Ginger root Botanical name: Zingiber officinale Linn. Family: Zingiberaceae. Ginger oil and oleoresins are the volatile oil derived by steam distillation of ginger and oleoresin. It is obtained by percolating the powdered rhizomes of Ginger, Zingiber officinale with volatile solvents. Ginger contains 1-2 percent of volatile oil, 5-8 percent of pungent acrid oleoresin and starch. Zingiberene is the chief constituent in the oil of ginger. Oil is employed for flavoring all kinds of food products and confectionary and finds limited use in perfumery. Oleoresin, commercially called Gingerin contains pungent principles viz. gingerol and shogaol apart from the volatile oil of ginger and is used as an aromatic, carminative, stomachic and as a stimulant. Oleoresin from ginger is obtained conventionally by extraction of dried powdered ginger with organic solvents like ethyl acetate, ethanol or acetone. Commercial dried ginger yields 3.5-10.0 per cent oleoresin. Ginger oleoresin is a dark brown viscous liquid responsible for the flavour and pungency of the spice. Ginger of commerce or `Adrak` is the dried underground stem or rhizome of the plant, which constitutes one of the five most important major spices of India, standing third or fourth, competing with chillies, depending upon fluctuations in world market prices, world market demand and supply position. Ginger, like cinnamon, clove and pepper, is one of the most important and oldest spices. It consists of the prepared and sun dried rhizomes known in trade as `hands` and `races` which are either with the outer brownish cortical layers (coated or unscraped), or with outer peel or coating partially or completely removed. Ginger requires a warm and humid climate. It is cultivated from sea level to an altitude of 1500 meters, either under heavy rainfall conditions of 150 to 300 cm or under irrigation. The crop can thrive well in sandy or clayey loam or lateritic soils. The composition of dry ginger is given below: Dry Ginger rootMoisture:6.9 % Protein:8.6 % Fat:6.4 % Fiber:5.9 % Carbohydrates:66.5 % Ash:5.7 % Calcium:0.1 % Phosphorous:.15 % Iron:0.011 % Sodium:0.03 % Potassium:1.4 % Vitamin A:175 I.U./100 g Vitamin B1:0.05 mg/100 g Vitamin B2:0.13 mg/100 g Niacin:1.9 mg/100 g Vitamin C:12.0 mg/100 g Calorific value:380 calories/100 g. Ginger Oleoresin is obtained by extraction of powdered dried ginger with suitable solvents like alcohol, acetone etc. Unlike volatile oil, it contains both the volatile oil and the non-volatile pungent principles for which ginger is so highly esteemed. Concentration of the acetone extract under vacuum and on complete removal of even traces of the solvent used, yields the so called oleoresin of ginger. Ginger oleoresin is manufactured on a commercial scale in India and abroad and is in great demand by the various food industries.
SizeMagikTM-LP4 - LOW PICK UP ONE-SHOT PRODUCT DESCRIPTION An unique copolymer sizing agent for cotton compact yarn. Special product for air jet loom. Heavy fabric constructions are easier to weave at low-size add-ons using SizeMagik-LP4. The low add-on also permits greater protection on high-speed looms expensive reeds and sensitive mechanical parts life. SPECIFICATIONS 1. Appearance: Off white Granules 2. Solubility: Soluble at 800C 3. Viscosity of 4% solution: 10 to 30 cPs (Brookfield viscometer LVDV II+ pro -Spl.2 , rpm:100 @ 80oc) 4. Ash content (w/w) : Max 3% 5. Bulk density (gm/ml) : 0.65 to 0.85 COOKING METHOD 1. Fill the required quantity of water in the cooker. 2. Gradually sprinkle SizeMagikTM-LP4. 3. Add the required quantity of softener. 4. Close the pressure cooker lid. 5. Open the steam value and cook to @ 120�¯�¿�½?�?�ºC or 35psi. 6. Retain in the cooker for 15 to 20 minutes. 7. Then transfer the size mix to storage. ECONIMICAL ADVANTAGES Yarn abrasion resistance is an important factor affecting weave ability. The friction between the warp to warp and warp to the weft is important in determining the weaving quality. Another important abrasion point in the loom is mechanical parts (Reed, Dropper pin, Heald wire, Weft picking element). Compare with other conventional size mixes and one-shot size products SizeMagik-LP4 gives better abrasion resistance strength. DE-SIZING Easily de-sizable product with hot alkali treatment. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY Stable for one year from the date of manufacture. PACKING Available in 50Kg net weight PP bags with moisture-proof liner inside.
EnzoPlast TS 8 is a Chemically Modified, Vegan, Gluten-Free, Plant- based, Non-GMO oxidized tapioca starch. EnzoPlast TS 8 is characterized by its exceptional functional properties such as low viscosity, high stability, clarity, film forming, low temperature stability and binding properties. EnzoPlast TS 8 is widely used in bakery products, frozen foods, dairy products, confectioneries, breading and coating applications, etc., It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG). APPLICATIONS ï?· EnzoPlast TS 8 is used as stabilizer in milk products, ice cream desserts, puddings, fillings, etc.,It is also used in the production of flavoured yoghurts, flavoured milk drinks, whipped cream, low fat cream, etc., ï?· EnzoPlast TS 8 can also be used as fat-mimetic and partial replacement of casein in cheese products with improved stretchability and hardness ï?· EnzoPlast TS 8 is recommended for salad and vegetable sauces, salad dressings, sugar syrups, sauces for canned meat and vegetables, mayonnaise, soups, puddings, fruit filling for confectionery products, jellies, fruit paste candy and soft gummies ï?· In baking industry, EnzoPlast TS 8 expands and improve physical possessions and physical properties of dough, increases its capability to hold gases FROZEN FOODS EnzoPlast TS 8 is used in frozen foods, refrigerated or canned foods, generally for thickening, temperature stability and control the flow in the purpose food. EnzoPlast TS 8 are used for improved adhesion and improved stability, reputedly because of covalent bonding with protein on the substrate surface. FUNCTIONAL PROPERTIES EnzoPlast TS 8 forms highly thixotropic pastes with stiff texture, which is related to its gelling capability Low gelatinization temperature and viscosity, clarity, and soft gel texture are attributes of EnzoPlast TS 8 used in breading and related applications When heated in water, EnzoPlast TS 8 form clear fluid sols. On cooling, however, the sols made by cooking EnzoPlast TS 8 is more stable or resistant to thickening and forming gels or pastes EnzoPlast TS 8 is used in formulated products. They also are used in starch batters and in breaded foods, where they improve adhesion of the batter to meat and fish Gum confections made with EnzoPlast TS 8 have longer shelf life, better gelling characteristics, increased clarity, better taste, and quicker drying Used in batters and breading for coating various food stuffs, in confectionery as binders and film formers, in dairy products as texturizers EnzoPlast TS 8 is often used for coating, sealing, batter binding, emulsification, and dough conditioning in baking and other food products.
Oxidized starch - TS is a Chemically Modified, Vegan, Gluten-Free, Plant-based, Non-GMO tapioca starch. Oxidized starch is characterized by its exceptional functional properties such as low viscosity, high stability, clarity, film forming, low temperature stability and binding properties. Oxidized starch is widely used in bakery products, frozen foods, dairy products, confectioneries, breading and coating applications, etc., It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG). APPLICATIONS Oxidized starch is used as stabilizer in milk products, ice cream desserts, puddings, fillings, etc.,It is also used in the production of flavoured yoghurts, flavoured milk drinks, whipped cream, low fat cream, etc., Oxidized starch can also be used as fat-mimetic and partial replacement of casein in cheese products with improved stretchability and hardness Oxidized starch is recommended for salad and vegetable sauces, salad dressings, sugar syrups, sauces for canned meat and vegetables, mayonnaise, soups, puddings, fruit filling for confectionery products, jellies, fruit paste candy and soft gummies In baking industry, Oxidized starch expands and improve physical possessions and physical properties of dough, increases its capability to hold gases FROZEN FOODS Oxidized starch is used in frozen foods, refrigerated or canned foods, generally for thickening, temperature stability and control the flow in the purpose food. Oxidized starches are used for improved adhesion and improved stability, reputedly because of covalent bonding with protein on the substrate surface. FEATURES AND BENEFITS Oxidized starch has improved solubility and paste clarity and could be an alternative source for food products requiring high solid contents without over-thickening It is highly bio-degradable and causes no harm to the Environment. Oxidized starch is a White powder that adds no color to application and blends well with other ingredients. It has a bland taste and so will not mask flavors or aromas.
EnzoPlast TS 8 is a Chemically Modified, Vegan, Gluten-Free, Plant- based, Non-GMO oxidized tapioca starch. EnzoPlast TS 8 is characterized by its exceptional functional properties such as low viscosity, high stability, clarity, film forming, low temperature stability and binding properties. EnzoPlast TS 8 is widely used in bakery products, frozen foods, dairy products, confectioneries, breading and coating applications, etc., It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG). APPLICATIONS EnzoPlast TS 8 is used as stabilizer in milk products, ice cream desserts, puddings, fillings, etc.,It is also used in the production of flavoured yoghurts, flavoured milk drinks, whipped cream, low fat cream, etc., EnzoPlast TS 8 can also be used as fat-mimetic and partial replacement of casein in cheese products with improved stretchability and hardness EnzoPlast TS 8 is recommended for salad and vegetable sauces, salad dressings, sugar syrups, sauces for canned meat and vegetables, mayonnaise, soups, puddings, fruit filling for confectionery products, jellies, fruit paste candy and soft gummies In baking industry, EnzoPlast TS 8 expands and improve physical possessions and physical properties of dough, increases its capability to hold gases FROZEN FOODS EnzoPlast TS 8 is used in frozen foods, refrigerated or canned foods, generally for thickening, temperature stability and control the flow in the purpose food. EnzoPlast TS 8 are used for improved adhesion and improved stability, reputedly because of covalent bonding with protein on the substrate surface. FEATURES AND BENEFITS EnzoPlast TS 8 has improved solubility and paste clarity and could be an alternative source for food products requiring high solid contents without over-thickening It is highly bio-degradable and causes no harm to the Environment. EnzoPlast TS 8 is a White powder that adds no color to application and blends well with other ingredients. It has a bland taste and so will not mask flavors or aromas.
Foodix- Offering Instant Mix for Murukku. One of the Most wanted Indian Snacks and widely prepared when the festively time Like Diwali. Preparation 1. Empty the contents of this pack and mix it with 2 cups (Approx. 300ml) of water. Then add 25g of butter or two tablespoons of oil (30 ml) and make it into a dough.2. Heat oil in a pan3. Insert the dough into the mould and press the mould to make spirals either on a cloth, butter paper, foil or flat hold ladle.4. Place the ladle in the oil or remove the Murukku and drop gently in the hot oil. Fry until golden brown and crisp.5. Drain the fried MURUKKU on the kitchen tissue to remove excess oil. Cool them completely. Store them in an airtight container for delicious Murukku. Can be used for preparing Spicy/Sweet Murukku. Add chilli powder/ sugar as per your preference Serving size This pack gives 50 pieces of Murukku (6 cm diameter)
Las 4NF- Lactose Substitute Non- Fat Solid is an Enzymatically Modified, Clean Label, Vegan, Gluten-Free, Plant-based and Non-GMO starch used as a special additive for improving texture of Paneer. It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG). APPLICATIONS 1. Milk is first heated (pasteurizing) to 85�°C and held for 12 minutes. 2. Add 2% to 20% of LAS 4NF based on the Protein Content of the Milk to the pasteurized milk and stir slowly to ensure full dissolving at 80C. 3. LAS 4NF itself contains coagulant. If necessary add coagulant as per the costumer requirement slowly to the milk by slow stirring, maintaining the temperature at 70�° C. 4. Keep Slow stirring for complete separation of solids and whey. (Indication: Whey will turn to light green color and small lumps of solids will settle down) 5. The whey water is filtered through a fine mesh of muslin cloth. The separated particles remain in muslin cloth and it is held in hoofer. 6. Apply pressure on the covered solid spread evenly on hoofer, with a flat lid in lay till water droplets stop. 7. Then the Paneer is pre-cooled in pure water at room temperature for 10 mins or till the external sides can be held in hand water for 10 mins , then dip in chilled water for 4 hours. DOSAGE Use 2 to 20% of LAS 4NF of total batch size, based on the protein content of the milk. For lower protein content in the milk higher LAS 4NF need to be used.
EcoTexTM-SL20 - PVA FREE ONE-SHOT PRODUCT DESCRIPTION New generation eco-friendly one-shot product for a high-speed shuttleless loom. It is mainly used for 6 to 203 cotton yarns sizing. This product is entirely biodegradable and ecological. Products are made from grafted starch, anionic polymers, and synthetic fatty matters. It contains a maximum of 13% moisture and an optimized viscosity level. Easily disperse in cold water with little swelling property due to high binding property. Having high penetration power and plasticizing power for heavy construction fabrics weaving. SPECIFICATIONS 1.Appearance - Off white powder 2.pH value of 5% solution - 6 to 8 3.Solubility - Partially soluble in cold water 4.Viscosity of size mix - 5 to 6 sec (SITRA -6mm cup) 5.Total Moisture - Max 13% 6.Bulk density - 0.5 to 0.6 g/ml 7.Total ash - Max4% COOKING METHOD 1. Fill the required quantity of water in the cooker. 2. Gradually add EcoTexTM-SL20 and mix for 2 min. 3. Add other ingredients and mix for 2 min. 4. Close the pressure cooker lid. 5. Open the steam value and cook to @ 120�? �ºC or 35psi. 6. Retain in the cooker for 15 to 20 minutes. 7. Then transfer the size mix to storage. PROPERTIES 1. Moisture regain: The formation of thin flexible film absorbs water molecules from atmospheric air that maintains the required moisture content of the sized yarn. This property improves the weaving efficiency by reducing the warp stops. 2. Film property: The very thin strong film gives the inter fibre penetration that improves yarn tensile strength. Optimum elongation and flexible property significantly reduce warp break by overcoming the applied tension during weaving. 3. Abrasion resistance: A strong film withstands the mechanical friction between yarn to yarn and yarn to machine parts like reed, dropper pin, heald wire, and weft picking element. DE-SIZING Easily de-sizable product with hot alkali treatment. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY Stable for one year from the date of manufacture. PACKING Available in 50Kg net weight PP bags with moisture-proof liner inside.
TECHNICAL DATASHEET EcoTexTM -SL55 - PVA FREE ONE-SHOT PRODUCT DESCRIPTION Powder types unique one-shot product which needs no extra native starch, modified starch, binder, softener, lubricant to be added further. It is mainly used for Shuttle-less loom woven warp yarns counting above the 40s to 60�¢??s Cotton. Products are made from grafted starch, anionic polymers, and synthetic fatty matters. It contains a maximum of 13% moisture and an optimized viscosity level. Easily disperse in cold water with little swelling property due to high binding property. SPECIFICATIONS 1.Appearance - Off white powder 2.pH value of 7% solution - 5 to 7 3.Solubility - Partially soluble in cold water 4.Viscosity of size mix - 4 to 5 sec (SITRA -6mm cup) 5.Total Moisture - Max 13% 6.Bulk density - 0.5 to 0.6 g/ml 7.Total ash - Max4% COOKING METHOD 1. Fill the required quantity of water in a cooker 2. Gradually add EcoTexTM-SL55 and min for 2 min. 3. Close the pressure cooker lid. 4. Open the steam value and cook to @ 120�? �ºC or 35psi. 5. Retain in the cooker for 15 to 20 minutes. 6. Then transfer the size mix to storage. PROPERTIES 1. Moisture regain: The formation of thin flexible film absorbs water molecules from atmospheric air that maintains the required moisture content of the sized yarn. This property improves the weaving efficiency by reducing the warp stops. 2. Film property: The very thin strong film gives the inter fiber penetration that improves yarn tensile strength. Optimum elongation and flexible property significantly reduce warp break by overcoming the applied tension during weaving. 3. Abrasion resistance: The strong film withstands the mechanical friction between yarn to yarn and yarn to machine parts like reed, dropper pin, heald wire, weft picking element. DE-SIZING Easily de-sizable product with hot alkali treatment. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY Stable for one year from the date of manufacture. PACKING Available in 25Kg net weight PP bags with moisture-proof liner inside
WE HAVE THE SUGAR IF YOU CAN LIVE WITH OUR TERMS BELOW. WE HAVE MADE AND ARE CURRENTLY MAKING DELIVERIES UNDER THESE TERMS. We, below present our general procedures for the purchase and sale of sugar of Brazilian origin: 1- Buyer issues a Letter of Intention (LOI) addressed to Seller; 2- Seller issues a Soft Corporate Offer (SCO); 3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller; 4- Seller issues Full Corporate Offer (FCO); 5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller; 6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented; 7- SPA is signed by Seller and Buyer; 8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller�´s Bank; 9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC); 10- Seller issues Performance Bond (PB) 2%; 11- Seller prepares the product and export documents; 12- Buyer receives the export documents by mail; 13- Buyer makes payment 100% to Seller�´s Bank through transfer bank (Swift Message MT-103); 14- Shipping; 15- Seller sends the original export documents to Buyer; NOTES: The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking. The issuance of a financial instrument (SBLC / DLC) can be replaced by a 30% guarantee deposit that will be applied in the last delivery of the contract (in the case of 12-month programs) or in the settlement of the single payment in the case of spot sales. This procedure applies to SPOT sales and 12-month Programs. MINIMUM SPOT ORDER IS 12,500 MT, NO EXCEPTIONS https://raargroupusa.com/icumsa-45-sugar We do offer container loads and spot orders of a minimum of 12,500 ton. We need to know your target price and delivery location in order to quote. Please send us your Target Price if you are serious.