The AEC1112- Computerized Universal Testing Machine with a maximum load capacity of up to 10, 20, 40, 60, 80, 100 and 200 Ton with the provision of testing various samples of metals and its different alloys for the testing in tensile mode for round and flat specimens as per the national and International standard like ASTM, DIN, ISO, EU and IS standards etc.
capacity of up to 10, 20, 40, 60, 80, 100 and 200 Ton.
Parameters WEW-100
Accuracy 1% of indicated value
Measuring range of force(kN) 2-100kN
Subsection of force 1,2,5,10
Accuracy of deformation measurement 0.5%F.S
Clamping diameter for round specimen(mm) ;6-22
Clamping width of flat specimen(mm) 40
Clamping thickness of flat specimen(mm) 0-15
Testing space Tension 550
Compression 500
Platen size 100
Distance of bending by pass roll(mm) 30-400
Piston stroke(mm) 250
Power supply : 50Hz
Working environment Room temperature : relative humidity
Overall dimension(mm) Frame machine730x500x2000
Control System 1070x810x1730
Weight(Kg) 1370
3. Applications of testing machine
This machine is applicable to metal, cementing compound, tubes, sectional bars, aerospace, petrochemical, waterproof rolls, wire and cable, textile, fiber, rubber, ceramics, food, mechanical packaging, geo-textile, film, wood, paper and other industries and quality supervision department, and it also can be used in college for teaching demonstration.
4. Features of testing machine
1) Adopting aluminum alloy cover, with attractive streamline structure
2) Mainly used to test mechanical properties for metal, non-metal and composite materials
3) Adopting precision auto control and data acquisition system to realize fully digital adjustment to data acquisition and control process. During test, it can test max. Bearing tensile force, compression force, tensile strength, deformation, elongation, yield point and other technical specifications
4) After test, the above parameters can be calculated automatically through main controller according to the test parameters, which are set before test and meantime display the corresponding test results. All test parameters can be saved and inquired after test, also can be printed out.
5) With remote control box to realize speed adjustment of crossbeam, flexibly and freely switched
6) With functions of automatic return to original position, intelligently, efficiently, quickly
7) With limit position function of any working position and over voltage, over current protection functions, reliable and safe
8) With many control modes of constant speed control to force, stress, deformation, strain and low cycle and user self-programming control
9) Switch among many test curves: stress-strain curve, load-deformation curve, load-displacement curve, load-time curve, deformation-time curve, displacement-time curve. Partial enlargement, overlap and comparison.
Supplier: Gas lighter, led screen protector ( not even in domestic ), refill paper cups, table runner, earing brass clamp, auto brass electric parts, cashew nuts, wire mesh, petha sweet, niwar, mohini powder, vermicompost, dry bath incubator, test tube plastic, sordium citrate tube, health care product, ornamental freshwater fish, safed musli, used polymer bag, cotton linter, auto hood cover,
areca plate, rice
The digital compression testing machine with dedicated universal computer software for reading purpose, self operating & monitoring has been designed to meet the need for a simple, economic and reliable means to test concrete / cubes etc. For its compressive strength. The design expressive of simplicity, both of construction and operation, makes the machine easy to use and maintain. The unit is compact, making it useful for site and
Laboratory applications.
Features:
•High stability four pillar load frame.
•Each frame tested for stability and alignment to avoid tension failure during a test and to ensure centre loading.
•A precise large diameter spherical upper platen for optimum results.
•Motorized hydraulic power pack or pumping unit with rapid approach and automatic over load protection.
•Comes standard with safety guards on all four sides
The complete unit comprises a loading unit which is of four pillar model construction having a cross-head with a spherical seated platen. The lower platen is attached to the top of the piston. The loading capacity is of 2000 kn, cubes up to 200 mm & cylinders up to 150 mm dia x 300 mm height can be tested using the appropriate spacers.
Pumping unit attached to the loading unit by high pressure hydraulic flexible hose pipe. The pump facilitates rapid approach of the platens for daylight closure and also provides comprehensive control over the application of load.
A control valve provides fine control over the loading rate for accurate pacing.
Maximum load is held and retained for approx. 15 min, unless cancelled, using the panel mounted reset switch. Pace rate set for running the test can be maintained manually.
200 tones in different models. Portable models are very convenient and useful for site use where carrying frequently the specimens for testing in a standard laboratory is inconvenient and uneconomical. With special attachments, the machines can also be used for bricks, hallow or solid concrete blocks, using appropriate capacity machine. In general compression testing machine consists of a load frame with suitable platens and a pumping unit with pressure gauge, either hand operated or electrically-cum-hand operated. Load frame and pumping unit are connected by pressure pipes.
1.Description
Chase friction testing machine is used to evaluate the frictional characteristics of material in braking system in accordance with the SAE J661,GB 5763-2018 and GB/T 17469-2012.
Chase machine is suitable for small bench test of M1, M2, N1, O1 and O2 vehicles brake linings.
This machine is widely used for product formulation R&D, Quality control and Certification etc.
2.Principle
A constant pressure is applied to the sample,which will be pressed against the inner surface of the friction drum which rotates at a certain speed, so a friction force will be generated along the tangent direction of the contact surface. The friction
coefficient of the tested sample can be determined by measuring the pressure and friction force.
During the test, the Chase friction tester controls the temperature change at any time according to the requirements. The drum outer ring is used to assist the heating tube heating and the back suction cooling, so that the temperature change at the sample is stable and the temperature measurement accuracy is higher.
3.Features
(1)Loading by Pneumatic servo with high precision control.
(2)Temperature of friction drum is adjustable to adapt to different test requirements and different climatic condition.
(3)Rubbing speed can be set freely between 0 and 1000 RPM.
(4)The maximum load is up to 2000N.
(5)This machine is controlled by PC. Speed, loads, temperature and test time can be preset by software. Test results are saved in computer.
4.Standards
SAE J661, SAE J866, GB 5763-2018, GB/T 17469-2012,
5.Specifications
Speed 0 to 1000 RPM
Load 0 to 2000 N
Temperature 0-600 (1112)
Heating power 6KW
Friction drum Ф277mm
Power AC 380V
Weight Approximate 2100kg
