Mowell Professional Series Finger Tip Pulse Oximeter With Audio Visual Alarm and Respiratory Rate Specifications: Easy and simple operation 6 display modes, display SPO2, PR Low power consumption. Audible and visual alarms Automatically power off design 2AAA alkaline batteries This item is intended to give a moderate yet exact route for spot-checking blood oxygen immersion levels and heartbeat rate. All you need is a couple of moments and you can check these levels whenever, anyplace. Presently estimating your heartbeat rate and oxygen levels in the body turns out to be simple. All you need is a couple of moments and you can check these levels whenever, anyplace.
Specifications This Pulse Oximeter adopts Photoelectric Oxyhemoglobin Inspection Technology integrated with Capacity Pulse Scanning & Recording Technology, which can be used to measure human oxygen saturation and pulse rate through finger. The device is suitable for use in family, hospital, oxygen bar, community healthcare and physical care in sports, etc. (It can be used before or after exercise, but not recommended to use during exercising) Function Display of Sp02 value Display of pulse rate value and bar graph Display of Pl value (optional) Display of pulse waveform Battery power indication (optional) Low-voltage indication: the low power indication symbol appears when the voltage is too low to work Auto Power On Auto standby The display mode can be changed (optional) Adjustable screen brightness (optional) PR sound prompt (optional) Sound prompt (optional) Automatic direction-changing function (optional) Product Name - Portable Smart Finger Pulse Oximeter Model - CMS50-PRO Shell Color - Green Material - Plastic
Pulse Oximeter Oxyo is a Color monitor with 6 display modes, and 4 levels of brightness control available on this device. The SPO2 wave can be displayed in 2 ways according to user`s needs. Automatically power off after 4 seconds when finger out Color OLED monitor, 6 different display modes 4 level brightness. Pulse histogram and 2 kinds Spo2 wave display Easy to use & high accuracy and repetition Small in size, and easy to carry Low voltage alarm display Auto power-off after 4 seconds without signal Light weight of 55g, batteries included Runs on standard AAA batteries and continuous working time is 30 hours
Meditech FOs3+ is a Full Color high-clearance TFT monitor with 4 display modes and the brightness can be adjustable. Alarm sets for low voltage, abnormal SPO2 and PR. It will be automatically power off without signal. Inner flash memory sets for more than 30 hours data storage. Advanced software for sleep study and monitoring. Full Color monitor, (Pixels: 160*128, 256K color) 1.3" Built-in memory stores up to 24 hours of downloadable data (USB cable included). 4 different display modes Adjustable brightness settings. Built-in, switchable alarms for SpO2 and pulse rate. Pulse histogram and SpO2 wave display USB interface ensures convey of SpO2 data, (Wireless option) Easy to use & high accuracy Small in size, and easy to carry and Light weight of 45g, batteries included Battery voltage indication: color graph Auto power-off after 4 seconds without signal 3.7V Rechargeable Lithium Polymer Battery (Charger: USB and AC charger) Synchronous display on the oximeter and computer Inner flash memory for more than 30 hours data storage Advanced software for sleep study and monitoring Power consumption: less than 20mA (wireless and alarm not work).
This fingertip pulse oximeter is compact and light in weight, easy to use with only one-key operation. The internal alarm will function while low voltage. Automatically power off after 8 seconds when finger out. The continuous working time can be 39 hours. LED monitor for extended battery life SpO2 and pulse monitoring, and histogram of pulse display Easy to use with one-key operation Small in size, and easy to carry Low voltage alarm display Auto power-off after 8 seconds without signal Light weight of 50g, batteries included Runs on standard AAA batteries and continuous working time is 39 hours Display Format: LED SPO2:35-99% in two-digit 7-segment digital Pulse Ratio:30-240BPM in 3-digit 7-segment digital; Pulse Wave: 6-segment barograph; Battery Voltage Low Indication: LED signals Dimension:58(L) í- 30(W) í- 36(H) Weight:55g (including batteries) Power Requirements: 2 AAA size 1.5V Alkaline Batteries Power Consumption: less than 40mA. Resolution: í+1% for SPO2 and í+1 BPM for Pulse Ratio. Measurement Accuracy: í+2% in stage of 70%-99% SPO2 and meaningless when stage being smaller than 70%. í+2 BPM for Pulse Ratio. Measurement Performance in Weak Filling Condition: Oxy haemoglobin and pulse value can be shown correctly when pulse-filling ratio is 0.5%.
OxyS is a newly launched OLED fingertip pulse oximeter with 4 direction display modes, pulse histogram and 2kinds wave display, Alarm setting is available, it beeps when finger out, And auto power-off after 4 seconds without signal, well-designed appearance ,small in size and easy to use. Color OLED fingertip pulse oximeter, adopts latest technology, combines high quality with fashionable elements ensures well-designed appearance and steady function. 4 different display modes Pulse histogram and 2 kinds Spo2 wave display Alarm setting adjustable Beeps when finger out, Auto power-off after 4 seconds without signal Soft inside rubber design ensures a comfortable feeling when put finger in the monitor Easy to use & high accuracy and repetition Small in size, and easy to carry Low voltage alarm display Light weight of 55g, batteries included Runs on standard AAA batteries and continuous working time is 30 hours USB interface ensures convey of SpO2 data
Digital OLED display Finger insertion slot Measurement of oxygen saturation (SpO2) levels Heart rate (pulse) measurement Perfusion index (PI) display Portable and compact design Battery-powered (usually with AAA batteries) Auto-shutoff feature for power conservation
Product Description Finger Tip Pulse Oximeter with FDA and CE Certificates. As we have different specifications, price varies. Buyers can select Oximeter with CE and FDA certificates or Models that have onlly CE certificates Price of product ( USD price or FOB price) : 5USD ~ 15USD depending on the order quantity and Country of Origin Product origin : China, Taiwan Key Specifications/Special Features : Each unit packed seperately. 200 units per carton Minimum Order Size and Packaging details : 500pcs
Fresh and elegant pattern; Four-way OLED display of 0.95 inches; Good anti-wrestling character, Still working properly even after dropping from the high place of 1.2m; Thin and light body with 24 mm thick and 36 g weight; Blue tooth for APPFinger-tip pulse oximeter Fresh and elegant pattern; Four-way OLED display of 0.95 inches; Good anti-wrestling character, Still working properly even after dropping from the high place of 1.2m; Thin and light body with 24 mm thick and 36 g weight; Blue tooth for APP
Product name Pulse Oximeter Features 1.Display mode: LED display2.SPO2 measuring range:35%-100%3.Pulse rate measuring range:30bpm-240bpm4.Pulse waveform display: bargraph display5.Low battery indication: LED display6.Power supply Requirement: 1.5V(AAAsize) Alkaline Batteries�?2;7.Working current:?¤25mA8.Resolution: SPO2 : 1% Pulse Rate: 1bpm9.Accuracy: SPO2 :70%to100%±2digits,below70%unspecified Pulse rate:±2bpm or±2%(select larger)10.Measurement at Low Perfusion: The v of SPO2 and pulse rate can be displayed properly when pulse saturation is at 0.4%.11.Accuracy of SPO2:±4%12.Accuracy of Pulse Ratio.±2BPM or ±2% (Select Larger)13.Resistance to surrounding light:Deviation is smaller than ±1% between value of Oxyhemoglobin measured in natural lighting indoor condition and present lighting sources and that measured in dark room.14.Automatic shutdown function:The device will power off automatically within 5 seconds when there is no finger in the device.  Size  58*30*30mm Package 1pc/ Color box; 100pcs/Ctn; 44*28*20cm; 5.5kg
