Multisynth 20W40 is a superior quality multigrade oil blended with superior quality high Viscosity Index base oils and contains well balanced group of additives to provide high detergency, dispersancy and anti-oxidant characteristics. APPLICATION Recommended for both petrol and diesel engines that are naturally aspirated and light commercial vehicles under normal operating conditions. BENEFITS High Viscosity Index which keeps it free-flowing when cold and maintains high viscosity when hot. High detergency and dispersion properties offer improved engine cleanliness. Reduced friction and wear. Effective resistance to block sludge and deposit formation. Excellent resistance to oxidation and corrosion.
CPI-4628-68 is formulated with high quality synthetic polyalphaolefi n (PAO) basestock, combined with our patented seal swell technology. This lubricant features enhanced oxidation stability and a low pour point, allowing it to operate over a wide range of temperatures. The oil has low volatility, enabling decreased maintenance and significantly reduced lubricant consumption. Our patented seal swell technology minimized ammonia leaks due to poor elastomer performance. CPI-4628-68 is particularly suited for use in ammonia compressors with evaporator temps below -39C. Applications and Compressor Type Ammonia compressors Process gas rotary screw Process gas reciprocating compressors Features and Benefits Patented seal swell technology Minimize ammonia leaks Mineral oil compatible Easier change-over Oxidatively stable Longer system life Low carry-over Improves evaporator efficiency Corrosion protection Enhanced system reliability and reduced downtime Very low pour point Reduced efficiency loss and easier removal of the oil Low volatility Reduced maintenance, reduced top-up Test Procedure ASTM Method Typical Viscosity @ 40 C, cSt ASTM D445 59.1 Viscosity @ 100 C, cSt ASTM D445 9.1 Viscosity Index ASTM D2270 131 Density, g/mL, 20 C ASTM D4052 0.84 Pour Point ( C) ASTM D97 -54 Flash Point, C.O.C., ( C) ASTM D92 266 Fire Point, C.O.C., ( C) ASTM D92 282
CPI-1008-68 is formulated with high-quality hydrotreated mineral oil, combined with an excellent performance additive package that includes patented seal swell technology. This lubricant features enhanced oxidation stability and pour point depressant, allowing it to operate over a wide range of temperatures. The oil has low volatility, enabling decreased maintenance and signifi cantly reduced lubricant consumption. Our patented seal swell technology minimizes leaks due to poor elastomer performance. CPI-1008-68 is particularly suited for use in ammonia compressors with evaporator temps greater than -39C. Applications and Compressor Type Ammonia compressors Process gas rotary screw Process gas reciprocating compressors Features and Benefits Patented seal swell technology Minimize ammonia system leaks Oxidatively stable Longer system life Low carry-over Improves evaporator efficiency Corrosion protection Enhanced system reliability and reduced down-time Low pour point Easier removal of the oil Low volatility Reduced maintenance, reduced top-up Test Procedure ASTM Method Typical Viscosity @ 40C, cSt ASTM D445 68 Viscosity @ 100C, cSt ASTM D445 8.9 Viscosity Index ASTM D2270 111 Density, g/mL, 20C ASTM D4052 0.88 Pour Point (C) ASTM D97 -39 Flash Point, C.O.C., (C) ASTM D92 240 Fire Point, C.O.C., (C) ASTM D92 268
Oil Lubricating the gears of industry and innovation. Our high-quality oil is engineered to keep machinery running smoothly and efficiently. From automotive engines to industrial equipment, our oil reduces friction, dissipates heat, and protects against wear and tear, ensuring optimal performance and longevity. With a blend crafted for precision and reliability, trust our oil to keep your engines running at their best, powering progress and innovation.
Industrial lubricants are critical for efficiency of heavy machinery in industries, delivering maximum performance and productivity and reducing wear of machinery. Improper lubrication can result in failure of machinery or equipment downtime. With TriboLubes extensive research and technology based manufacturing, our industrial oils deliver benefits of sustainability and environmental friendliness alongside industrial efficiency benefits
DESCRIPTION KORYO SN 15W-40 is synthetic base oil, designed for passenger cars that run on gasoline and LPG/CNG/LNG engines, fitted with recent gasoline engines with multi valve, turbocharged, with/without catalytic converter technology, it delivers superior engine protection, lowers friction, maximizes engine performance, Low viscosity reduced friction and fuel-efficiency, high fluidity ensures easy cold start at low temperature and maintains oil film resistant at extremely high operating temperature, it meets API SN requirements. PERFORMANCE : API SN PACKAGE : 1L, 4L, 6L, 20L, 200L Plastic Can/Steel Tin Can
Product characteristics: 1.Superlubrication Lift engine power more than 12%! The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%. 2.The ultimate wear resistance Save fuel up to 15%! The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%. 3.Shock absorption and noise reduction Effectively reduce noise by more than 6%! The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced. 4.Deep repair Effectively repair engine wear, prolong engine life by 2 times! Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times. 5.Cleaning and energy saving Remove more than 85% of oil mud carbon, reduce the number of engine cleaning! The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost. 6.Extension period Extend the oil exchange cycle by more than double. Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice. 7.Green environmental protection CO (carbon monoxide) emissions decreased by 90% . The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.
Product characteristics: 1.Superlubrication Lift engine power more than 12%! The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%. 2.The ultimate wear resistance Save fuel up to 15%! The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%. 3.Shock absorption and noise reduction Effectively reduce noise by more than 6%! The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced. 4.Deep repair Effectively repair engine wear, prolong engine life by 2 times! Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times. 5.Cleaning and energy saving Remove more than 85% of oil mud carbon, reduce the number of engine cleaning! The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost. 6.Extension period Extend the oil exchange cycle by more than double. Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice. 7.Green environmental protection CO (carbon monoxide) emissions decreased by 90% . The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.
Product characteristics: 1.Superlubrication Lift engine power more than 12%! The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%. 2.The ultimate wear resistance Save fuel up to 15%! The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%. 3.Shock absorption and noise reduction Effectively reduce noise by more than 6%! The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced. 4.Deep repair Effectively repair engine wear, prolong engine life by 2 times! Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times. 5.Cleaning and energy saving Remove more than 85% of oil mud carbon, reduce the number of engine cleaning! The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost. 6.Extension period Extend the oil exchange cycle by more than double. Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice. 7.Green environmental protection CO (carbon monoxide) emissions decreased by 90% . The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.
