HIGH Quality graphite rod suitable for a wide range of applications in work hobby and workshop.
Product Introduction Graphite rods are mostly used in heating elements of high temperature vacuum furnace, it can still work at the temperature of 3000â??,and easy to oxidation at high temperature. they have low coefficient of thermal expansion, high heat conductivity, coefficient of resistance is 8~1310-6m, machinability is better than the sic�mosi2, and they are good resistance to high temperature, price is also cheap. According to requirements of customers, top graphite rods supplier-DJX Graphite Manufacturing Co., Ltd can customize the graphite rods and other graphite machining products. equipped with domestic advanced processing technology and equipment and experienced machining technical personnel to meet the needs of the graphite market today. Different specifications: 1.Superfine graphite rod; 2.Fine extruded graphite rod; 3.Medium extruded graphite rod; 4.Large graphite rod
Graphite Round Stick for Gold Silver Casting There are two types of graphite rod, blank material (unmachined graphite rod) and finished product (machined graphite rod). Graphite rods are often used as electric heating elements in high-temperature vacuum furnaces. The maximum operating temperature can reach 3000�?�°C. It is easy to oxidize at high temperatures, it can only be used in neutral or reducing atmospheres and vacuum furnace. Its thermal expansion coefficient is small, thermal conductivity is large, resistivity is (8~13) 10-6 m, easier to process than SiC, MoSi2 rod, high temperature resistance, extreme cold and extreme heat resistance, good price Cheaper.
Molded graphite Molded graphite materials we supplied are divided into two series: fs series /fb series . They have high anisotropy. The materials provide extremely wide characteristics such as mechanical strength, friction and conductivity, which can be further enhanced by impregnation with resins or metals. Special materials can be processed by pressing components directly close to final sizes. The press-to-size-technology reduces the cost of machining in large quantities. Wooden box
Product description: Copper coated graphite powder is a kind of new material produced by our factory, its specific gravity is higher than graphite and lower than copper, it overcomes the disadvantages of the mechanical mixing powder in the old technology, such as difficult to mix evenly and easy to form segregation due to big density difference ( copper 8.8ã103kg/m3, graphite 2.2ã103kg/m3) and bad dispersibility of graphite powder. At the same time, carbon and copper interface can only be connected by mechanical interlock, the bonding strength between the interfaces is low, which causes unstable product quality. For graphite and copper of high temperature infiltration, even when the temperature is up to 1100â the wetting angle is 140 it is very difficult for graphite to form evenly suspending distribution state in copper solution, and easy to have segregation. The copper coated graphite powder produced by our company is to make the graphite surface to be coated with one layer of continuous copper first, so the graphite distribute evenly between the copper. It is easy for copper to form three-dimensional grid structure, the interface bonding strength is high, which improves the product quality, it can be widely used as adding material in the production of motor brush, self-lubricating bearing, spray, liquid metallurgy material and so on. Copper content:25-95 Fineness:200-800 mesh
Supplier: Graphite plates and rods
Supplier: Graphite plates and rods
Jiangxi Ningheda New Material Co., Ltd. focuses on graphite materials with medium and coarse structure (grain size 2mm, 0.8mm). Professional processing of some graphite products: 1. Graphite materials and carbon materials for graphitization furnaces; 2. Various types of graphite tube series; 3. Graphite plate series; 4. Graphite crucible series; 5.25/50mm light rod; various types of carbon blocks, furnace bottom blocks; 6.diameter 100, 150, 200 graphite rod, graphite electrode.
Graphite crucible is an indispensable consumable part in the production of vacuum aluminized film. Vacuum aluminization has very strict requirements on the quality of graphite crucible. The quality of graphite crucible will directly affect the production quality and production cost of aluminized film.Our graphite crucible â??s density reach 1,9g/cm3. It greatly improves the oxidation resistance and service life of the crucible without cracking, generally more than 25 times, up to 80 times. Size:120 *120; 120 *110; 135 *120 and special specifications can be made according to customer requirements. The company uses patent technology with intellectual property rights to treat graphite materials with anti-oxidation and anti-leakage, which greatly improves the oxidation resistance, bulk density, flexural and compressive strength of graphite crucibles, enhances corrosion resistance, hardness, reduces porosity and permeability, and greatly weakens molten aluminium and gaseous aluminium molecules. Anti-oxidation, non-overflow, non-cracking, non-aluminizing, good evaporation effect, long service life, the average use of furnace to 18,600 meters, coil 50-60 times, 24,000 meters, coil 40-50 times, production of 12,500 meters, coil, 10,000 meters, coil, 9000 meters, coil, 5000 meters, the number of coil stoves will also be greatly improved.
Graphite crucible has good thermal conductivity and high temperature resistance, the use of high temperature, the thermal expansion coefficient is small, the rapid heat, quenching has a certain anti-strain properties. Right acid, alkaline solution, strong corrosion resistance, with excellent chemical stability. Characteristics of molded graphite 1.Good electric conductivity and high thermal conductivity 2.Low thermal expansion and high resistance to thermal shock. 3.The strength increases at high temperature, and it can withstand over 3000 degrees. 4.Stable chemical property and hard to react 5.Self lubrication 6.Easy to process
