Sulphur.
Calcium Petroleum coke, Graphitized Petroleum coke.
Raw Petcoke, Anode Grade, Green Grade, Carbon Grade, Cement Grade, Needle coke, etc.
Minimum Order Size and Packgaing details :
Bulk in tanker vessels.
Tanks 20 MT.
"Diesel D6 virgin oil" is not a standard term in the oil industry. However, based on common industry terminology and understanding, it seems you might be referring to a specific type of diesel fuel. Here's a general description that could apply:
Diesel D6 is typically classified under the category of middle distillates, which are refined products derived from crude oil. It is a specific grade of diesel fuel used primarily for automotive engines and industrial applications. The term "virgin oil" is not commonly used in this context; instead, "virgin" could imply that the diesel fuel is of high quality and meets certain specifications without being mixed or blended with lower-grade fuels.
Key characteristics of Diesel D6 may include:
High Energy Density: Diesel D6 is known for its high energy content per volume, making it efficient for use in diesel engines which are common in transportation (e.g., trucks, buses, trains) and industrial machinery.
Low Sulfur Content: Modern regulations often require diesel fuels like D6 to have low sulfur content to reduce emissions and comply with environmental standards.
Suitable for Various Climates: It is formulated to perform well in a range of temperatures and conditions, ensuring reliable operation in both cold and warm climates.
Industrial and Automotive Use: Besides transportation, Diesel D6 is used in various industrial applications where a reliable and efficient fuel source is needed.
For oil exporters, Diesel D6 represents a valuable product that can be sold to domestic and international markets where there is demand for high-quality diesel fuel. Exporting Diesel D6 requires compliance with international standards and specifications to ensure it meets the requirements of customers and regulatory authorities in the receiving countries.
Vopak to Vopak deals prices EN590 10 ppm US$ 540/MT, Jet fuel A1 is $82/bbl
Procedure as follows:
*VOPAK TO VOPAK*
*ROTTERDAM ð??³ð??± HOUSTON ð??ºð??¸*
ð??¢ï¸? *EN590 10PPM*
NON SANCTIONED
*PRE QUALIFICATION STEPS*
1. Buyer to provide CIS
2. Upon acceptance, Seller details will be provided for issuance of ICPO
*PROCEDURE*
1. BUYER to issue ICPO addressed to SELLER for verification and approval
2. SELLER to issue CI. BUYER signs and returns CI within 24 hours
3. SELLER to issue Authorization to BUYER for BUYER's Vopak Terminal Manager to communicate with SELLER's Vopak Terminal Manager to verify the existence of the products.This is to allow BUYER to verify fuel is real
4. After confirmation from BUYER's Vopak Terminal Manager, BUYER's Vopak Terminal Manager submits below documents to SELLER's Vopak Terminal Manager:
* Vopak Terminal Agreement or Vopak Reference Code
* Vopak Barcode
5. BUYER finalizes the Vopak Terminal Protocols
6. SELLER to issue Full POP documents to BUYER's Vopak Terminal Manager and injection begins
7. Upon completing the injection, BUYER makes full payment via MT103 TT and SELLER transfers title to BUYER
8. SELLER pays commission to its own intermediaries until the Contract is complete along with all rolls and extensions.
EN590 10ppm & Jet Fuel A1 available .Tank to Tank procedure :
TRANSACTION PROCEDURES FOR FOB â??TTTâ??
(TANK-TO-TANK)
1. Buyer issues ICPO together with tank storage agreement (TSA) for
seller approval.
2. Seller issues Commercial Invoice (CI), ICC WARNING LETTER for the
available product quantity in the
storage tank in the terminal port.
3. Buyer signs and then returns the commercial invoice with NCNDA/IMFPA
signed by all buyer Groups
with commission structures.
4. Seller Issue (3 DAY unconditional Dip Test Authorization (DTA) to be
endorsed by Sellerâ??s Company,
Buyerâ??s Company and Buyerâ??s chosen Logistic Company. Upon confirmation
of the signed unconditional
Dip Test Authorization (DTA) by both parties, Seller programs the
injection and then issues buyer the
following documents.
A.FRESH SGS REPORT INSPECTED IN LOADING TERMINAL PORT.
B.TANK STORAGE RECEIPT (TSR) WITH GPS COORDINATES).
C.AUTHORIZATION TO VERIFY (ATV).
D.INJECTION REPORT SHORE TANK.
E.CERTIFICATE OF ORIGIN.
F.AUTHORIZATION TO SELL & COLLECT (ATSC).
5. Buyer upon physical verification of the product and PPOP
confirmation, contracts SGS to conduct the
Dip test in Seller Storage Tank on Buyerâ??s expense.
6. Upon successful Dip Test, Buyer presents the tank storage receipt
(TSR).
7. Seller commences injection immediately into buyer tank and â??issues
buyer Title of Ownership
Certificate to be followed by all export Documentation.
8. Buyer makes payment by MT103 or TT wire transfer for the total
product and lifts the product, andseller pays all
intermediary involved in the transaction
