Dear Sir/ Madam, We are pleased to offer you Hot Briquetted Iron Chips with Libyan origin. Below is the Chemical composition: CHEMICAL COMPOSITION: Iron (Fe) - 86% min Alumina (Al2O3) - 2.5 max Silica (SiO2) - 3.5 max Phosphorus (P) - 0.08 max Sulphur (S) - 0.08 max PHYSICAL SIZE (On Natural Basis) 6.5mm - 14mm: 70% min 14mm - 16mm: 20% max 16mm - 18mm: 10% max Analysis report is available upon request. Please let us know any interest. Thanks & Best Reagrds, Maria Lorena C. Sioson
Supplier: Hot briquetted iron (hbi)
Supplier: Hbi Hot Briquetted Iron Ore
Supplier: Hbi fines, hot briquetted iron fines, sintering plants
Supplier: HBI fines, hot briquetted iron fines, sintering plants
Supplier: Sponge iron, dri, direct reduced iron, hbi, hot briquetted iron, cold briquetted iron, cement, clinker, garnet, blast furnace slag, bentonite, dolomite, limestone, quicklime, quick dolomite, bitumen
Cold Briquetted Iron (CBI) is defined as DRI which has been molded at a temperature less than 650 �°C or with a density of less than 5000 kg/m3. Due to the raw material sharp shortage for steelmaking in many countries worldwide, a need arises to find a substitute material to replace the rare pig iron and expensive steel scraps that were used by steelmaking plants. 1- More density and less porosity The apparent density of CBI is about 8.3 grams per cubic centimeter and the density of DRI is about 2.3 grams per cubic centimeter. On the other hand, the volumetric porosity of these two products is about 30 and 50%, respectively. These two factors reduce the environmental reactivity of CBIC and its lower transportation costs. 2- Less fine The wear resistance and higher mechanical strength of CBI compared to sponge iron causes less softening to occur during the handling of the product, and as a result, both the economic value of the product is prevented and the charge losses of the product in the steelmaking furnace are prevented. is significantly reduced. 3- Easier to store and carry Due to the lower reactivity of CBI compared to DRI, the loss of metal grade of the product during storage and transportation is significantly reduced, which will reduce the amount of economic value loss of the product from the time of production to the time of use in the steelmaking furnace. On the other hand, sea transportation of CBI leads to a reduction in transportation costs compared to DRI due to the absence of the need to apply neutral gas to prevent product activation. 4- More thermal and electrical conductivity The thermal and electrical conductivity of CBI is about 2 times that of DRI. This higher conductivity of CBI improves the distribution of heat created in the steelmaking furnace and, as a result, accelerates the melting process of iron materials. This will mean reducing the melting time of the steelmaking process and improving the production capacity of the steelmaking unit. 5- Carbon adjustment The presence of carbon in steelmaking furnaces is necessary in order to provide carbon for the final steel product, prevent excessive losses of iron, and also regulate the physical and chemical conditions of the slag. Usually, induction furnaces require low-carbon iron materials, but in electric arc furnaces, high-carbon iron materials are more attractive. The unique feature of CBI product is the ability to adjust its carbon content in the range of 0.5 to 4% by weight and based on the needs of customers.
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
