DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Base material:solid brass, ss304, ss316 Finish:chrome, satin nickel, pearl satin,pss-polished ss, sss- satin stainless steel, pvd, gold, brass polished For use on: tempered glass thickness 6mm to 12mm glass Edges:straight egdes/beveled edges Recommended glass door weight for three hinges:heavy duty hinges: 3 hinges- 54kgs Recommended glass door weight for two hinges: heavy duty hinges: 2 hinges- 34kgs Glass cuts: square glass cut, ear mouse glass cut, round glass cut Glass door swing:90,135, 180 degree, full swing.
1> Feature : Adjustable 2> 90° wall mount hinge , 180° glass to glass 3> Glass thickness : 8 mm~12 mm 4> Max door weight : 36 kg (with 2 hinges) 5> Material : Solid Brass 6> Some models do have auto self-closing function within 25° at both sides 7> Mickey Mouse ear design.
1. Hand Rail Bracket 2. SS304, SS316 3. Satin Finish, Mirror Polished 4. Two caps plates with Nylon spacer-Diameter of the cap plates in 38mm,including one curve plate(suitable for 50.8mm) and one flat plate, with suitable counter sunk screws.
- For glass 10mm and 12mm thickness - Material : Available in SS304, SS316, SS316L - Dimensions 49*40*26 ( 165 grams), 62*44*27 ( 280 grams) - Mirror polished or Satin Stainless Steel.
1> Shower Knob. 2>Glass thickness : 1/4"~1/2", 6 mm~12 mm 3> Available in shapes: Square, cylindrical, conical etc. 4> Size: 28mm x 33mm, 30mmx30mm, 25mmx43mm etc. 5> Solid Brass, Zinc Alloy 6> Chrome plated, Brushed Nickel, Brass Polished, Polished Chrome, Gold Plated, Oil Rubbed Bronze. Keywords: Shower Door Knobs, Glass Door knobs
1> Back To Back Towel Bars(with and without metal washers) 2> Pull handled available in various sizes with back to back Towel bars 3> Glass thickness : 6 mm~12 mm 4> Size: 19 x 6"/8"/10/12"/18"/24" C/C 5> Material :304 Stainless Steel / #62 Brass Tubular 6> Chrome plated, Brushed Nickel, Brass Polished, Polished Chrome, Gold Plated, Oil Rubbed Bronze.
Solid brass with chrome plated one half has m6 304ss pin length 40mm with tapered end 22mm exposed balance inside hinge Other halve has hole for m6 pin, screw holes to be chamfered 4 screws mild steel m6 hex x 8mm long posi drive per hinge (anti vibration screws) Weight :90gms include ss pins
1. Available in different models 2. CNC machined precision pivot pins 3. Glass to Glass, wall to Glass shower door bi-fold hinges. 4. Glass thickness: 6 mm~10 mm 5. Max door weight: 23 kg (with 2 hinges) 6. Feature: 14mm Diameter hole required (non cutout),free swinging 7. Material: SS304 8. Closing angles 180°degree. 9. Straight edges, beveled edges, round edges. 10. Glass preparation- 14mm Diameter hole required. 11. Chrome plated, Brushed Nickel, Gold Plated, Oil Rubbed Bronze.
