Automobile diesel fuel (EN 590) Grade E (winter), recommended for use at ambient temperatures up to minus 15 C (limiting filterability temperature). Diesel fuel EN 590 (EN 590) Grade E is obtained from petroleum refined products and is intended for use as automotive fuel for diesel engines of cars and trucks. Diesel fuel meets the requirements of the international standard EN 590/2000 and is characterized by a low content of sulfur, aromatic hydrocarbons and a high cetane number, which leads to an overall reduction in sulfur oxide emissions, a decrease in the amount of particulate matter in exhaust gases and the formation of deposits in the fuel system of cars and heavy vehicles, reducing exhaust smoke and is the key to good starting properties of the fuel during cold start of the engine. The oil refining industry produces diesel fuel in accordance with GOST 305-82 of three grades: L - summer, used at ambient temperatures above 0 C; 3 - winter, used at temperatures up to -20 C (in this case, winter diesel fuel should have a stagnation
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.
Commodity: Diesel Gasoil EN590 10PPM ORIGIN: THE REPUBLIC OF KAZAKHSTAN QUANTITY: 100,000 MT FIRST TRIAL SHIPMENT & 300,000 MT X 12 MONTHS WITH ROLLOVERS & EXTENSION PRICE: $550.00USD GROSS/$530.00 USD NET PER MT. Delivery: Tank to Tank Origin: Kazakhstan Loading Port: Rotterdam/Houston/Fujairah Inspection: SGS Payment: MT 103 Swift Bank to Bank on Invoice FOB TTT PROCEDURE 1.The Buyer Issue an ICPO. Containing the seller's work procedures and Banking Details along with TSA (TANK STORAGE AGREEMENT), Buyer Certificate of incorporation, CompanyProfile (CP) and International Passport Copy of the CEO. 2.Seller issues ICC Warning Letter and Commercial Invoice (CI) of products in tank at port, buyer signs and returns the documents with acceptance and commitment letter stating to adhere to seller procedure. 3.The seller issues a copy of the SGS Report strictly JUST to the buyer's Tank farm Company only to verify the SGS Report. 4.after confirmation of successful verification of SGS Report only by Buyer's Tank Farm Company.The Buyer pays his Tank Company for 5 Days TSR and sends his TSR to the Seller. All Parties must sign NCNDA and IMFPA for endorsements. 5.The seller issues the following POP documents to the buyer; (a)SGS report for quality and quantity not older than 48 hours (b)Product Certificate of Origin (c)Product injection report (d)Tank storage receipt with full GPS coordinates (e)Unconditional dip test authorization letter (f)Authorization to sell and collect (i)Q&A 6.After verification of the documents, the injection will be commenced and after injection the buyer makes payment for the total value of the product injected into the tank via MT103-TT. 7.After receiving confirmation of Buyer Payment, the seller immediately transfer the title ownership to the buyer. 8.Seller sends payment of all intermediaries involved in the transaction 24 hours after receiving confirmation of Buyer Payment as per signed & sealed NCNDA/IMFPA which is notarized by Public Notary in Kazakhstan and then monthly remittance is continued as per terms and terms of the contract of sale and purchase agreement t between the buyer and seller.
Diesel is a light petroleum product, a complex mixture of hydrocarbons (with a carbon atom number of about 10-22), used as fuel for diesel engines. It is mainly composed of diesel fractions produced through processes such as crude oil distillation, catalytic cracking, thermal cracking, hydrocracking, and petroleum coking. It can also be produced through shale oil processing and coal liquefaction, and can be divided into two categories: light diesel (with a boiling point range of about 180-370 â??) and heavy diesel (with a boiling point range of about 350-410 â??). Widely used in large vehicles, railway locomotives, and ships. The most important use of diesel is for diesel engines in vehicles and ships. Compared with gasoline engines, diesel engines have higher thermal efficiency and lower fuel consumption. Diesel has low energy consumption, so some small cars and even high-performance cars have switched to diesel.
Greetings, we trust this message finds you well. We are reaching out to express our warmest regards and extend an invitation for potential collaboration. In order to better understand your requirements, we kindly request you to share the requested quantity for EN590 10PPM. This information will allow us to tailor our offer to meet your specific needs effectively. With authorized access to reputable refineries, we take pride in ensuring the delivery of high-quality products, providing exceptional service and buyer friendly procedures. Our commitment is to foster a mutually beneficial business relationship that goes beyond expectations. Looking forward to your prompt response and the opportunity to discuss further details. Origin : Kazakhstan / Russia
EN590 was introduced to coincide with the development of new emissions standards across the European Union. The overall goal has been to reduce the sulphur content of diesel fuel. Sulphur had been used as a lubricant in the fuel. Its role is taken by special additives in ULSD. Since 2007, diesel that conforms to EN590 has been referred to as Ultra Low Sulphur Diesel (ULSD) in the European Union. The phrase Ultra Low Sulphur Diesel is governed by different standards in other parts of the world. EN590 describes the physical properties that all automotive diesel fuel must meet if it is to be sold in the European Union, Croatia, Iceland, Norway and Switzerland. The EN 590 had been introduced along with the European emission standards. With each of its revisions the EN 590 had been adapted to lower the sulphur content of diesel fuel since 2007 this is called ultra low sulphur diesel as the former function of sulphur as a lubricant is absent (and needs to be replaced by additives). The quality of European diesel fuels is specified by the EN 590 standard. While these specifications not are mandatory, they are observed by all fuel suppliers in Europe. Automobile diesel en 590 is intended for application in diesel engines. Diesel motor fuel quality meets the requirements of European Standard EN 590. For operation in the conditions of a temperate climate following marks of fuel diesel automobile EN 590 are offered: Grade C limiting filterability temperature -5 C; Grade D limiting filterability temperature -10 C; Grade E limiting filterability temperature 15 C; Grade F limiting filterability temperature -20 C. The entire volume of produced diesel fuel quality meets the requirements for fuels for vehicles of Euro 4 and Euro 5. Low sulfur content in diesel EN 590 reduces emissions of sulfur oxides into the atmosphere, which is especially important for for inhabitants of big cities.
L/C ,DLC, SBLC payment is accepted, NO upfront, pre-payment. Minimum Order Quantity is 100k/mt if spot. We are one of the most precise on non-sanctioned supply due to strict requests of our clients. We are in direct colloboration with reputable sellers,resellers,retailers,manufacturers and also well known refineries within our portfolio. Both as buyer and seller according to the necessarities in our partnerships.
DIESEL EN590 10PPM,,, Dip and Pay as FOB as Ship To Ship only, from Benghazi, Libya, Only for RWA Buyers.. Price: $0.59 / Liter as Dip and Pay .. Quantity per Vessel is from 10,000 - 30,000 MT / Vessel... Procedures is very simple, easy and clear: ICPO --> Seller send CI to Buyer to sign ---> Buyer makes Block Fund in Dubai against CI ---> Dip test and Injection of product ---> Payment... Please contacting through RWA buyers only.
