Fvo Corp Limited

Heavy Melting Steel (HMS): Heavy melting steel is a designation for recyclable steel. It is categorised into two major categories: HMS 1 and HMS 2. The difference between the two is HMS 1 does not contain galvanized and cast iron, whereas HMS 2 does. Because both grades guarantee a minimum piece thickness â?? at least 1/4inch (6.3mm) for HMS 1, and 1/8 in for HMS 2 â?? consignments have a high density. The typical constituents are plates, truck parts, structural items, large machinery parts, automatic parts, pipes, post consumer steel goods. Quality Heavy metal ,Iron Scrap/ Metal scrap HMS 1 and HMS 2 scrap steel for sale

SPECIFICATIONS: the following Percentage Points: Chemical Composition Carbon - 0.54 to 0.82% Phosphorus - 0.035% max Manganese - 0.60 to 1.05% As. - 0,01max of Mass share Silicone - 0.18 to 0.40% Sulphur - 0.035% max Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75 The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m) Used Rails shall be considered free of alloys when the residual alloying elements do not exceed Cut to 1.5 meter length (standard) 1. Technical terms: USED RAIL R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.

R50- R65 - IRSI CODES; The chemical composition is the standard for R-50 R-65 Tee rails original weigh 50 pounds per yard or heavier,6 meters long and over. Material to be suitable for rerolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails, rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from end of the piece of rail. Free from Fluff, Nonferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings any organic waste any other harmful substances. Dirt, dust, rust fluff and other impurities not allowed over 05 %. The rails are to be neatly bundled and secured with iron wire or straps, provided with adequate lifting hooks. Individual bundles not to exceed 5 MTW. Used Rails R50 - R65 Chemical Composition Used Rails; C: 0, 54 - 0,82 Si: 0,18-0,40 Mn: 0, 60-1, 05 S: 0.04 max P: 0,035 max As.: 0, 01 max of Mass share Norms: R-50 GOST7173-75 and R-65 GOST-8165-75 The scrap consists of R-50 (51, 67 kg/m) R-65 (64,72 kg/m) Used Rail ISRI 27-29 ISRI-CODES; (27) Rail, Steel No. 1. Standard section tee rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch, and guard rails, or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail. (28A) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 18 inches long and under. (28B) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 2 feet long and under. (28C) Rail, Steel No. 2 Cropped Rail En ds. Standard sec t ion, original weight 50 pounds per yard and over, 3 feet long and under. (29) Rail, St eel No. 3.Standard section tee, girder, and/or guard rails, to be free from frog and switch rails not cut apart, and contain no manganese, cast, welds, or attachments of any kind except angle bars. Free from concrete, dirty and foreign material of any kind. The rails can be cut to the length the buyer wants

product origin : Middle East

GerardJOSEPH llc is an American company specializing in international supply of Consumers goods. We are a family business that is delivering the highest quality of consumer goods to buyers all over the world. We own shares of companies through the USA that do the production for us. High quality of products are guaranteed thanks to careful, detailed and research. Thanks to the policy followed by the company, we are conceived in the market as a reliable, honest and business like partner, the one that guarantees the highest standard of products. ISRI-CODES: (27) Rail, steel No.1 â?? Standard section T rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail. (28a) Rail, steel No.2 â?? Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 18 inches long and under. (28b) Rail, steel No.2 â?? Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 2 feet long and under. (28c) Rail, steel No.2 â?? Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 3 feet long and under. (29) Rail, steel No.3 â?? Standard section T, girder and/or guard rails, to be free from frog and switch rails not cut apart and contain no manganese, casts, welds or attachments of any kind except angle bars. Free from concrete, dirt and foreign material of any kind. We are trading in the finest quality Metal Scrap/ Aluminum Scrap, which are recycled for producing pure copper products and equipment.

We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities. We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa. Our products are procured from authorized vendors and are in total compliance with set industry norms. On behalf of the Management of Alpha Metal & Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies, represents and warrants to inform you that we are ready, willing and able to supply under the penalty of perjury, the following commodity with its specifications mentioned below. Product Name : Rail Scrap (R50, R65 & HMS) Material : Iron Metal Scrap Application : Melting/Industrial Use Quantity : Agreed shipment/Bulky 50,000 Metric Tonnes Current location : Kenya Country of Origin: Colonial Price :$195 Per Tonne (Negotiable) Contract : CIF Loading Port : Mombasa Delivery : Immediately contract signed by both parties Port Destination : TBA Payment : By TT within 48 hours after delivery and final analysis at the final destination port CHEMICAL COMPOSITION: SCRAP/RAILROAD FERROUS SCRAP (R50/R65) R50 GOST 7173-75 : Weight 51.67 KG/Meter R65 GOST 8165-75 : Weight 64.72 KG/Meter C : 0.60 -0.82% Mn : 0.75 1.05% Si : 0.13 0.28% P : Max 0.035% S : Max 0.045% Ar : Max 0.051% PROCEDURE: 1. Seller issues the FCO 2. The buyer physically inspects the goods in Kenya 3. After client�¯�¿�½?�?�¢??s satisfaction, buyer and seller enter into a contract according to their own agreement. 4. Upon signing of the contract, the buyer will cater for the goods insurance, logistics and cutting charges summing to at least 10% of the whole contract value. 5. Note that the above charges are deductible from the final invoice value and the remaining balance of 90% is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyer�¯�¿�½?�?�¢??s final destination port. i.e. (Terms are Negotiable)' 6. After loading, the seller/representative will travel together with the buyer to assist and witness discharge/offloading and to control the wire transfer of the final payment to be made to seller�¯�¿�½?�?�¢??s nominated bank account within 48 hours after receipt of the final assay report from buyer�¯�¿�½?�?�¢??s inspection. 7. In future quantities, seller shall notify the buyer of availability and the above procedure will be repeated. DOCUMENTATION: - Commercial Invoice, - Insurance, - Certificate of Origin, - Export permit/Certificate, - Ownership certificate, - Customs Clearance Certificate (Taxes) - Packing list - Bill of Lading

We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities. We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa. Our products are procured from authorized vendors and are in total compliance with set industry norms. On behalf of the Management of Alpha Metal & Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies, represents and warrants to inform you that we are ready, willing and able to supply under the penalty of perjury, the following commodity with its specifications mentioned below. Product Name : Rail Scrap (R50, R65 & HMS) Material : Iron Metal Scrap Application : Melting/Industrial Use Quantity : Agreed shipment/Bulky 50,000 Metric Tonnes Current location : Kenya Country of Origin: Colonial Price :$195 Per Tonne (Negotiable) Contract : CIF Loading Port : Mombasa Delivery : Immediately contract signed by both parties Port Destination : TBA Payment : By TT within 48 hours after delivery and final analysis at the final destination port CHEMICAL COMPOSITION: SCRAP/RAILROAD FERROUS SCRAP (R50/R65) R50 GOST 7173-75 : Weight 51.67 KG/Meter R65 GOST 8165-75 : Weight 64.72 KG/Meter C : 0.60 -0.82% Mn : 0.75 1.05% Si : 0.13 0.28% P : Max 0.035% S : Max 0.045% Ar : Max 0.051% PROCEDURE: 1. Seller issues the FCO 2. The buyer physically inspects the goods in Kenya 3. After client�?�¢??s satisfaction, buyer and seller enter into a contract according to their own agreement. 4. Upon signing of the contract, the buyer will cater for the goods insurance, logistics and cutting charges summing to at least 10% of the whole contract value. 5. Note that the above charges are deductible from the final invoice value and the remaining balance of 90% is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyer�?�¢??s final destination port. i.e. (Terms are Negotiable)' 6. After loading, the seller/representative will travel together with the buyer to assist and witness discharge/offloading and to control the wire transfer of the final payment to be made to seller�?�¢??s nominated bank account within 48 hours after receipt of the final assay report from buyer�?�¢??s inspection. 7. In future quantities, seller shall notify the buyer of availability and the above procedure will be repeated. DOCUMENTATION: - Commercial Invoice, - Insurance, - Certificate of Origin, - Export permit/Certificate, - Ownership certificate, - Customs Clearance Certificate (Taxes) - Packing list - Bill of Lading

We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities. We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa. Our products are procured from authorized vendors and are in total compliance with set industry norms. On behalf of the Management of Alpha Metal & Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies, represents and warrants to inform you that we are ready, willing and able to supply under the penalty of perjury, the following commodity with its specifications mentioned below. Product Name : Rail Scrap (R50, R65 & HMS) Material : Iron Metal Scrap Application : Melting/Industrial Use Quantity : Agreed shipment/Bulky 50,000 Metric Tonnes Current location : Kenya Country of Origin: Colonial Price :$195 Per Tonne (Negotiable) Contract : CIF Loading Port : Mombasa Delivery : Immediately contract signed by both parties Port Destination : TBA Payment : By TT within 48 hours after delivery and final analysis at the final destination port CHEMICAL COMPOSITION: SCRAP/RAILROAD FERROUS SCRAP (R50/R65) R50 GOST 7173-75 : Weight 51.67 KG/Meter R65 GOST 8165-75 : Weight 64.72 KG/Meter C : 0.60 -0.82% Mn : 0.75 1.05% Si : 0.13 0.28% P : Max 0.035% S : Max 0.045% Ar : Max 0.051% PROCEDURE: 1. Seller issues the FCO 2. The buyer physically inspects the goods in Kenya 3. After client�?�¢??s satisfaction, buyer and seller enter into a contract according to their own agreement. 4. Upon signing of the contract, the buyer will cater for the goods insurance, logistics and cutting charges summing to at least 10% of the whole contract value. 5. Note that the above charges are deductible from the final invoice value and the remaining balance of 90% is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyer�?�¢??s final destination port. i.e. (Terms are Negotiable)' 6. After loading, the seller/representative will travel together with the buyer to assist and witness discharge/offloading and to control the wire transfer of the final payment to be made to seller�?�¢??s nominated bank account within 48 hours after receipt of the final assay report from buyer�?�¢??s inspection. 7. In future quantities, seller shall notify the buyer of availability and the above procedure will be repeated. DOCUMENTATION: - Commercial Invoice, - Insurance, - Certificate of Origin, - Export permit/Certificate, - Ownership certificate, - Customs Clearance Certificate (Taxes) - Packing list - Bill of Lading