Product introduction: 1, solar street light controller can automatically adapt to 12V and 24V systems. 2. It has a dual-period control function (lit at night and before dawn) to meet the individual needs of customers for street lamps. 3. There are three kinds of load power supply modes: pure light control, light control on + delay off (single time), light control on + delay off - delay on + light control off (double time). 4. The dual-period solar street light controller adopts intelligent machine design. All work processes are controlled by software and can achieve high precision and high reliability. 5, using high-efficiency PWM charging technology, with high-precision temperature compensation. 6. The digital tube displays the operating parameters of the LED lamp. 7, with overcharge, over discharge, electronic short circuit, overload protection, anti-reverse and other full electronic protection. 8, the whole machine adopts full potting process, waterproof rating IP68.
Product introduction: 1, MPPT lithium battery solar street light controller automatically adapts to 12V and 24V systems. 2, built-in boost type constant current source, the efficiency can reach above 95%. 3, with 4 working modes, working time and LED lamp brightness can be adjusted. 4, with infrared remote control function, all parameters can be set using a remote control key. Can also be used to set the button, directly 5, displayed on the digital tube. 6. The integrated street light controller has a smart power-down function to extend the working hours of the LED lights. 7. High-efficiency PWM charging technology is adopted to ensure that the battery is working in the best condition, which greatly prolongs the service life of the battery and has high-accuracy temperature compensation. 9, with overcharge, over discharge, electronic short circuit, overload protection, anti-reverse protection. 10, full plastic, metal body, waterproof and drop, to deal with various harsh environments.
Application: Repower c series solar charge controller is designed for solar system application, it can charge the battery intelligently in the daytime, and discharge to offer 24-hour current in dc system.Or control the system output time manually, the Pwm Sdpc-sp-40a Pwm Sdpc-sp-50a Pwm Sdpc-sp-60a Pwm Rated charge current 30a 40a 50a 60a Rated load current 30a 40a 50a 60a Work voltage 12v; 12/24v auto Over load, short circuit protection 1.25 rated load current 60sec, 1.5 rated loads current 5sec, over load protection action. ¡ý3 rated load current short circuit protection action. No load current ¡ü6ma Charging circuit voltage drop ¡ü0.26 v Load circuit voltage drop ¡ü0.15 v Over voltage protection 17v; ¡á2/24v Work temperature Industry stage:-35¡ãc to +55¡ãc; Boost charge voltage 14.6v;¡á2/24v; (keep 10min) Direct charge voltage 14.4v; ¡á2/24v; (keep 10min) Float charge voltage 13.6v; ¡á2/24v; Charge return voltage 13.2v;¡á2/24v; Temperature compensation -5mv/¡ãc/cell (boost charge, direct charge, float charge, charge return voltage); Lower voltage indicate Size:185*105*55mm Weight:1.32kg
60/80/100a mppt solar charge controller
Main technical parameters Model no.: Sdt-sf24a10t(e) Rated charge current 10a Rated load current 10a System voltage 24v/12v auto switch; Max solar input voltage 60v 100v 100v Max pv input power 130w@12v 260w@24v Energy conversion efficiency Max 98% Protection for over load and short circuit 1.25rated load current 60sec. 1.5 rated loads 5sec ¡ý3rated current short circuit protection action No load consumption ¡ü30 ma Charge circuit voltage drop ¡ü0.26v Discharge circuit voltage drop ¡ü0.15v Over voltage protection 17v, ¡á2/24v; Work temperature Industry stage:-35¡ãc to +55¡ãc; Boost charge voltage 14.6v;¡á2/24v;(only when over discharge) Direct charge voltage 14.4v; ¡á2/24v; Float charge voltage 13.6v; ¡á2/24v;(keep time:until drop to charge return voltage) Charge return voltage 13.2v; ¡á2/24v; Temperature compensation -5mv/¡ãc/2v(boost charge, direct charge, float charge, charge return voltage) Lower voltage indicate 12.0v; ¡á2/24v; Over discharge voltage 11.1v; ¡á2/24v; Control mode (mppt)maximum power point tracking Weight:0.5kg
MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging. LCD display , easy to operate on LCD screen Multi stage charging (3-stage charging , parallel charging and equalized charging function) BTS - Battery remote temperature sensor terminalEnable to charge Li-thium, Gel , lead-acid battery With RS485 & USB communication port Protection: PV array short circuit, PV reverse polarity, Battery reverse polarity, Over charging, Output short circuit
Model: mppt5012a-duo (12a) , mppt5025a-duo (25a) Solar charging controllers for camper Charge modemppt System voltage12v Battery numbertwo battery charging ports Battery typegel, lead-acid, agm2, lifepo4 Application 1.For camper, caravan 2.Self-contained solar systems 3.For boat 1. Increased mpp charging current compared with conventional controllers, due to ultramodern controller technology (microprocessor)by 10 % to 30 % (efficiency > 95 %) 2. Switchable characteristic lines of charging for optimum charging of gel/dry fit/agm/fleece or acid/lead-acid, as well aslifepo4 batteries . 3. Two battery charging ports: automatic charging of the main battery or board battery (board i): Support charging and trickle charging (max.1 a) of the vehicle's starter battery (start ii) with overcharge protection 4. Unattended charging: standard protection against overload, overheating, reverse battery and back discharge of the battery(in case of insufficient solar power, such as at twilight, at night etc.). 5. Overcharge protection: reduction of the charging current of the battery in case of excessive solar power and full battery. Immediate recharging in case of power consumption to ensure always the best possible charging state of the battery. 6. Connection for temperature sensor , automatic adaptation of the charging voltage to the battery temperature. Incase Of low outside temperatures, full charging of the weaker battery is improved, and in case of summery temperature sun necessary battery gassing will be avoided. This is highly recommended, if the battery is exposed to strong variations in temperature, such as in the motor compartment. -
The SANDI solar charge controller adopts advanced digital control technology, touching keys and automatically operation. With the features of PWM (Pulse Width Modulation) battery charging and unique control technology, the PV charge controller improves battery life efficiently. The PV charge controller is only suitable for controlling solar modules. Never connect any other types of charging source to the controller. This can destroy the controller and/or the charging source permanently. To meet different solar power stations need, there are 48V 96V 120V 192V 220V 240V 360V 384V 480V 492V and 600V other normal series voltage level base on different battery voltage of off-grid PV power station system project. Product Feature: 1, The solar controller uses high performance 32-bit chips which is excellent EMC design 2, The controller adopts advanced PID algorithm which has more accurate battery energy management system to improve the battery efficiency 45% at least 3, The controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of photovoltaic modules and batteries 4, IGBT Modular design ensure stable and efficiency performance of solar controller and solar power system 5, The controller has perfect battery protection function and with multi-stage charging technology to improve battery life 35% at least 6, The controller has double loop control function of voltage loop and current loop, user can set the limiting charging current 7, Fully enclosed duct design and high-speed fan for cooling makes the controller working under harsh environments 8, The controller has power generation statistics and real-time power curve function, so we can know power generating information at any time 9, Colorful LCD display, touching key and multi-language option makes the HMC (Human Machine communication) easy and convenient. Users also can set working parameters through the LCD panel and touching keys according to different battery feature 10, The controller also has temperature compensation function and RTC real time clock function, 11, Standard Modbus protocol for RS-485 or GPRS communication to extend the communication distance (optional function) 12, The patent of second protection function which can protect battery from over charging due to power switch failure (optional function)
1. Increase the charging current, compared to the traditional PWM controller, MPPT charging efficiency can be increased by 10-30%. (Controller conversion efficiency> 95%) 2 can be selected by DIP switch 4 batteries. GEL battery, lead-acid (liquid) battery, AGM2 battery, LiFePO4 lithium iron phosphate battery 3. With load output, with over discharge, overload, short circuit protection. 4. With Bluetooth function, you can view the controller parameters through the phone APP display (MPPT5020-BT models only) 5. Automatic unattended charging. With overload, overheating, reverse current protection (cloudy or no sunlight at night, to prevent the battery back to the solar panel) 6. Overcharge protection. When the battery is full, the charging current will be reduced, when the battery is dead, it will immediately charge the battery 7. Automatic temperature compensation. Ensure the battery in the low temperature or high temperature environment, the use of charging parameters to extend battery life It is strongly recommended not to install the battery and controller in place of heat source, so as to avoid controller's misoperation. Shenzhen OLYS Technology 12 years focused on the development and manufacture of solar controller, master the core of solar energy, service more than 300 new energy companies. -