Yadav And Son's Trading Company

1/. Automatic vulcanizer with PLC controler Automatic vulcanizer for curing silicone or organic rubber moulds. Features: 1. PLC Automatic intelligent vulcanizing control. 2. Touch-screen control panel. 3. Automatic pressure regulation. 4. Digital temperature controller. 5. Curing cycle timer. 6. Automatic forced cooling 7. Digital display pressure, temperature and time. 8. Maximum pressure protection 9. Hydraulic group with motor pump and oil pressure release valve. 10. Electro-valve controlled plate opening. 11. Environmental and energy saving insulation design to provide a better temperature uniformity and energy cost saving. Model APM12-I APM14-I APM16-I APM18-I APM20-I Mould diameter max 12 14 16 18 20 Mould thickness, max 150mm Heating 6KW 6KW 9.6KW 10.8KW 12KW Motor 1.5KW Pressure,max 32T 32T 50T 50T 50T 2/. Automatic vulcanizer Automatic vulcanizer for curing silicone or organic rubber moulds for centrifgal casting for bucket and accessories , jewelry Features: 1. Automatic control 2. Automatic pressure regulation. 2. Automatic temperature control 3. Curing cycle timer. 4. Automatic forced cooling 5. Digital display temperature and time. 6. Maximum pressure protection 7. Environmental and energy saving insulation design to provide a better temperature uniformity and 8. energy cost saving. Model APM12 APM14 APM16 APM18 APM20 Mould diameter max 12 14 16 18 20 Mould thickness, max 150mm Heating 6KW 6KW 9.6KW 10.8KW 12KW Motor 1.5KW Pressure,max 32T 32T 50T 50T 50T 3/. manual rubber vulcanizer press for centrifugal casting vulcanizer for curing rubber moulds for centrifugal casting. Features: 1. Automatic temperature control 2. Curing cycle timer. 3. Digital display temperature and time. 4. heating plates with good surfces assure perfect flatness Model MVP12 MVP14 MVP16 MVP18 MVP20 Mould diameter, max 12 14 16 18 20 Mould thickness, max 150mm Heating 4.0KW 6.0KW 9.6KW 10.8KW 12KW Pressure, max 32T 32T 50T 50T 50T

Properties white powder , inodorous , atoxic , soluble in water , insoluble in gasoline application it can be 50 : 50 blended with accelerator m or dm to eliminate the discoloration and blooming of m or dm in rubber compound , erpecially in white or light rubber compound Pe bag lined with pe film

CAS; 51988-14-8 Usage: CPE, CM Rubber Vulcanizing Agent Vulcanizing agent TDDS Appearance The finished product is light yellow powder. Packing: 25kg/cardboard drum Composition of thiadiazole thiadiazole ester derivatives Content (assy)%>96 Detail% > 99 (pass rate of 320 meshes) Melting Point (m, p)% 165-168 C Moisture (w, c) is less than 0.30 Ash (%) less than 0.30 DMF density 1.46 Physical properties: insoluble in methanol, ethanol, water, slightly soluble in acetone Foreign similar product brands: Rhenogran TDD in Germany; ACTOR-ECHO.A in USA Shelf life: 12 months sealed at room temperature Product description: TDDS is a vulcanizing crosslinker specially designed for halogenated synthetic rubber such as chlorinated polyethylene rubber (CM) and chlorohydrin rubber (ECO) chloroprene rubber (CR) chlorosulfonated polyethylene rubber (CSR). TDDS is a derivative of 2,5-dimercapto-1,3,4-thiadiazole ester. TDDS is a derivative of thiadiazole ester. It can be used as a new vulcanization crosslinker for halogenated polymers such as chlorinated polyethylene rubber (CPE), polyvinyl chloride (PVC) and chlorohydrin rubber (ECO), chlorosulfonated polyethylene rubber (CSM), chlorinated rubber, chlorobutadiene rubber (EVA). TDDS is especially suitable for vulcanization and crosslinking of CPE. It is a highly effective and high performance vulcanizing agent for chlorinated polyethylene with NC or BF. Advantages of TDD vulcanization system: 1. TDDS vulcanization system is suitable for any vulcanization methods, such as moulding, continuous vulcanization, tank type, microwave type, etc. The vulcanization process will not be oxidized by air. It is suitable for Moldless vulcanization in vulcanization tank with low vulcanization temperature. Also suitable for injection moulding can be vulcanized in vulcanizer. 2. The curing speed is fast and the positive curing time is short. 3. Safe operation, no pollution in the production process, no irritating odor, no frost, no scorch. 4. The physical properties of vulcanizates are as good as those of peroxide systems, and they are ageing-resistant. Excellent heat resistance, small compression permanent deformation, especially good tear resistance. 5. The product has good appearance, no frost spraying, no burning and no irritating odor. Product applications: 1. The recommended dosage is 2.0-2.5 TDDS and 1.5 BF (NC) for cable sheath and rubber products such as inner and outer rubber and conveyor belts. 2. A small amount of insoluble sulfur can be used in braided rubber pipes with copper-plated steel wires to improve their vulcanization and adhesion to steel wires. 3. Suitable for high temperature and rapid vulcanization, and also for steam tank type vulcanization: 4 kg/cm2 steam pressure (151 C) vulcanization tank. Suggestion of vulcanization time is 40 minutes.

We offer Vulcanized Scrap Rubber for tire and inner tubes compound processing. we might consider customized sourcing as well.

Superior in geographic position, qingdao xiangjie rubber machinery co., ltd. Is located in the west coast of qingdao, which is one of the fastest developing economic and technology development zone in china.It si one of the most famous rubber machinery manufacturers.We have been specializing in rubber machinery for more than 20 years. The company has passed iso9001:2008 quality system certification.Ce certification, france bv certification.

The equipment has the function of automatic control by pid controlling vulcanizing tank of curing temperature, curing pressure and curing time to guarantee the quality of tyre vulcanizing, such as temperature compensation, automatic alarm, automatic timing.Use temperature relay, to effectively control of temperature, error within 1.2℃.The adoptwing valve to control, the overpressure automatic exhaust.Time control with the time relay to set precise vulcanization time.With the functions of vacuum pump vacuuming. Vulcanizing tank gas tubes (hose) made of materials with high temperature and pressure resistance .The thickness of the steel plate, 10 mm, can take the pressure of 10 kg.Using packing seal, characterising the high temperature resistance, not easy to heat, ensure the seal well. Voltage: 380v/50hz Power(w): 55kw Dimension(l*w*h): 4300*2300*2300mm Weight: 3200kg Certification: iso After-sales service provided: engineers available to service machinery overseas Color: blue Working pressure: 0.8/mpa Standard rim diameter: 15''-22.5'' Dimension(l*w*h): 4300*2300*2300mm Weight: 3200kg

Product name: pre dispersed rubber vulcanization accelerator cbs - 80 (cz - 80) Producing area: liaoning panjin Chemical name: n - cyclohexy - 2 -benzothiazole sulfenamide Product application: it is an after-effect accelerator. It has high performance of scorching resistance and short curing time. It mainly used for tire, rubber tubes, shoes, tapes, tapes and cables. Packaging and shipping: 25 kg, polyethylene bag lined with carton. It should be stored in a dry, cool, ventilated place