A1, Jp54 Aviation Kerosene
JP54 / JET A1 : RUSSIAN ORIGIN First lift : 1,000,000 bbls - 2,000,000 bbls Contract QTY : up to 5,000,000 blls Price : NWE PLATTS MINUS $6/$8 FOB : ROTTERDAM / FUJAIRAH PORT/ HOUSTON COMMISSION : 50% SELLER SIDE CLOSED / 50% BUYER SIDE OPEN
Origin Russian
Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance. Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound. Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives. Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery. Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.
Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance. Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound. Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives. Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery. Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.
FOB Rotterdam PROCEDURE (TANK TO TANK) 1. Buyer submits ICPO, TSA and Company Registration Certificate. 2. Seller releases Commercial Invoice. 3. Buyer signs the CI and return to Seller. 4. Seller releases The following PPOP documents to the buyer secure channel: a. Refinery Commitment and Guarantee to Supply the product b. Statement of availability of the Product c. Tank Storage Receipt - TSR d. Product Passport 5. Upon receipt of the above PPOP documents, within 48 hours buyer present their Tank Storage Receipt - TSR as proof of storage availability. 6. Upon confirmation, seller sends Unconditional Dip Test Authorization (DTA) 7. Buyer conducts dip test in Sellers tanks and Lift the Product. 8. Buyer makes payment via MT103 or Wire transfer By MT103 for the total product available. 9. Buyer Lift the product and Seller pays all the intermediaries involved in the Transaction 10. Seller and Buyer proceed to sign contract for 12 month or more. FOB APPROVED PROCEDURE (TANK TAKE-OVER) 1. Buyer submits (ICPO) and Company Profile (CP). 2. Seller issues Commercial Invoice (CI). 3. Buyer signs the CI and returns to Seller 4. Seller issues The following PPOP documents to the buyerâ??s secure channel: a. Refinery Commitment and Guarantee to Supply the product b. Statement of availability of the Product c. Tank Storage Receipt - TSR d. Product Passport 5. Upon receipt of the above PPOP documents, within 48 hours Buyer proceed to contact the seller tank farm company and extend the tank for three (3) days. 6. Buyer conducts dip test in Seller's tanks and Lift the Product. 7. Buyer makes payment via MT103 for the total product injected into its tank as agreed and Seller issues to Buyer Title Transfer & Change of Ownership Certificate of the product. 8. Seller pays intermediaries involved within 48 hours after receipt and confirmation of the product payment. 9. Upon satisfaction by Buyer, both Buyer and Seller sign contract for month delivery with rolls and extension. If the procedures are suitable for you, please do not hesitate to contact us for further details. ICPO should be addressed to: End Seller via Gulliver Group Ltd.
Radixsarl operates in Lebanon. Currently, we are running Worldwide operations from the United Arab Emirates (UAE) in the field of oil and petroleum trading. With years of affluent industry expertise and experience, we take pride in providing an extensive range of Jet Fuels (A1, JP54) along with chemicals, dyes & solvents. Our JET FUEL is quality assured and comply with international industry standards. Buyers can expect superior grade pieces, reliability, and admirable specifications in 240 per air-cooled price, having no match. Our Jet Fuels (A1, JP54) are demanded by local as well as international clients owing to the quality and our reputable position in the market. Our professional enterprise boasts an annual production of Large air-cooled under a highly strict quality control system, making Radixsarl a reliable Manufacturer and Importer of Jet Fuels (A1, JP54). We are accepting orders for JET FUEL with a minimum order quantity of 500,000 Gallon. For utmost customer satisfaction, a high level of transparency and proper documentation is maintained on purchases. We deliver orders in 6-7 Business Days via FOB, DEQ. we collaborate with numerous local and international distributors. For payment, we entertain EUR, USD, and T/T, D/A.
Russian Aviation Kerosene Colonial Grade 54 (jet Fuel) Quantity 1, 000, 000 Bbl --- 5, 000, 000 Bbl price $25.00 Gross / $23.00 Net required serious buyers , no waster time
Jp A1 & Jp54 Russian Aviation Kerosene Colonial Grade 54 (jet Fuel) Quantity 1, 000, 000 Bbl --- 5, 000, 000 Bbl price $25.00 Gross / $23.00 Net FOB ROTTERDAM required serious buyers , no waster time
AVIATION KEROSENE COLONIAL GRADE JP54 / JAI Origin: Russian Federation Terms: FOB ROTTERDAM Quantity: JP54 1 Mil bbls Monthly x 12 Months JA1 1 Mil bbls Monthly x 12 Months FOB Price: Gross $40 USD / Net $34 USD per bbl (*Same Price for JP54 & JA1) Payment: SBLC/MT760, DLC/MT700, MT103/TT Inspection: SGS/CIQ Commission: $3 / $3
