The FK-5-1-12 Clean Agents, also known as NOVEC1230 Fire Suppression Agents, is a highly efficient and reliable hydro-fluorocarbon fire extinguishing solution. This product is designed to quickly and effectively suppress fires in various settings while being non-toxic, environmentally friendly, and safe to use. Model Number: FK-5-1-12 clean agents Product Name: NOVEC1230 Fire Suppression Agents Reliability: High Model NO.: FK-5-1-12 clean agents Application The FK-5-1-12 Clean Agents is suitable for use in various applications, including but not limited to: Commercial buildings Industrial facilities Data centers Telecommunication rooms Museums and art galleries Power generation plants Server rooms Control rooms Storage facilities
Intelligent fire Detection system as a high efficiency and low cost unmanned fire detection system in capable of an early detection regardless spontaneously fire or firebug. This system is located in outdoor area such small and middle sized cultureal assets, natural monument and outdoor facilities.
A fire alarm system is a set of electric/electronic devices/equipment working together to detect and alert people through visual and audio appliances when smoke/fire is present. These alarms may be activated from smoke detectors, heat detectors, water flow sensors, which are automatic or from a manual fire alarm pull station. Types of Fire Alarm System: All Fire Alarm Systems essentially operate on the same principle. If a detector detects smoke or heat or someone operates a break glass unit (manual break point), then alarm sounders operate to warn others in the building that there may be a fire and to evacuate. It may also incorporate remote signaling equipment which would alert the fire brigade via a central station. Conventional Fire Alarm System In a Conventional Fire Alarm System, a number of call points and detectors are wired to the Fire Alarm Control Panel in Zones. A Zone is a circuit and typically one would wire a circuit per floor or fire compartment. The Fire Alarm Control Panel has a number of Zone Lamps. The reason for having Zones is to give a rough idea as to where a fire has occurred. This is important for the fire brigade and of course for the building management. The accuracy of knowing where a fire has started is controlled by the number of Zones a Control Panel has and the number of circuits that have been wired within the building. The Control Panel is wired to a minimum of two sounder circuits which could contain bells, electronic sounders or other audible devices. Each circuit has an end of line device which is used for monitoring purposes. Addressable Fire Alarm System The detection principle of an Addressable System (Fire Alarm System) is similar to a Conventional System except that the Control Panel can determine exactly which detector or call point has initiated the alarm. The detection circuit is wired as a loop and multi devices may be connected to each loop. The detectors are essentially Conventional Detectors, with an address built in. The address in each detector is set by dil switches and the Control Panel is programmed to display the information required when that particular detector is operated. Additional Field Devices are available which may be wired to the loop for detection only i.e. it is possible to detect a normally open contact closing such as sprinkler flow switch, or a normally closed contact opening. Fire Alarm System comes with single loop as well as multi loops. It depends on requirement. The items which are integrated with Fire Alarm Systems are given belowâ?¦. Brands are available : AGNI, MORLEY, NOTIFIER, Modern Technologies gives you top class branded Fire Alarm System with affordable price. We also provide installation & maintenance services.
ISO 9002, EN 29002:1987,BS5750 part2:1987,ANSI/ASQC Q92:1987 Fire suppresent cyclinders, Hoses and couplings, Nozzels, Dry chemical Powder ABC type etc. 25lbs to 50lbs..
Kitchen fire system Fire system Automatic kitchen fire suppression system, are essential to modern service industries and commercial kitchencooking stove fire extinguishing system. Kitchen automatic fire extinguishing equipment and a kitchen fire special agents have all passed the national fixed fire extinguishing systems and fire resistant components for quality supervision and inspection center qualified.A kitchen fire special agents are nontoxic, pollution-free, corrosion free cleaning of fire special agents. Fire extinguishing efficiency and ceased to burn. Kitchen automatic fire extinguishing device can be widely used in hotels, guesthouses, offices, hospitals, schools, factories and enterprises and institutions in the kitchen, dining room (cooking wok, deep fry pan) and western-style cookers (flower stoves, barbecue stoves, lie furnace). Working principle 1)after the oil pan on the kitchen hearth is burning, the large heat from the fire makes the heat-detection infusible metal in haul cable releaser break away. 2)the heat detection system open the release device of kitchen fire-extinguishing system to exert pressure on the vessel storing the fire extinguishing agent 3 )the liquid extinguishing agent is sprayed on the surface of the device n the kitc and drive all the auxiliary pneumatic or electric switch-off devices and the alarming linkage system. Hen hearth and the smoke exhaustion hood, oil-filter screen and exhaustion pipeline through the nozzle. This special extinguishing agent can extinguish the flare inside the oil pan rapidly and form a covering layer to inhibit the burning of oil material steam and prevent the rekindling of oil material. 4)within about 3-5seconds after the system sprays the agent, the valve in the system opens the spraying valve automatically, the water sprays through the pipeline of extinguishing agent and the nozzle and cools and brushes the oil material and the surface of the hearth device rapidly.
DESCRIPTION Type: PP24C Service Pressure: 0.5-1.0MPa Max Service Pressure: 1.0mpa Spray Capacity: mixed liquids 24l/s, water24l/s Range: more than 40m Horizontal rotary: more than +- 180degrees Max angle of elevation: more than +- 70 degrees Max angle of depression: less than -60degrees Allowable error of discharge capacity: +- 8% Foaming times(at 20degree): more than 6 25% discharge time(at 20 degree): more than 2.5min Effluent capacity: 85T/H Connection Flang: DN80
Vehicle/Boat Automatic Fire Suppression Systems
PRI-SAFETY was established in 2004, Located in Hangzhou, China, is professional manufacturer of Automatic Fire Suppression Systems , Fire Extinguishers, CAFS fire Systems(Compressed Air Foam Fire Systems). We supply not only products, but also the professional fire systems design and solution for customers