Sunrain heat pump water heater is one of the most economical systems to heat water for family domestic use. Using free renewable energy from the air, the heat pump is highly efficient with low cost. It can save energy up to 80% compared with traditional gas boiler or electric water heater.
Features & Benefits Parameter
Easy installation with all in one type
Famous brand compressor
High efficiency with good performance
Enamel water tank inside with long lifespan
High density foam with good insulation
Intelligent controller
Reverse cycle defrost with 4-way valve
Hydrophilic fin coil coating
100% factory tested
Higher water temperature output up to 75 °C
Low voice
Compressor according to indoor and outdoor temperature automatic frequency adjustment, accurate temperature control, low noise rate, high energy efficiency
Higher water temperature
The highest water temperature can reach 75 degrees, which ensures an adequate and steady supply of hot water even in the cold winter
The inverter swimming pool heat pump adjusts the power frequency of the compressor and fan according to the different temperature of the water environment to achieve stepless speed regulation, which can achieve perfect heating while consuming low power. Make sure your swimming pool is at the temperature throughout the warm season of swimming.
Sunrain swimming pool heat pump is a smart and reliable solution to heat the pool and spa. With most of the energy absorbed from the air, Sunrain pool heat pumps can heat the pool and spa all year round with much less cost. Running at low cost and without CO2 discharging, people can enjoy swimming or spa at pleasant water temperature all over the year.
Features & Benefits Parameter
Toshiba GMCC inverter Compressor
R32 refrigerant, environmental friendly
DC inverter fan motor, super low noise
High pressure protection
WIFI function included (control heat pump with your cellphone easily)
Hydrophilic fin coil coating
Beautiful design with long lifespan
2 years warranty
The heat pump can heat and cool the swimming pool
Fan
Adopt bipolar speed change design, can automatically adjust the wind speed according to the ambient temperature, with over-voltage protection function.
Sapphire glass fiber fan blade, strong and durable, super quiet, high mechanical strength
Low voice
WIFI Control
Smart WIFI controller, anytime, anywhere, just click, no need to wait for hot water
Sunrain all in one heat pump water heater is a very smart design to provide domestic hot water for the house. With all in one type and water tank inside, it is very easy for installation and convenient for users.
Features & Benefits Parameter
Easy installation with all in one type
Higher water temperature output up to 75�°C
With sterilization funcation
Enamel water tank inside with long lifespan
High density foam with good insulation
Full automatically operation
Reverse cycle defrost with 4-way valve
100% factory tested
Top air in/out with duct,free of cool air
Intelligent controller
Simple operation, convenient life
Enamel water tank
Blue Shield special protection liner, thickness up to 2.0 mm, strong corrosion resistance; The high-density, ultra-thick, fluorine-free environmental insulation layer made by the heat insulation wall can effectively lock the heat.
Swimming Pool Heat pump are specially designed and engineered for pool or spa water temperature control. Intelligent control system are let the units high efficiency and stable working performance.
The COP could be 6.8 which saves at least 80% energy compared with traditional electric swimming pool heating equipments.
Suitable for large pools in hotel, public parks, schools, sport center, gyms, etc.
enter, gyms, etc.
Wholesale Constant Temperature Heater Swimming Pool Heat Pump
Main Features
1) PVC Titanium heat exchanger with full resistance against corrosion, more durable.
2) Compact structure, easy demountable for access.
3) High efficiency compressor, saving energy.
4) Flow switch for water flow protection.
5) Intelligent controller and adjustment by quick mind microprocessor.
6) Intelligent LCD display wired controller.
7) Air exchanger (fins-coil )with hydrophilic coating.
8) Automatic defrosting function included.
Optional: R410a, R32, R407c refrigerant is available.
Model YINI-010-YC
Heating mode Circulating
Ambient temp.range
Rated heating capacity 7.8KW
COP 6.7W/W
Rated input power 1.15KW
Max. Running Current 5.9A
Power supply 220V-240V 1N 50Hz
IP Code IPX4
Safety function High and low pressure protection, Overload protection, Temperature protection, Power phase sequence protection, etc.
Refrigerant type
R32
Compressor QTY
1 PCS
Compressor type
Scroll
outlet water temperature
28
Heat Exchanger
Titanium
Air Flow Direction Horizontal
Automatic defrosting
by 4 way valve
Casing Material
ABS plastic
Rated water flow
2.5 mh
Air out type
Top discharge
Fan motor QTY
1 PCS
Noise
56 dB(A)
machine dimension
Packing dimension
Net weight
44kg
Gross weight
55kg
This commercial hot water heat pump is the best solution for hot water supply of commercial project, and can work with advantages of high safety, stability, much convenience, energy saving, and environment friendly, which assures 24 hours comfortable hot water using. It is widely used in hot water project of school, hotel, hospital, supper market and other large building, which needs large water volume supply.
Commercial hot water heat pump series
Model
YINI-050S-RS
Heating mode
Circulating+Direct heat
Ambient temp.range
Rated heating capacity
18KW
COP
4W/W
Max. Running Current
9.7A
Power supply
380V 3N 50Hz
IP Code
IPX4
Safety function
High and low pressure protection, Overload protection, Temperature protection, Power phase sequence protection, etc.
Refrigerant type/weight
R407C/2.0kg
Compressor QTY
1 PCS
Compressor type
Scroll
Max. outlet water temperature
60
Water side heat exchanger type
Casing/high efficiency tank
Direct heat waterpipe nozzle
G1 Internal thread (inch)
Circulating waterpipe nozzle
G1 Internal thread (inch)
Air out type
Top discharge
Fan motor QTY
1 PCS
machine dimension
Packing dimension
Net weight
130KG
Gross weight
150KG
Detailed Images
Main Features
1) Copeland scroll compressor, quiet and high efficiency.
Salient Features
Highly efficient 3-Phase Water Filled Motor
- 100% EC grade copper winding
- Easily Rewindable
- Motor Designed with Higher Cooling Effect Ensures Longer Life
- Sustainable uniform performance for years
- Ensures long life durability
- Optimized Hydraulic & Mechanical Design
- Improved efficient performance
- Excellent output in Low Radiation
- Dynamically balanced design
- Zero maintenance
Product Specification
Power Range : 3.0 HP to 10.0 HP
Operating Speed : 0 - 2890 RPM
Operating Frequency : 0 â?? 50 Hz
Input Solar DC Power Range : 3000 Wp, 10000 Wp
Input Solar DC Voltage Range : 330 Vmp , 600 Vmp
Head Range : 10 Mtr , 50 Mtr
Discharge Range : 126000 LPD , 425000 LPD
Type of Duty : S1
Material Of Construction
Part Grade
Oil Seal : Nitrile butyl rubber
Motor Shaft : SS - 420
Motor Body : Cast Iron / J4
Motor Bush : LTB-4 / Teflon
Thrust bearing assembly : SS - 420 & Carbon
Base : Cast Iron
Bracket : Cast Iron
Flange : Cast Iron
Casing : Cast Iron
Impeller : Cast Iron
Highly efficient 3-phase Air Cooled motor
- 100% EC grade copper winding
- Easily Rewindable
- Good suction lift characteristics
- Sustainable uniform performance for years
- Ensures long life durability
- Optimized Hydraulic & Mechanical Design
- Improved efficient performance
- Excellent output in Low Radiation
- Dynamically balanced design
- Double shielded ball bearings, so no need of external lubrication
- Mechanical seal or stuffing box is provided as per customers requirement
- Zero maintenance
Product Specification
Power Range : 1.0 HP to 10.0 HP
Operating Speed : 0 2890 RPM
Operating Frequency : 0 - 50 Hz
Input Solar DC Power Range : 900 Wp, 10000 Wp
Input Solar DC Voltage Range : 110 Vmp, 600 Vmp
Head Range : 10 Mtr, 50 Mtr
Discharge Range : 45000 LPD - 405000 LPD
Max. Suction Head : 7 Mtr
Type of Duty : S1
Material Of Construction
Part Grade
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminium
