Description: Loose Tube Optical Ground Wire is surrounded by single or double layers of aluminum clad steel wires(ACS) or mix ACS wires and aluminum alloy wires. are the most widely used cables ,their design is fully adapted to the most common electric line needs. Application:Aerial/ground(earth) wire. Note: 1.Cables can be supplied with a range of single mode or multimode fibers. 2.Specially designed Cable structure is available on request. 3.Cables can be supplied with dry core or semi dry core
Description: GJDFBV flat ribbon cable uses fiber ribbon as optical transmission medium, covered with aramid yarn as strength member, then extruded with a PVC sheath. Other sheath materials, like LSZH and TPU, are available on request. Application : 1. Ribbon fiber flexible connection jumper 2. Various indoor cabling solutions. Especially used in good laying conditions. 3. Interconnection between apparatuses Note: 1.Cables can be supplied with a range of single mode or multimode fibers. 2. The dimensions and raw materials can be designed according to the demand of the customers. 3. Standard Reel Length: 2000m/reel: other lengths available on request.
Description: Mini span adss fiber optic cable is idea for installation in distribution as well as transmission environments, even when live -line installations are required as its name indicates, there is no support or messenger wire required, so installation is achieved in a single pass. Application: self-support aerial installation Characteristic: 1.Suitable for use on distribution and high voltage transmission lines with mini spans or self supporting installation for telecommunication . 2. Track -resistant outer jacket available for the high voltage line where space potentials up to 35kv. 3. Gel-filled buffer tubes are s-z stranded 4. Instead of aramid yarn or glass yarn, there is no support or messenger wire required. Aramid yarn Is used as the strength member to assure the tensile and strain performance 5. For mini span (100-150) the fiber counts from 2-72 fibers Note: 1. Only a part of adss cables are listed in the table. More can be produce as required . 2. Cables can be supplied with a range of single mode or multimode fibers. 3. Specially designed cable structure is available on request.
Desription: 1) 100% optic test: Insertion Loss: 0.3 (PC); 0.2 (APC); 0.2 (UPC); 0.3 (SPC); 2) 100% optic test: Return Loss: 45 (PC); 60 (APC); 55 (UPC); 50 (SPC); 3) Excently qualified standard PC, APC, UPC, polishing 4) Simplex and duplex connector available 5) High precision of mechanical dimensions 6) Good exchange ability and good durability;
Description: Composite or Hybrid Cables are cables that have a number of different components laid up within the bundle. These types of cables allow for multiple transmission paths by various components, whether they be metal conductors or fibre optics, and allow the user to have a single cable, therefore reducing the overall cost and lead time for installation. Application: 1.Used in outdoor applications that require both optical fiber and copper wire elements for communication and power 2.Copper wire can power remote electronics used in fiber optic communications 3.Copper wire can also be used for low data rate data transmission 4.Deployable cables have been used in network and private broadcast applications around the world 5.Cables can be designed for your custom applications Note: 1.Different conductor specification can be make as required. 2.Different Fiber specification can be make as required.
·Description indoor fiber optical cable is made by evenly applying strands of Aramid yarns as the strength member over tight buffer fibers and then is completed with a flame-retardant sheath. ·Characteristics · Good uniformity of the outer diameter of tight buffer fiber and excellent strippability · Good performance of flame-retardant · Low induced attenuation within the operating temperature range · Excellent geometrical dimension of the fiber ·Application · Data communication · Making connector · Installation: riser, plenum, etc. · Places where waterproof is not strictly required · Making jumper, pigtail and building distribution ·Description · 1fiber, Φ900μm or Φ600μm Tight buffer fiber, Aramid yarn, PVC Jacket. ·Standards · Comply with Standard YD/T 1258.2-2003, ICEA-596, GR-409, IEC794, etc; and meet the requirements of UL approval for OFNR and OFNP. Want to know the price,please contact us. www.ksdfibercable.com email:selia@ksdcable.com
Fiber Optic Cables
Description Micro air blown fiber optic cable is mainly used in access network and metropolitan area network. By air blowing installation technology, without excavation surface in tiny pipe installation, also can be installed in the existing cable pipe,save pipeline resources, meet the real time capacity of the network. We communication provides the micro optical cable technology can reduce the early stages of the fiber optic cable construction cost,increase investment according to the demand of the network, to speed up the return on investment, is an good solution of FTTH. Note: 1. Cables can be supplied with a range of single mode or multimode fibers. 2. The dimensions and raw materials can be designed according to the demand of the customers. 3. Standard Reel Length: 3000m/reel: other lengths available on request.
