Buyer is interested to receive quotations for the following RFQ -
Product: Steel Billets
Specifications:
Billet 130×130×12m
Physical parameters: Parameters Value
Rhombodity 3% Max
Diagonal difference = 10mm
Corner radius 4 mm Max
Straightness Camber 5mm/meter
Angular Twist Not more than 1 degree per meter and not more than 6 Degree over 12 meter length.
Cutting Both ends will be Shear Cut
Identification At the end of each billet cast number and size will be Stamped or hand written
Surface The defects like longitudinal cracks, transverse cracks, scab and thick scale, slag patches, surface blowholes etc. will be within acceptable range.
Please quote for the following wholesale product requirement -
Product Name: Carbon Steel Pipes
Specifications :
PRESSURE, API 5l Sl2, X 52, Wall Thickness 7- 9mm For On Hand Project At Makkah, Saudi Arabia
Dn. 1600mm, Dn. 1000mm, Dn. 800mm, Dn. 600mm
THIS PIPES REQUIRED WITH INTERNALLY COATED BY LIQUID EPOXY PAINTING ACCORDING TO AWWA C210, 120 Micron
And Externally Coated With 3 Ply PE , 3mm According To Din. 30670
Buyer is interested to receive quotations for the following RFQ -
Product : Steel Pipes
Specifications:
Pipe, SCH-20, BE, ERW
Material: ASTM A53 Gr. A, ANSI B36.10
NS- 10" x 6000mmL
, Wall Thickness-6.35mm
60 (Sixty)
meter
02
Pipe, SCH-20, BE, ERW
Material: ASTM A53 Gr. A, ANSI B36.10
NS- 12" x 6000mmL
, Wall Thickness-6.35mm
48 (Forty-Eight)
meter
03
Pipe, SCH-20, BE, ERW
Material: ASTM A53 Gr. A, ANSI B36.10
NS- 14" x 6000mmL
. Wall Thickness-7.92mm
48 (Forty-Eight)
meter
04
Pipe, EFW, BE. SCH-10, ANSI B36.10
Material: ASTM A283 Gr. D
NS- 16" x 6000mmL
, Wall Thickness-6.35mm
12 (Twelve)
meter
05
Pipe, EFW. BE. SCH-10. ANSI B36.10
Material: ASTM A283 Gr. D
NS- 20" x 6000mmL
. Wall Thickness-6.35mm
36 (Thirty-Six)
meter
Quantity: as above
Specifications:
MS Plate ( 6100X1500X6 mm )-6 mm MS Plate ( 6100X1500X8 mm )-8 mm MS Plate ( 6100X1500X12mm )-12mm MS Plate ( 6100X1500X10 mm )-10 mm MS Angle ( 1.5"X1.5"X5 mm ) MS Angle ( 2"X2"X5 mm ) MS C Channel ( 4"X2"X6 mm ) MS Hot Roll ( 6000X200X150X5X6 mm ) MS Rod ( 500 DWR )-100 MS Plate-24 mm MS Rod ( 500 DWR )-10 mm MS Angle-50X50X5X6000 mm MS Plate-20 mm MS Plate-30 mm MS Plate-25 mm MS Rod ( 500 DWR )-12 mm MS Plate-35 mm MS Checker Plate-4 mm MS HoleSheet ( Alternate-4'X8'X4 mm ) ( 4'X8'X3mm, Hole Dia-6 mm MS HoleSheet ( Alternate-4'X8'X3 mm ) ( 4'X8'X4mm, Hole Dia-10 mm MS Hole Sheet ( 4'X8'X3 mm ) Hole Dia:8 mm MS Hole Sheet ( 4'X8'X3 mm ) Hole Dia:12 mm MS Shaft -16 mm MS Shaft -50 mm
Quantity : 1 container
