Supplier: Rapid detection kit, ribonucleic acid detection reagent, medical syringes, medical mask, medical ventilator, medical glove, medical isolation gown, surgical gown level 3+4, protective gown (overall ), oximeter, other medical products
Blue face masks flat Non Woven Thick 3-Layers disposable Breathable Facial Masks with Earloop 3-i: 3 layer pleated mask has folds that expand to offer full coverage over nose and mouth. The Length is 6.8 inch and the width is 3.8 inch. Less Bulk = Better Breathability --- A Nanofiber inner layer allows face masks to be thinner than most other disposable masks because Nanofibers are 1000 times thinner than a human hair. This means less bulk but a better breathing experience while blocking out fine particles in the air such as saliva, dust and, pollen. Comfortable - Extra-soft elastic ear loops eliminate pressure to the ears for maximum comfort. Can be used with earloop holders/ mask strap extenders for additional comfort and well-being. Upgraded Nose Clip & Ear Loop-- The Extra-soft elastic ear loops could eliminate pressure to the ears for maximum comfort. It can be used with earloop holders for additional comfort � Widely Applicapable Indoor&Outdoor Facial Masks for Daily Uses-- Our personal protective masks are worn all over the world in most common workplace environments. They are suitable for public transportation, shopping, school, and other public settings. 3-Layered Protection-- The disposable face mask is made of Premium Melt-Blown Cloth; the outer layers is a high-quality non-woven fabric and the center layer is a filtration non-woven fabric.
Supplier: Medical, surgical, industrial and paper products & chemicals
Surgical Gown LEVEL 2-LEVEL 4Blue AMMI Level 2-3 Gown Disposable Medical PP Non-woven Gown SURGICAL GOWNS � Surgical gowns are personal protective equipment used by many people in health care. Surgical gowns are used by surgeons and the surgical team for all types of procedures. Modern surgical gowns provide a breathable, protective barrier for the surgeons and all health care providers. � Surgical gowns provide a barrier protection to prevent blood strikethrough and fluid contamination. Most surgical gowns are sterile and come in a wide variety of sizes and versions. Surgical gowns can be purchased alone or within surgical packs. There are many surgical packs for frequently performed procedures. � Surgical gowns are produced non-reinforced or reinforced. Non-reinforced surgical gowns are less durable and designed for surgical procedures with low to moderate fluid contact. Reinforced surgical gowns have reinforced protection in specific critical areas for more invasive and intense surgical procedures. Surgical gowns cover and provide a barrier for important areas from the shoulders to the knees and wrists. Surgical gowns are usually made with Set-In sleeves or Raglan Sleeves. Surgical gowns come with and without a towel. Most surgical gowns are made from a fabric called SMS. SMS stands for Spunbond Meltblown Spunbond. SMS is a lightweight and comfortable non-woven fabric that provides a protective barrier. Surgical gowns are usually rated by their AAMI level. AAMI is the Association of the Advancement of Medical Instrumentation. AAMI was formed in 1967 and they are a primary source of many medical standards. AAMI has four protection levels for surgical gowns, surgical masks, and other protective medical equipment. Level 1: is used for Minimal Risk of exposure situations, such as providing basic care and cover gowns for visitors. Level 2: is used for Low Risk of exposure situations, such as during common blood drawing procedures and suturing. Level 3: is used for Moderate Risk of exposure situations, such as surgical procedures and inserting an Intravenous (IV) line. Level 4: is used for High Risk of exposure situations, such as during long, fluid intense surgical procedures.
Surgical gowns 35g level 2 disposable blue surgical medical gowns SURGICAL GOWNS Surgical gowns are personal protective equipment used by many people in health care. Surgical gowns are used by surgeons and the surgical team for all types of procedures. Modern surgical gowns provide a breathable, protective barrier for the surgeons and all health care providers. Surgical gowns provide a barrier protection to prevent blood strikethrough and fluid contamination. Most surgical gowns are sterile and come in a wide variety of sizes and versions. Surgical gowns can be purchased alone or within surgical packs. There are many surgical packs for frequently performed procedures. � Surgical gowns are produced non-reinforced or reinforced. Non-reinforced surgical gowns are less durable and designed for surgical procedures with low to moderate fluid contact. Reinforced surgical gowns have reinforced protection in specific critical areas for more invasive and intense surgical procedures. � Surgical gowns cover and provide a barrier for important areas from the shoulders to the knees and wrists. Surgical gowns are usually made with Set-In sleeves or Raglan Sleeves. Surgical gowns come with and without a towel. Most surgical gowns are made from a fabric called SMS. SMS stands for Spunbond Meltblown Spunbond. SMS is a lightweight and comfortable non-woven fabric that provides a protective barrier. � Surgical gowns are usually rated by their AAMI level. AAMI is the Association of the Advancement of Medical Instrumentation. AAMI was formed in 1967 and they are a primary source of many medical standards. AAMI has four protection levels for surgical gowns, surgical masks, and other protective medical equipment. Level 1: is used for Minimal Risk of exposure situations, such as providing basic care and cover gowns for visitors. Level 2: is used for Low Risk of exposure situations, such as during common blood drawing procedures and suturing. Level 3: is used for Moderate Risk of exposure situations, such as surgical procedures and inserting an Intravenous (IV) line. Level 4: is used for High Risk of exposure situations, such as during long, fluid intense surgical procedures.
Recycle surgical gowns hospital medical use green gown reuse over 100 times Surgical Gowns Surgical gowns are personal protective equipment used by many people in health care. Surgical gowns are used by surgeons and the surgical team for all types of procedures. Modern surgical gowns provide a breathable, protective barrier for the surgeons and all health care providers. Surgical gowns provide a barrier protection to prevent blood strikethrough and fluid contamination. Most surgical gowns are sterile and come in a wide variety of sizes and versions. Surgical gowns can be purchased alone or within surgical packs. There are many surgical packs for frequently performed procedures. Surgical gowns are produced non-reinforced or reinforced. Non-reinforced surgical gowns are less durable and designed for surgical procedures with low to moderate fluid contact. Reinforced surgical gowns have reinforced protection in specific critical areas for more invasive and intense surgical procedures. Surgical gowns cover and provide a barrier for important areas from the shoulders to the knees and wrists. Surgical gowns are usually made with Set-In sleeves or Raglan Sleeves. Surgical gowns come with and without a towel. Most surgical gowns are made from a fabric called SMS. SMS stands for Spunbond Meltblown Spunbond. SMS is a lightweight and comfortable non-woven fabric that provides a protective barrier. � Surgical gowns are usually rated by their AAMI level. AAMI is the Association of the Advancement of Medical Instrumentation. AAMI was formed in 1967 and they are a primary source of many medical standards. AAMI has four protection levels for surgical gowns, surgical masks, and other protective medical equipment. Level 1: is used for Minimal Risk of exposure situations, such as providing basic care and cover gowns for visitors. Level 2: is used for Low Risk of exposure situations, such as during common blood drawing procedures and suturing. Level 3: is used for Moderate Risk of exposure situations, such as surgical procedures and inserting an Intravenous (IV) line. Level 4: is used for High Risk of exposure situations, such as during long, fluid intense surgical procedures.
Supplier: Russia and non russia oil and gas (kazakhstan, qatar, netherlands) oil and gas products such as en590 10ppm, d6, jet fuel a1 & 54, lng, lco, ago, d2, espo, pet coke, sulphur, urea 46 granular/prilled and others. in addtion, nitrile gloves, face mask, covid testing kits, and other ppe products to overseas including the usa & europe & other countries.
Terumo Runthrough NS PTCA is a medical device designed for use in percutaneous transluminal coronary angioplasty (PTCA) procedures. PTCA is a minimally invasive procedure used to treat coronary artery disease by widening narrowed or blocked coronary arteries. Here are some key points about the Terumo Runthrough NS PTCA: Manufacturer: Terumo Corporation is a Japanese company known for its medical devices and healthcare products. Type: The Runthrough NS PTCA is a guide wire used in PTCA procedures. Guide wires are essential tools that help navigate catheters and other interventional devices through blood vessels during angioplasty. Function: The guide wire assists in guiding and positioning the catheter within the coronary arteries. It helps the interventional cardiologist navigate through the blood vessels and reach the site of the blockage or narrowing. Features: The "NS" in Runthrough NS may refer to "non-support" or "normal support," indicating the level of support provided by the guide wire. The choice of guide wire depends on factors such as the location and severity of the arterial blockage. Usage: The Terumo Runthrough NS PTCA guide wire is specifically designed for use in PTCA procedures to help facilitate the placement of angioplasty balloons and stents.
he Terumo Runthrough NS PTCA (Percutaneous Transluminal Coronary Angioplasty) guide wire is a product manufactured by Terumo Corporation, a global medical device company. Guide wires are essential tools used in cardiovascular procedures, particularly in angioplasty and stenting, to navigate through blood vessels and provide support for the delivery of catheters and other interventional devices. Key features and characteristics of the Terumo Runthrough NS PTCA guide wire may include: Hydrophilic Coating: Many Terumo guide wires, including the Runthrough NS, are known for their hydrophilic coating. This coating facilitates smoother navigation through blood vessels, reducing friction and enhancing steerability. Flexible Design: The guide wire is designed to be flexible, allowing it to navigate tortuous vessels and reach target locations with precision. Radiopaque Tip: The tip of the guide wire is often radiopaque, making it visible under fluoroscopy or other imaging modalities. This feature helps interventional cardiologists visualize the position of the guide wire during the procedure. Different Tip Configurations: Guide wires may come with different tip configurations, such as soft or floppy tips for ease of navigation or more supportive tips for crossing lesions. Various Lengths and Diameters: Terumo typically offers guide wires in various lengths and diameters to accommodate different patient anatomies and procedural requirements.