LED Flood Light is a new generation with high luminous efficacy. Protected IP 66 with front toughened glass. LED Flood Lights are used for small to medium size bill boards, Parking areas, Building complexes and colonies, Security lighting, General area lighting, Lighting of monuments, etc. Pressure die-cast aluminium LED housing designed to act as heat sink for efficient dissipation of heat. Electrochemically brightened and anodized aluminium reflector with modular lens. Heat resistant toughened glass provided with gasket and SS clips to ensure ingress protection of IP66. LED Colour Temp.: 6000K - 500K Luminaires provided with a mounting bracket for aiming adjustment. The driver used is specially designed to have built-in 4-6 KV surge protection, open/short circuit protections. Finish: Powder coated. Beam Angle: 120 Degree. 5 years warranty. PRODUCT CODE WATT PF CCT CRI THD LM/W LZFLPOL300WIP66 300W >0.95 6500 >80 0.95 6500 >80 0.95 6500 >80 0.95 6500 >80
I m2 ex d i, ii 2gd ex d td a iib t3-t4t tmax. Surf. Ip 65 ex. Technical description: luminaire consists from body, basic plate and Flange with protective glass. Body and flange are castings from grey cast Iron treated with polyester powder paint. Luminaire can be suspended By the steel pendant with 2 eyes o 18 mm on the upper part of the Body. Connecting area (increased safety „d“), with connecting clamps and 2 cable glands, is placed on the side of luminaire. Flange cable glands No. 3-99.5747/1 from grey cast iron are designed for cable o 10 - 16 Mm (no. 3-99.6170/1 for o 16 – 20 mm optionally). Area is enclosed With cover from grey cast iron. Steel basic plate with electric parts And reflector is fixed in the body. Flange with glass cover is screwed In the body and secured with locking screw and silicon sealing Against unlocking, thread shapes a rift of flameproof enclosure „d“. Protective hardened glass resistant against mech. Shock min. 7 j is Fixed to the flange, the connection is filled with polyurethane putty. A steel hinge is fixed to the flange as the mobile one and enables to Hang the flange during mounting or dismounting. Steel parts are Galvanized and chromated. Luminaire is equipped with protective guard from steel wire. Max. Section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases. Luminaire is equipped with 2 inner and 1 outer earthing clamps for conducting connection. Luminaire is designed as the through-way one for 4-core cable; when used as the end piece, there is necessary to use blinding plug (optionally on order). Packing carton is filled with polyurethane foam instapak. Luminous sources: Spc 300 and 500w, with ballast box hql 250w, 400w, nav-e 210, 350w Carton (mm/pcs) 560x300x30mm, weight 24 kg/pc
Technical description: luminaire consists from body, basic plate and flange With protective glass. Body and flange are castings from grey cast iron treated With polyester powder paint. Steel pendant with eye o 18 mm is fixed to the Upper part. Connecting area (increased safety „d“), with connecting clamps And 2 cable glands, is placed on the side of luminaire. Flange cable glands No. 3-99.5747/1 from grey cast iron are designed for cable o 10 - 16 mm (gland No. 3-99.6170/1 for cable o 16 - 20 mm). Area is enclosed with cover from Grey cast iron. Steel basic plate with electric parts and reflector is fixed in the Body. Flange with glass cover is screwed in the body and secured with locking Screw and silicon sealing against unlocking; thread shapes a rift of flameproof Enclosure „d“. Protective hardened glass is resistant against mech. Shock min. 7 j and is fixed in the flange, the connection is filled with a polyurethan putty. A steel hinge is fixed to the flange as the mobile one and enables to hang Up the flange during mounting or dismounting. Steel parts are galvanized And chromated. Luminaire is equipped with protective guard from galvanized Steel wire. Max. Section of connecting conductors 4 mm2. Three-pole connecting Terminal block enables interchanging 2 phases (4-core cable). Luminaire Is equipped with 2 inner and 1 outer earthing clamps for conductive connection. Luminaire is designed as the through-way one, when used as end piece, there is Necessary to use blinding plug (optionally on order). Packing carton is filled with Polyurethane foam instapak. Luminous sources: Hwl160 w e27, dulux d26 w g24d-3, bulb100w/220 e27, nav-e 110 w e27, hql125 w e27, nav-e 50/l 50 w e27, hql 80 w e27, clas 200 w e27, master pl e 23 w e27 and next Carton (mm/pcs) 430x240x240, weight 18 kg/pcs
2G Ex de IIC T4-T6 Gb II 2G Ex de IIC T4-T6 Gb II 2D Ex t IIIC T max.surf Db Luminaire consists of body, basic plate and flange with protective glass. Body and flange are made of AlSi alloy treated with polyester powder paint. Luminaire can be suspended by the help of steel pendant with eye o 18 mm. The connecting area (increased safety „e“) is placed on the side of the body and equipped with connecting clamps and 2 cable glands HSK-K-Ex M25x1.5 for cables o 9-16 mm. Area is enclosed with cover and sealed with silicon. There is aluminium basic plate with electro-module mounted inside the luminaire. Electro-module consists of 20 x LED CREE XP-G (luminous flux 4000 lm, lumen per watt 88 lm/W, colour temperature 3700-5000, Colour Rendering Index ~80, guaranteed life-time min. 50.000 hrs.) and cooling unit. Input of the luminaire is adjustable (45W/22,5W) by changing output current of the LED driver 700mA/350mA. Flange with protective glass is screwed in the body and locked with securing screw; thread shapes a rift of flameproof enclosure „d“. Protective hardened glass is resistant against mech. shock min. 7 J and is fixed in the flange; the connection is filled with polyurethane putty. The mobile steel hinge is fixed to the flange and enables to hang up the flange during mounting and dismounting. Steel parts are galva-nized and chromated. Max. section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases (4-core cable). Luminaire is equipped with 2 inner and 1 outer earthing clamp for conductive connection. Luminaire is designed as through-way one, when used as the end piece there is necessary to substitute one cable gland with blinding screw V-Ex or to blind one unused cable gland with blinding plug HSK-V-Ex. The blinding parts can be delivered on order optionally. Versions K are equipped with protective guard from steel wire. Packing carton is filled with sealing polyurethane foam Instapak. luminous sources: EcoClasik 140W E27, CLAS 200W E27, DULUX D26 W G24d-3, Bulb100W/220 E27, NAV-E 110 W E27, HQL125 W E27, NAV-E 50/l 50 W E27, HQL 80 W E27, Master PL E 23 W E27 and next. Carton 410 cm x 240 cm x 240cm , Weight 10 kg/pc
Ii 2g ex de iic t6 gb Ii 2d ex t iiic t 60 °c db Luminaire consists of body, basic plate and Flange with protective glass. Body and flange are made of alsi alloy Treated with polyester powder paint. Luminaire can be suspended By the help of steel pendant with eye o 18 mm. The connecting area (increased safety „e“) is placed on the side of the body and equipped With connecting clamps and 2 cable glands hsk-k-ex m25x1.5 for cables O 9-16 mm. Area is enclosed with cover and sealed with silicon. There is Aluminium basic plate with electro-module mounted inside the Luminaire. Electro-module consists of 20 x led cree xp-g (luminous Flux 4000 lm, lumen per watt 88 lm/w, colour temperature 3700-5000, Colour rendering index ~80, guaranteed life-time min. 50.000 hrs.) and Cooling unit. Input of the luminaire is adjustable (45w/22, 5w) by changing Output current of the led driver 700ma/350ma. Flange with protective Glass is screwed in the body and locked with securing screw; thread Shapes a rift of flameproof enclosure „d“. Protective hardened glass is Resistant against mech. Shock min. 7 j and is fixed in the flange; the connection Is filled with polyurethane putty. The mobile steel hinge is fixed to The flange and enables to hang up the flange during mounting and dismounting. Steel parts are galva-nized and chromated. Max. Section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases (4-core cable). Luminaire is equipped with 2 inner and 1 outer earthing clamp for conductive connection. Luminaire is designed as through-way one, when used as the end piece there is necessary to substitute one cable gland with blinding screw v-ex or to blind one unused cable gland with blinding plug hsk-v-ex. The blinding parts can be delivered on order optionally. Versions k are equipped with protective guard from steel wire. Packing carton is filled with sealing polyurethane foam instapak. Carton 410 cm x 240 cm x 240cm , Weight 10 kg/pc
150W. 4M.SAKA Series Led Street Led Luminaire Rated Voltage : 100-240 VAC & 50/60Hz Power factor: 0,95 Electrical Efficiency: 90% Optical Efficiency: 90% Protection Class: IP66 Led Type and Led Life: High Power Osram LED, Led Life (50000) hours. Color temperature: 3000-6500K CRI %70, FWHM: 140x60 Asymetrical Road Optics Design Earth Index: Class I (Must be earthed) Impact Resistance: IK 09 Lighting Housing: Aluminium Injection Body and Aluminium Extrusion Heat Sink Optical Structure and Driver housing is seperate, Luminaire Polyester Baked Paint 200C-RAL 9006 Refractor: IP 66 LENS Moduls Efficiency; 110 - 130 lm/W Electric Protection: Class I Electrical Protection Sites: Over Current Over Voltage, Short Circuit, Termal - Breaker Protection. Optical Lens: Bayer macrolon 2807 Optic Grade PC, 12/80/120/140x60 PC Lens Optical Structure: Road Optics - 12 LEDs / Per Module Standard: TSE 8700 EN 60598-2-3 ISO 9001, ISO 14001, OHSAS 18001, CE Certification: Turkish Standard Institution ( Accredited Internationally ) Waight: 7kg. Dimensions: 279x591x128mm. Connection Components: All bolts, nuts, fittings are stainless steel,Inox. Operation Temperatures: -30 / +60 Operation Humidity: 10% - 90% Modular design: When a modul breakdown other moduls with led going on to Works. Bracket Mounting Dia.: 43-60 mm Application Areas: Road and Street Lighting
LED Wall Pack Full Cutoff Outdoor luminaire Exterior Lighting- (Emitting Color: Daylight 5000K, Wattage: 70W) Emitting Color: Warm White 5000K, Wattage: 70W.It’s an architectural, full cutoff wallpack that is ideal for parking areas, entrances, walkways, underpasses, loading docks, and recreation areas.Fireflier LED wallpack light is designed to replace tradtional HID wallpacks. This product uses approximately 65% less energy than conventional wallpacks. It has the look and feel of a traditional wallpack fixture.Cutoff Led Wall Pack Light Warranty:5 years Specifications: Input Voltage AC100-277V Power 70W 5% Beam Angle 120 LED Luminous Efficiency >120lm/w Luminous Flux 8400lm 5% ( Tj=70 C,Ta=25 C) Lamp’s Efficiency: ( %) >95 % Color Rendering Index: (CRI) Ra>75 LED Emitter Life: 50,000 hours Replacement CFL :75W-400W Install Type:Wall mounted Protection level: IP65 Body material: Aluminum Power source: AC Diffuser: Polycarbonate Light source: LED 2 pack/ lot Certificates: CUL/UL Listed
Energy saving lamps 1) voltage: 220v, 50hz; 110v, 60hz. 2) power: 5w, 7w, 9w, 11w, 13w, 200w, 250w, 285w 3) lamp base: e14, e27, b22, e39, e40 4) color temperature: 2700k, 3500k, 4200k, 6400k 4) life span: 8000hrs It can replace the traditional outdoor lighting, such as mercury lamp, sodium lamp, metal halogen lamp. Not only to Improve the lighting environment well, but also to save energy and maintain cost. High power factor, no effect to Main voltage. Matched with electronicballast, ficker free, noise free, instant start. Pbt materials, high shining efficiency, over 8000 hours service life and can save electricity, be suitablefor outdoor lighting and indoor lighting. Applications : factory, square, shopping, center, front yard, station, public areas, hotels and marketplace.
More than 70% energy saving 4 x 6 LED module design, convenient for maintenance Uses Original American Cree or Philips Lumileds Universal input voltage: 85 to 264V AC, 277V Light control and time-phase dimming, saving further energy High-quality power supply, reliable and stable With automatic reduce current against overheating temperature With unique optical design and rectangular beam, suitable for roadway illumination. Specifications: Input voltage: 85 to 265V AC/36V DC Frequency: 47 to 63Hz Power factor: >0.95 THD: less than 15% LED source: Cree 72 x 2W LED power: 144W Luminous efficiency: >80lm/W Initial luminous flux: >11,520lm Constant luminous flux: >10,368lm Luminaire efficiency: >80% System resistance: 0.16/W Operating temperature: -30 to 50¡ãC Working humidity: 10 to 90% RH Warm white: 3,000 to 5,000K Neutral or cold white: 5,000 to 7,000K CRI: >75Ra Light distribution curve: rectangular optical spot Effective illuminating area: (H) 8m, 30 x 10m, (H) 12m, 42 x 16m Illuminance standard: (CJJ45-2006) Chinese urban roadway lighting standard Configuration: integral die-cast aluminum alloy housing with heat sink Diffuser: anti-UV tempered glass Manufacturing process: patent heat extraction board technology IP rate: IP65 Useful lifespan: >50,000 hours Wind resistance index: 12 Optional interface: digital dimmer interface (0 to 10V analog or DM x 512) Installation way: horizontal or longitudinal arm installation Electrical class: class I Dimensions: 766 x 349 x 79mm Applications: Ideal for street lighting on urban streets, gymnasiums, sidewalks, residential areas, industrial parks, squares, parks, schools and gardens.
