Product Description: TMM-30i is a colloidal suspension of silica in water. The silica is present as a proprietary distribution of particle sizes that produces excellent strength and stability as compared to standard sols. TMM-30i binder does not contain polymer. Typical Binder Physical Properties: Appearance: Milky white % SiO2: 29-30% pH: 9.7 - 10.7 Viscosity: 4-8 cps Density@20C: 1.201-1.219 (g/ml)
Colloidal Silica Color: Transparent Liquid Density: 1200 pH: 9 - 9.5
Precipitated silica While carbon black, chemistry name "silicon dioxide" , main ingredient "sio2", similar to carbon black in the application , appearance showed white , highly dispersed , amorphous powder or flocculent powder. Main application: White carbon black is widely used as reinforcing agent for rubber and plastic , thickening agent for ink , additives for coating , and paint , flatting agent for leather , dispersing agents for insecticides , fillers for manufacturing papers , additives for resin , fillers for insulating and thermal insulation materials . Meanwhile , it is also used as open agent for polyethylene film and carriers, anti caking agent for food , pesticide and medicine. Package: 20kg or 10kg/ woven bag Package: 20kg or 10kg/ woven bag
Keyway Industrial Limited Colloidal silica What is Colloidal Silica/ Silica Sol? Colloidal silica is a dispersion of amorphous silicon dioxide (silica) particles in water. These amorphous silica particles are produced by polymerizing silica nuclei from silicate solutions under alkaline conditions to form nanometer sized silica sols with high surface area. A charge is then induced on the silica nanoparticle surface that allows the silica particles to repel one another and form a stable dispersion, or colloid. Colloidal Silica Characters: Colloidal silicas are produced in a variety of grades that range in a number of factors. Particle size typically varies from 5nm to 40nm, and particle size distribution can vary from narrow to wide depending on the manufacturing process. Standard colloidal silica is stable at a pH from 8 - 10.5 and carries an anionic surface charge that is stabilized with sodium or ammonium. In certain grades, some of the silicon atoms in the silica particle are replaced with aluminate ions to allow for enhanced stability in a wider pH range, usually 3.5 - 10.5. Colloidal Silica Application: Densification of concrete, cement, and other materials. Fine retention in paper manufacturing. Enhanced bonding of waterborne adhesives. Improved surface friction and anti-slip properties. Wastewater filtration flocculant. Investment casting binding. Anti-soilant textile coatings.
China leading manufacturer since 1998. annual production capacity 200,000MT. SGS certified Quality assurance . More solutions will be offered as per customers' request. HS-515 SiO2% 14 16 Specific Gravity 1.08 1.09 Na2O% 0.5
PRODUCT NAME: COLLOIDAL SILICA Other name: SILICA SOL MODEL: JN-30 Color: Clear CAS NO. : 112926-00-8 TDS Specification: SIO2, %: 20-40% NA2O, %: 0.40 , PH: 9.0~10.5 Viscosity : 4.3-5.5 cp ; SP.GR: 1.19~1.21, 1.29~1.31 Particle Size: 8~15 nm Application for investment casting, lost wax casting, refractory, water paint, concrete polishing..
SiO2% 14-16 Specific Gravity 1.08-1.09 Na2O% 0.5 PH Value 25 9-11 Viscosity(25, mPas) 6.5 Particles Size(nm) 2-7 Shelf Life 6 months application to #PulPaperMaking -improve fiber and #finesretention -improve colloidal retention -improve starch retention -improve #dewatering (#drainage, #pressing, and #drying) -improve formation -improve runnability -reduce downtime and off-quality production
PRODUCT NAME: COLLOIDAL SILICA Other name: SILICA SOL MODEL: JN-30 Color: Clear CAS NO. : 112926-00-8 TDS Specification: SIO2, %: 30, NA2O, %: 0.40 , PH: 9.0~10.5; Viscosity: 4.3-5.5 cp ; SP.GR: 1.19~1.21 Particle: 8~15 nm Application for investment casting, lost wax casting, refractory, water paint, concrete polishing..
Product Name - Nano colloidal Silica Gel Product Description - Solution of nano colloidal silica used in the paper manufacturing Industry .Our Product results in enhancing the frictional and printing properties . The paper treated with nano colloidal silica are stiffer and clearer.Also colloidal silica is a common retention and drainage aid used during Paper manufacturing. Colloidal Silica can be used to create an anti-slip surface on paper and packing materials .It provides higher coefficient of friction make easier of stacking of finished products .When used to coat inkjet and photo paper the colloidal silica particles fill in to porous surface coating that readily accepts water -based inks .However colloidal silica is a most needed ingredients in the â??wet endâ?? phase of paper manufacturing . Product Specification Brand AR cw pH Value 9.7- 10.3 5 Solid 15 30 Sp . Gr 1.1 1.2 -1.25 Application Areas Brand AR CW Anti fractionizing (Yes) Drinage aid (Yes) Wet end additives (yes) Coating (Yes) (Yes) Product Features Invisible Surface treatment Easy clean up Excellent slide angle performance Good friction retention Zero Agitation requirement Economical with dilution Enhanced printing Packing - Packing In 200KG Barrel or IBC tank of 1MT capacity Container details - 20 crate accommodate 20 Mt Pricing - 4.5 US$ / Kg FOB Mundra port- Gujrat India / FOB Navasheva- Mumbai, India Minimum Order - 1MT Origin - India
Product Description P30 Nano Colloidal silica (organically modified) with transparent to translucent appearance which offers block resistance ,dirt pick up resistance and good stability . Improves scratch resistance, good hardness, improved adhesion and flexibility in clear coats, pigmented coats, water-borne pack and UV curable coatings. Product Specification Brand Paint pH Value 9.0- 10.5 PSD 25-35 Nano meters Solids(%) 28-32 Application Areas Emulsions,( Acrylic ,Styrene Etc ) Wood Finishes Out door and Indoor Emulsion Paints Stainer's in Emulsion Paints Product Features It gives excellent compatibility of silica to the polymer due to organic modification hence it increases hardness of the Emulsion of the Films and at the same time does not increase brittleness due to inherent plasticity Due to organic groups it can be used in the wood finishes to produce Tough Stain Resistant Film Can be used in Indoor and Outdoor emulsion paints as it reduces Dirt Pick-Up Can be used as Stainer in Emulsion . Packing - Packing In 200KG Barrel or IBC tank of 1MT capacity Container details - 20 crate accommodate 20 Mt Pricing - 5.5 US$ / Kg FOB Navasheva Mumbai. India Minimum Order - 1MT Origin - India