Philip Zhou

LN-PS201 is a one-component, medium-modulus polyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to all typical construction materials such as cement based materials, brick, ceramic, glass, wood, galvanized and painted sheet iron and various plastics. INSTRUCTIONS l Before application, be sure that joint surfaces are clean, dry and free of all contamination, l Apply sealant evenly, If necessary, use masking tape and remove the tape while the sealant is still soft, l Joint width/depth ratio should be 2:1 (Table 1), l If necessary, use back up material to adjust joint depth, l Sealants should adhere to only two surfaces of the joint: Use backer rods and bond breakers to facilitate. STORAGE AND SHELF LIFE; l 12 months if stored in its original package, away from direct sunlight and moisture, between +10 �C and +25 �C

It is a one-part polyurethane product formulated by Gorcci International. It reacts with moisture in the air to form a kind of elastomer with high strength, aging, vibration, low and corrosive resistance properties. PU Sealant was widely used to join the front, back and side glass of the cars and also can keep a steady balance between the glass and the paint on the bottom. Normally we need to use a sealant guns to press out when it shaped in a line or in bead.

MAIN USE: 1.Specially used for windshield and side glass of bus, car, railway vehicle (metro, high-speed rail), ship, spaceflight, engineering machinery vehicle, carriage and special vehicle. 2.For glass steel and plastic accessories (car roof, side body and car front). 3.For metal, plastic, and glass which requires high tensile strength and elasticity, the bonding can bear high mechanical deformation force. CHARACTERISTICS: 1.One component formulation. 2.Modest hardness after curing. 3.Flexible, durable and excellent extruding performance. 4.No need primer to glass. 5.No sagging, no pollution and corrosion to base material and environment. 6.Excellent sealing performance, excellent water and aging resistance. PACKING: It is available in 300ml cartridges, and 590ml sausages. COLORS: Black & other OEM colors. STORAGE: When stored at 25 or lower temperature in the original unopened container, it has a shelf life of 12 months from the date of manufacture.

It is based on moisture curing polyurethane, containing safety propellant, is used to seal gaps and crevices with very high expansion yield UP TO 65 LITERS, the post-expansion is quite low to prevent deformation. The foam that dispenses from aerosol can is moisture cured and draws humidity from the air for pipes, windows and doorframes. Foam can be cut once fully cured, provides excellent bond to lumber, plywood, concrete, metals, masonry and other substrates.

Introduction: Homey p35 polyurethane sealant for construction,  is one-part room temperature moisture Curing polyurethane with high adhesion strength, aging resistant, vibration exhaustion resistant, Low,  temperature resistant and free-corrosive properties, is excellent where gap filling requirements are needed. Typical uses: , precast panel, wood, aluminium , pvc joinery seams , curtain wall, bakes clay and concrete roof tiles Cas no.:, 9009-54-5 Other names:, pu adhesive sealant Mf:, mixture Einecs no.:, 230-391-5 Place of origin:, china(mainland) Classification:, other adhesives Main raw material:, polyurethane Usage:, construction, woodworking, other Brand name:, homey Model number:, p35 Type:, polyurethane sealant Component:, one component Hs code:, 3506100010 Curing system:, moisture Volume:, 310ml Color:, white, grey, black Performance:, low temperature resistant, vibration ehaustion, anti-aging Oem:, available Price:, negotiable Shelf life:, 9months Storage:, store at 25, , or below Packaging details:, 310ml;24pcs/ctn 20' container 24pcs/ctn, 2000 cartons without pallet, 1440 with pallet

Acrylic sealant is a one component, paintable and flexible, mildew resistant acrylic sealant formulated for sealing of gaps and joints where slight movement or vibration causes conventional, non- elastic fillers and putties to crack and fall out. It had good adhesion to most porous surfaces without primer and is economy yet environmental friendly that can be cleaned up with water. CHARACTERISTICS: 1.Excellent flexible. 2.Paintable. 3.Ready to use. 4.It can be cleaned with soap and water. 5.Durable waterproof and anti-mildew. 6.Non slump - can be applied to vertical surface. 7.No pollution and low odor. 8.It can be used indoor decoration and construction purpose. MAIN USE: For caulking, sealing and decoration uses in waterproofing, gap filing, wood frame joints, doors & windows sash, drywall, plaster,marble, tile & brick works, painters sealant for interior works. COLORS: White, black, grey and other colors based on customer's requirement. PACKING: It is available in 300ml disposable plastic cartridges, and 590ml sausages. STORAGE: When stored at 27 or lower temperature in the original unopened container, it has a shelf life of 9 months from the date of manufacture.

Neutral silicone sealant 1.Manufacturer of silicone sealant in over 15years. 2.We insist on good quality with competitive price to make clients satisfied. 3.Final price will be determined by more details confirmed. 4.Free samples available,delivery cost is to be paid by clients. 5.OEM/ODM available. 6.Health and safety considerations 7.LT: 7-15days.

CHARACTERISTICS: 1.Good weather resistant ability. 2.One-component,moisture curable,excellent thixotropy,easy to apply. 3.Persistent water proofing. 4.Good adhesion, excellent adhesion to most building materials. MAIN USE: It's suitable for the sealing of the joints of all kinds of architectural doors and windows, and the assembly and sealing of doors and windows glass. Not suitable for structural bonding. COLORS: Clear, white, black, grey and other colors based on customer's requirement. PACKING: It is available in 280mm and 300ml disposable plastic cartridges, and 590ml sausages. TRANSPORTATION: This product is transported by non-dangerous goods. STORAGE: When stored at 27 or lower temperature in the original unopened container, it has a shelf life of 12 months from the date of manufacture. INT-795 clear sealant has a shelf life of 12 months from the date of manufacture.

Netural Silicone Sealant T-600 is a one component,high quality moisture curing neutral silicone sealant designed for sanitary applications where non-corrosive, moldproof and chemically resistant properties are required. It is suitable for sealing of connection joints between varieties of substrates in wet areas. CHARACTERISTICS: Mold & mildew proof. Resistant to cleaning agents. Maintains its flexibility at temperature extremes. Highly elastic, 25% movement capability. UV, water and weather proof. Non-corrosive neutral cure. Fast curing. Low odor. Interior/exterior use. Non-sag. MAIN USE: 1.Sealing applications of joints around bathtubs,showers and sinks. 2.Sealing of joints between tiles, ceramic, metal sheets and walls. 3.Sealing expantion joints in tile walls. 4. Sealing of connection joints between walls and floors. 5. Sealing of joints between glazing and supporting substrates. PACKING: It is available in 280ml and 300ml disposable plastic cartridges. COLOR: Clear and other colors based on customer's requirement. STORAGE: When stored at 25 or lower temperature in the original unopened container, it has a shelf contact: