Supplier: Bonny light crude oil (blco), yemen light crude oil, jet fuel, diesel d2, d6, mazut, base oil, gasoline, cocoa bean and powder, petroleum products, coal, diesel, bitumen, petcoke, aluminum, hms, charcoal, wheat, sugar, milk, soybean, corn, beef, chicken, flour, meal, rye, frozen vegetable, okra, french fries, etc.
Services: Procurement, exporter
Product Name: Disposable Vinyl/Nitrile Blend Examination Gloves One-time use, no sterilization, no latex Single use, non-sterile, Latex free Model: S, M, L, XL Sizes: S, M, L, XL Color: blue, green, black, etc. Color: Blue, Green, Black etc. Structure: 5 fingers, with curling, regardless of left and right hands Structure: 5 fingers, beaded cuff for easy donning, ambidextrous Surface type: smooth surface Surface: Smooth Features : PVC/nitrile synthetic gloves are made of PVC resin and nitrile latex material. The product has PVC and The double advantage of nitrile gloves. The Vinyl/Nitrile Blend gloves is compounded with PVC paste and Nitrile latex, and the finished product has the advantage of both PVC and Nitrile glove. The donning feeling is better than vinyl gloves. Much softer than vinyl gloves Sturdy, wearable, longer wearing time than nitrile gloves The wearing time is longer than nitrile gloves. Has good wet hand wearability, easier to wear than nitrile and PVC gloves Easy donning with wet hands and easy donning than nitrile &vinyl gloves. PU coating, free of protein, effectively reduces the risk of allergies PU coating, with no protein in it, allergy risk is reduced effectively. Has better protection, has better acid resistance, alkali resistance and oil resistance Better protection, good resistance of acid, alkali and oil. Better cost-performance
Supplier: Cotton yarn, cotton and poly cotton fabrics, recycled yarn , grs certified , shoddy , wool waste , bed sheets, towels, kitchen towels, knitted bed sheets , jersey sheets, woven bedding, spinning waste, rice, sugar, cement, clinker, frozen chicken, frozen beef, edible oils, palm oil, wheat, soybean, corn, barley, bitumen, copper cathode, urea, aluminum ingot, sulfur, coal, ores, dap, pet coke, fertilizers, npk, base oil, petroleum products , mattress cover , pillow , micro fibre bed sheets , quilt , pink salt , himalayan salt
Services: Sourcing
Supplier: All type clothes, urea, all type agriculture and food items, all personal and entertainment items, all industrial and automotive items, all construction household and furnishing, all computers electronics and electrical, handicraft, items, npk, fertilizers t shirt, blanket,dry fruits, animal feeds, towel, bedsheets, toys, all grocery, copper wire scrap, copper ore concentrate, zinc ore concentrate, lead concentrate, fly ash, a4 paper, a3 paper, craft paper, occ, ldpe, hdpe , pvc resin, petroleum products, jp54, jet a1, crude oil, blco , biodiesel, diesel, fuel, coal, d2, petcock, pulses, mustard oil, spices , sanitizer, gloves, medical products, cement, core sand, old ships lng, lpg, all groceries items, food products, hms1 and hms2, fish, chicken feet, chicken paws, agri & food processing agriculture products, fertilizers, seeds, farm products grains, fruits, vegetables, river sands, aggregates, pvc electrical wire, rice, charcoal, wheat flour
Services: Export, import, merchant export import
Buyer: All metals, minerals, petroleum products, food products and paper products
* PHOSCAST Phoscast : Phosphate Bonded Castables * PURPOSE customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system. BACKGROUND * Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles. * GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates. Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion * Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected. APPLICATION Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.
APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.
Acid / Alkali Resistant Tiles/Bricks * Our Acid proof tiles, Acid alkali resistant tiles, Chemical resistant tiles are fully vitrified tiles which are manufactured using special non ferrous clay, processed at extremely high temperatures this process causes the raw materials to fuse and form a compact mass with an extremely low water absorption of less than 0.5% resulting in the formation of a very strong body with a flexural strength of 38 N/mm2, solid through color fade proof with a very hard surface Mohs hardness of 7. * The acid resistant tiles come in a range of sizes and thicknesses from ranging from 8-25mm. Our acid proof tiles meet stringent specification norms of IS 4457:2007 and relevant ASTM/DIN standards which ensure excellent performance in Acid/Alkali/Chemical (expect Hydrofluoric acid and its derivatives). Corrosion Protection Applications * Factory Floors subject to corrosion from Chemicals, Acids, Oil & Solvents * Pickling tank and surrounding areas * Food & Beverage Industry flooring * Battery rooms and Control rooms * Demineralization plants * Walls of washing and Paint shop areas * Acid Resistant Tiles Manufacturers India * Our acid proof tiles provide excellent abrasion resistance, anti-skid properties for worker safety and high aesthetic appeal. We also provide specialized corner tiles for reducing chances for acid attack through construction joints. Our standard sizes are 200x100, 200x200 & 300x300 millimeters.
Fuel Tanker Trailer 45000L
Mitsubishi MG400 Motor Grader Specifications Main Specifications Blade Width: 3710mm (standard blade width) Steering System: ATC Weight & Loads Operating Weight: 13,100kg Front Axle Load: 3,700kg Rear Axle Load: 9,400kg Dimensions Overall Length: 8490mm Overall Width: 2400mm Overall Height: 3360mm Wheelbase: 5910mm Tandem Wheelbase: 1520mm Ground Clearance: 355mm Engine Manufacturer: MTB Model: 6D22C Rated Output: 110.3kW (150 PS) @ 2000rpm Cylinders: 6 Bore x Stroke: 130 x 140mm Displacement: 11.2liters Hydraulic System Output Pressure: 17.2MPa Oil Flow Rate: 128L/min Transmission Type: DPS Speeds: 6 forward / 6 reverse Max Travel Speed: 45.0km/h (forward), 45.4km/h (reverse) Tires Front: 13.00-24, 14-ply Rear: 13.00-24, 14-ply Performance & Other Features Operation Type: Hydraulic (HYD) Scarifying Width: 1225mm Minimum Turning Radius: 6900mm Articulate Angle: 25 Fuel Tank Capacity: 230L Optional Equipment: BL(4000), S/C
