Product : Titanium Brand : Renaissance Pipe Fitting Inc. Sizes : Refer the specification Condition : New Rating : 4.6, based on 21 reviews price : Start from 20 USD RFP India is Indias wellknown manufacturer supplier and exporter of Titanium which is a metallic element and is being recognized for its high strengthtoweight ratio It is a strong metal with low density that is quite ductile lustrous and metallicwhite in colour The relatively high melting point probably over 1650 C or 3000 F makes it useful as a refractory metal Titanium is used in steel as an alloying element ferrotitanium to reduce grain size and as a deoxidizer and in stainless steel to reduce carbon content Applications for titanium mill products sheet plate bar wire forgings castings can be found in industrial aerospace recreational and emerging markets Powdered titanium is used in pyrotechnics as a source of brightburning particles Titanium pipes tubes
Standard ASTM B348 / ASME SB348 Dimensions ASTM, ASME and API Round Bars Size 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length. Round bar Diameter 3-~800mm Hex Bar size 2-100mm A/F Square bar size 4 to 100mm Flat bar Thickness 2 -100mm Flat bar Width 10 to 500mm Length 3 to 6 meter, Custom Cut Lengths Form Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Ingot, Forging Etc.,
Standard ASTM B348 / ASME SB348 Dimensions ASTM, ASME and API Round Bars Size 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length. Round bar Diameter 3-~800mm Hex Bar size 2-100mm A/F Square bar size 4 to 100mm Flat bar Thickness 2 -100mm Flat bar Width 10 to 500mm Length 3 to 6 meter, Custom Cut Lengths Form Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Ingot, Forging Etc.,
Product Introduction TC4 titanium rod for aviation, also known as TC4 titanium alloy rod, Gr5 titanium rod, or Ti-6Al-4V titanium rod, the composition of titanium alloy TC4 material is Ti-6AI-4V, which belongs to (a²) type titanium alloy , with good comprehensive mechanical and mechanical properties. It has a series of advantages such as excellent corrosion resistance, small density, high specific strength, good toughness and weldability, and has been successfully applied in aerospace, petrochemical, shipbuilding, automobile, pharmaceutical and other departments. TC4 titanium rods for aviation are mainly used in petroleum exploration equipment accessories, aerospace, shipbuilding, titanium processing parts for automobiles, standard parts, customized parts, etc., with high strength, good toughness, excellent welding performance, and wide application. Product parameters Product name: TC4 titanium rod, TC4 titanium alloy rod for aviation 1. Grade National standard: TA1, TA2, TA3, TA9, TA10, TC4, TA18, ERTI-1, ERTI-2, Ti15333 American Standard: GR1, GR2, GR3, GR5, GR7, GR12, GR5, GR9 2. Manufacturing process: hot forging + turning (grinding) light 3. Delivery status R (hot working state) M (annealing state) 4. Diameter (mm): 1-200 5. Implementation standards: GB/T 2965, GB/T13810, ASTM B348, ASTM F136, ASTM F67, AMS 4928 Features Titanium rods have excellent properties such as high strength, good corrosion resistance, good low temperature performance, high chemical activity, and low thermal conductivity. Mechanical properties of TC4 titanium alloy: 1. Tensile strength b/MP 895, specified residual elongation stress 0.2/MPa 825, elongation 10, reduction of area 25 2. Density of titanium alloy: 4.5 (g/cm3), working temperature -100 550 3. TC4 titanium alloy chemical composition: TC4 contains titanium (Ti) balance, iron (Fe)
CDM Titanium is an approved ISO9001:2015 & PED 14/68 EU by TUV and a professional manufacturer and exporter of titanium material and product. We manufacture Titanium bar and titanium rod: Grade : GR1, GR2 , GR3, GR4, GR5, GR7, GR9,GR12,GR16,GR17 etc Forged Bar: diameter (26-200) Ã?? less than or equal to 4000 Rolled Bars: diameter (8-25) Ã?? less than or equal to 1500 Standard: ASTMB348, AMS4928, ASTM F67,ASTM F136, H7/h7 tolerance is available.
Titanium Bar GR7 has excellent strength, hardness, lightweight, high-temperature resistance, low-temperature resistance, good mechanical processing performance, excellent corrosion resistance, non-magnetic and non-toxic, and good heat transfer performance. At the same time, it has memory and superconductivity. The composition of Titanium Bar GR5 is Ti-6Al-4V, which belongs to (α+β) type titanium alloy, with good comprehensive mechanical and mechanical properties. It has excellent corrosion resistance, small density, high specific strength, good toughness and weldability, and has been successfully applied in aerospace, petrochemical, shipbuilding, automotive, pharmaceutical and other sectors. The titanium round bar is mainly used in aerospace structures, engine parts, ships, medical implants and equipment, hydraulic and instrumentation pipes, cryogenic vessels, heat exchangers that require high strength. It is also used in a variety of chemical process equipment and ship and fuselage applications where corrosion resistance is required. Titanium Filler Rod is a hollow filter tube made of titanium powder by high temperature sintering. It is mainly used for titanium rod filters. It is non-toxic, non-magnetic, non-shedding, and has good bio-melting properties. Therefore, it is widely used in liquid-solid separation in food, beverage, pharmaceutical, chemical and other industries. It is especially suitable for decarbonization filtration in large infusion and injection production lines in the pharmaceutical industry. https://www.yunchtitanium.com/titanium-bar-1
Material: GR. 1, GR. 2, GR. 3, GR. 4, GR. 5, GR. 7, GR. 9(TI-3AL-2.5V), GR19. Titanium bar, titanium rod 1)size: diameter 8-200mm, length as customer`s requirements(up to 6100mm) 3)standards: ASTM B348, ASME SB348, AMS 4928, ASTM F67, F136 4)surface: brightness, pickling 5)packing: export case 6)process method: hot rolling 7)moq: 50kg (sample is available ) 8)trade term: fob shanghai 9)delivery time: 7-20days 10)mtc available.
Titanium bar/Titanium metal rod StandardASTM B265 JIS H4600 GB/T 3620.1 ASTM Pure Ti: Gr.1 Gr.2 Gr.3 Gr.4 Ti Alloy: Gr.5 Gr.7 Gr.9 Gr.11 Grades JIS Pure Ti: Class 1 Class 2 Class 3 Class 4; JIS Ti Alloy: Class 60 Class 12 Class 61 Class 11 Class 60 E GB Pure Ti:TA1 TA2 TA3 TA4;Ti Alloy: TC4 TA9 TC2 TC4 ELI Shape Round Bar / Square Bar/ Hexagon Bar Diameter 1.0mm to 300mm Surface finishPolished Heat TreatmentUsually are Annealled,but Solid Solution & Aging can be also OK
Titanium Bar/Rod Products Details Place of Origin: China (Mainland) Brand Name: TXM Model Number: YZ-Ti-BAR Application: Industrial Shape: Round Length: MAX:6000mm Technique: Forged Grade: Titanium weight: D*D*3.542*L/1000000 Product name: High Quality ASTM B348 gr2 gr5 forged round Titanium Bar for sale Standard: ASTM B348 AMS4928 ASTM F136 ASTMF67 Surface: acid surface or polishing, sand blasted surface Test Report Support: Chemical Position Mechanical Prosperity Certificate1: ISO 9001:2008 Certificate2: SGS Color: Metallic Condition: R M Y Tolerance1: h6~h13 Tolerance2: H10~H13 Diameter: 5~350mm
