Jayfluoride Pvt Limited

We Caprice International, is the leading exporter of the most colorful and useful mineral calcium fluoride (fluorspar), probably customers demand for high grade calcium fluoride with competent prices, they should not worry because we offer them all grades calcium fluoride with very competent prices, our company has leased several mines of Calcium fluoride (fluorspar) and has started mining operation over there and getting the quality material. Our fluoride has various colors, included blue, black, transparent, white, and gray.

We offer our material in grade wise which is mentioned under
Caf2 60% to 70%
Caf2 71% to 78%
Caf2 79% to 80%


Sizing : 10mm to 50mm.

Packing
Loose in container,
50Kg PP Bags,
01 Tons Jumbo Bags
or as per our valued customer demand.

PTFE Graphite Packing
The packing is woven of graphite PTFE yarn twisted through a mixture of PTFE dispersion resins and fine graphite powder plus moderate amount of heat-resistant lubricant.

PTFE Graphite Packing with oil
Packing: Packing made of 100% g PTFE yarns, and re-impregnated with a silicone lubricant with density about 1.6g/cm3.

Applications
For use in pumps, valves, reciprocating and rotating shafts, mixers and agitators.
Especially designed for services involving surface speeds and temperature higher than those normally specified for pure PTFE packings.
Can be safely used in all chemical pump applications with the exception of molten alkali metals, fluoride, fuming nitric acid and other strong oxidizing agents.
It is also against water, steam, petroleum derivatives, vegetable oil and solvents.

Fluorspar, also known as fluorite, is a mineral composed of calcium fluoride (CaF2). It is a widely occurring mineral that is found in various types of rock formations. Fluorspar has a wide range of uses, including in the production of aluminum, steel, hydrofluoric acid, and as a flux in the production of glass, ceramics, and enamels. It is also used as a source of fluorine in the pharmaceutical and chemical industries, and as a gemstone. Fluorspar is known for its unique fluorescence, which is caused by the presence of certain impurities in the mineral.

Following the extraction of fluorspar from mines located in Pakistan, our highly skilled team diligently assesses and classifies the fluorspar before initiating the processing stage for our valued customers. Our fluorspar products encompass a broad spectrum of grades, ranging from 30% to 96%, catering to the requirements of the acid, cement, and steel industries. Additionally, we offer fluorspar in various size specifications, including 0-10mm, 3-10mm, and 10-80mm, which are already being successfully distributed to diverse markets, including China, Turkey, Korea, Japan, and Europe.

With a substantial monthly production capacity of 10,000 tons, we stand as a dependable and robust source for meeting industrial demands. In parallel to our expertise in fluorspar extraction and processing, Bare Syndicate boasts extensive proficiency in logistics and international trade. This comprehensive skill set enables us to provide our customers with a seamless, all-inclusive solution for their supply management needs

Description:
MSQ-50 is a multi-functions silicone emulsion. Generally it applied as a water repellent for fiber, leather, paper, limestone, etc .Different to fluoride-chemical MSQ-50 matches the (Rohs & REACH) standard. Texture after water-repellent treatment had 80% efficiency (AATCC-22-52 test), and also have softened and silk felling.

Benefits:
1. Excellent stable emulsion, after event dilute to 2% concentration.
2. Long time working solution, up to 24 hours.
3. Suitable to all kind of textile (Cotton, polyester, Nylon)
4. AATCC-22-52 test could match 80% efficiency after 30 circle standard wash.
5. Emulsions may be applied in low concentrations by spraying, dipping, brushing or wiping.

Specification:
MSQ-50A MSQ50-B
Appearance --- Milk white Appearance --- Milk white
Activity % --- 50 +/- 2 PH/25â?? --- 5.5 to 6.5
PH/25â?? --- 4.5 to 6.5

Operation procedure:
1. Standard concentration 1.5 to 3.5g MSQ-50A/100g H2O by weight.
2. For special texture, could be used higher dosage MSQ-50A 5g/100H2O.
3. Working solution (H2O : MSQ-50A : MSQ-50B be 96.7g : 3.0g : 0.3g)
4. Working solution could be used for 24hr under 35â?? Texture dry under 80 to 110â??,
then curing on 120 to 180â?? x 2 to 10 min.

Precaution:
1. MSQ-50B cannot be added to MSQ-50A directly.
2. If MSQ-50B is added to MSQ-50A, the solution will gel and evolutes Hydrogen gas.

Storage condition:
For 6 months under 25â??

Product description, Product introduction:
Fluorite powder is White or light yellow, main ingredient is CaF2, among which fluoride is 48.67% and calcium is 51.33%.Fluorite is of cubic system, it has glass gloss, the hardness is 4 and fusibility is between 1270�?? and 1350 �??. The maily function of Fluorite is to improve the friction coefficient,it has good adsorption and acid etc. Fluorite is suitable for the disc brake pads,drum brake pads and clutch. According to the performance, the reference usage of Fluorite is generally from 2% to 8%.

The character of Fluorite:
Fluorite is named because it can emit fluorescence when heated in the dark. The color of fluorite ore are primary, green and purple,and the color is gorgeous dense. The non-weathering fluorite can be as jade material or ornamental stones. Fluorite is used as a flux in the modern industry especially in steel, aluminium, cement and glass production, it is one of essential raw materials. Fluorite is an important raw material in friction material grinding wheel production, Many industrial all have requirements of fluorite. China began to use fluorite carve handicraft even since the Neolithic Age. Because the fluorite hardness is lower than the crystal it is called soft water amethyst. These years, some people called purple fluorite as purple jade.

property:
density: 3.18/cm3
F content: 48 % min
screen analysis: +S 200

Fluorspar (CaF2) is the mineral form of calcium fluoride, also called fluorite. Pure fluorite is transparent, both in visible and ultraviolet light, but impurities usually make it a colorful mineral and the stone has ornamental and lapidary uses. Industrially, fluorite is used as a flux for smelting, and in the production of certain glasses and enamels.

We supply metallurgical fluorspar lump and fluorspar ganular from 60%-98%,

The size of fluorspar ganular can meet all your requirement and can provide certificates.

After you make an order, the cargo can be delivered as soon as possible.