Tma high speed mixer Tma high speed mixer is suitable for homogenized mixing of pvc, hdpe and ldpe polymers with other ingredients like, pigment powder, pigment paste and master-batch to make a proper homogenized mixture for further process
I Have Recycled Granules
PVC Profiles, windows , doors, roofs and flooring. All types of plastic raw materials ( polyvinyl chloride , polyethylene , polypropylene , polyethylene terephthalate and polystyrene )
We can provide you -PVC soft safety pipe scrap- PVC soft Cables scrap -PVC Window profile scrap in loose -PVC white window shutter in bales -Mix PVC scrap (ALL HARD) in bales -LDPE Clear film in bales 98/2 -HDPE Rolls -IC Trays scrap.
Plastic granules particles new and recycled regrind materials We offer new and recycled plastic granules of PVC, PC, ABS, HDPE, LDPE, LLDPE, PET bottle-grade chips and materials. Regenerated particle with different prices, mesh number, level grades and colors. As the price will fluctuate in different periods, you need to make an inquiry to buy.
Supplier: Plastic scrap (ldpe, pp, pvc, pet, pmma, hdpe, bopp, pe, ps, abs etc)., textile waste (cotton hosiery clips, cotton thread waste), denim, unbleached, selvedges rama string, rags for mattresses, wiping rags, licekrin dropings 100% cotton bales, card fly etc.) paper scrap
We Recycled / Reprocessed LDPE/HDPE/LLDPE Granules in a grade of extrugan,(Blowing and Molding) as per buyers Specific requirements for black, white and other colors.
Plastic Indsturial west products 500kg pur balls
HDPE: HDPE cable material Property Unit Typical Value Mass density g/cm 3 0.941-0.959 Melt flow Rate(190 centidegree /2.16kg) g/10min 1.0 Tensile yield strength MPa 19.0 Flexural modulus Mpa 965 Elongation@ break % 400 Impact Embrittlement temperature centidegree MAX -118 Dielectric Constant 100KHZ 2.32 1MHZ 2.31 Loss Tangent 100KHZ MAX 0.0001 1MHZ MAX 0.0001 Volume resistivity OHM-CM MIN 1x10 15 Application Mainly used for the production of high toughness of the telephone,cable insulation material LDPE: Physical Properties Test Method Nominal Value Unit Density ISO 1183 0.921 g/cm3 Melt Mass-Flow Rate (MFR) ISO 1133 1.9 g/10min Hardness Shore Hardness (shore D) ISO 868 45 Mechanical Properties Tensile Modulus ISO 527-2 175 MPa Tensile Strength Yield, ISO 527-2 9.0 MPa Break, 13.0 MPa Tensile Strain(Break) ISO 527-2 850 % Modulus of Elasticity Internal Method 250 MPa Thermal Vicat Softening Temperature ISO 306/A50 89.0 �°C Melting Temperature (DSC) DIN 53765 108 �°C Peak Crystallization Temperature (DSC) DIN 53765 97.0 �°C Heat of Fusion DIN 53765 110 J/g Electrical Volume Resistivity ASTM D257 8.5E+15 ohm â?¢cm Dielectric Strength ASTM D149 30.0 kV/mm Dielectric Constant (60Hz) ASTM D150 2.20 % Dissipation Factor (60 Hz) ASTM D150 0.00050 LLDPE Properties Test conditon Test method Test data Unit Density 0.91 MFI 2 Drop impact strength ASTM D-1709 90 g Elongation ,vertical/horizontal ASTM D-882 600/800 % tensilestrength,thermal resistance ASTM D-1004 105/95 Kg/cm elongation ASTM D-638 930 % tensile strength ASTM D-638 180 tensile strength,vertical/horizontal ASTM D-882 380/350 Vicat softening point ASTM D-1525 103 C melting point ASTM D-2117 126 C Turbidity ASTM D-1009 12 % 45 glossness ASTM D-2457 75 %
