Steel billets result from the second stage of the steel production process. They are hot-rolled or forged from an ingot or strand cast. steel billets from 45 x 45 mm to 150x150 mm, and round steel billets from 120 mm to 270 mm in diameter. Length : Specifiable up to 12 m Quality : In various internationally well known standards including afnor (nf), aisi, astm, bs, din, euronorm, gost, jis, iso, sae, si, ts, uni, etc. (eg. Astm a 615 gr 40 or 60, bst 420 s, din 488, st 37.2 din 17100, nfa 35015 and 16, bs 4449 (gr 250 or 460), jis g 3112 (sd 30, 35, 40), si 739 s 400, si 739 s 400 w, feb 44 k, 3 sp/ps or 5 sp/ps gost 380 88, 35 gs or 25 g2s, gost 5781-82, etc) Other grades available according to customer's request
STEEL BILLETS 3SP AND 5SP ORIGIN : SAUDI ARABIA, QATAR, TANZANIA, INDIA, CHINA, MUSCAT Steel billets of various dimensions available. These are available in the following sizes (mm): 100X100 ; 120x120; 125x125; 130x130 ; 150x150S Standard : JIS G3141, ASTM A653, GB, Ghos 380, BS 4449, EN 10025
Features Of Steel Billets Steel billets result from the second stage of the steel production process. They are hot-rolled or forged from an ingot or strand cast. Smaller and longer than a bloom, billets are usually a square cross-section less than 36 square inches. They are used for the manufacture of all ‘long’ steel products such as bars, rods, pipes, tubes, wire and wire products.
Steel Billets
We supply high-quality Continuously Cast Square Billets of various cross-sections and length depending upon the requirement of our customers
We sell Used Rails, HMS, Steel Scaps, Copper Scraps, Aluminum Scraps, Mill Scales with large quantites and competitive prices, If you have such demand, pls feel free to contact us. Payment terms TT Only
We are pleased to offer USED RAIL from Saudi. We Offer Used Rails from Saudi Arabian Factory. SPECIFICATIONS: USED RAILS R50 / R65 SIZE : CUT UNDER 1.5 Buyers are invited to Saudi Arabian Factory Warehouse to Visit and Inspect Used Rails and then Open LC MT 700. Specifications are available.
SPECIFICATIONS: the following Percentage Points: Chemical Composition Carbon - 0.54 to 0.82% Phosphorus - 0.035% max Manganese - 0.60 to 1.05% As. - 0,01max of Mass share Silicone - 0.18 to 0.40% Sulphur - 0.035% max Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75 The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m) Used Rails shall be considered free of alloys when the residual alloying elements do not exceed Cut to 1.5 meter length (standard) 1. Technical terms: USED RAIL R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.
Product Description R50-R60: used long rail steel scrap in compliance with ISRI standard classification R50 (51.67 kg/m), Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switches, and guard rails, or rails with split rail. Price of product ( USD price or FOB price) : USD 250 - 260 per MT Product origin : Europe Key Specifications/Special Features : Nominal Chemical Composition. Carbon (C) 0.20% to 0.60% Manganese (Mn) 0.60% to 0.90% ... Nominal Specification for R50 51.67 kg/m GOST 7173-75. Carbon (C) 0.40% to 0.58% Manganese (Mn) 0.75% to 0.88% ... Nominal Specification for R65 64.72 kg/m GOST 8165-75. Carbon (C) 0.40% to 0.58% Manganese (Mn) 0.75% to 0.8" Minimum Order Size and Packaging details : 12500 MT
