Product quality Tin is a silvery white and soft metal. It is soft and has good ductility. Its hardness is relatively low. You can cut it with a knife. At the temperature of 100 â??, it can develop into very thin tin foil, and the thickness can be less than 0.04 mm. Pure tin can be used as coating materials, and has a very wide range of applications in food, machinery, electrical appliances, automobiles, aerospace and other industrial sectors. Each ingot weighs 25kg+ 1kg; Bundled, each bundle weighs about 1050 kg The impurity composition of our tin ingots:
We are able to supply Tin in many forms including LME registered and non registered, ingots, slabs, bars, foil, granules, powder, anodized activated powder, shot, wire, sticks, ingots, and “mossy tin”. Tin is a silvery-white metal, is malleable, somewhat ductile, and has a highly crystalline structure. The element has two colours, with a cubic structure which changes at allotropic forms. On warming it is grey, the ordinary form of the metal. When Tin is cooled below 13.2°C, it changes slowly from white to grey or tetragonal structure. This change is affected by impurities such as Aluminium and Zinc, and can be prevented by small additions of Antimony or Bismuth.
Metal tin is mainly used in the manufacture of alloys. Tin and sulfur compounds - tin sulfide, which is similar in color to gold, is commonly used as a gold pigment. Tin's modern application is as a solder for the electronics industry. Used in various purities and alloys (often with lead or indium), tin solders have a low melting point, which makes them suitable for bonding materials. Standard ASTM B29-03, BS EN 12659:1999, GB/T 469 -2005 , Content Pb â?¥ 99.99 % Density 11.34 g / cm 2 Color Bluish Weight 35 kgs / lump, 55 kgs / lump Dimension 21" x 4" x 2.5" Package Standard Sea-worthy package, fixed by belt per ton Shape Rectangular Lump Application lead-acid storage batteries Ammunition, cable sheathing, and building construction materials counterweights, battery clamps cast products such as: bearings, ballast, gaskets, type metal, terne plate, and foil Container Size 20Gp - 2.352(width) *2.385 ( Height ) * 5.90 ( Inside length ) Meter 40Gp - 2.352(width) *2.385 ( Height ) * 11.8 ( Inside length ) Meter 40HQ - 2.352(width) *2.69 ( Width ) * 5.90 ( Inside length ) Meter
1,Hight prurity (99.99% min) Metal Antimony (Sb) 2,4N>99.99%, 5N>99.999%, 6N>99.9999%, 7N>99.99999% 3,Lumps/Ingot/Granule/Bar 4,Color: Gray 5,Atomic weight: 121.760 6,Electronegativity: 2.05 7,CAS No.: 7440-36-0 8,Density: 6.697 g/cm3 (25â??) 9,Melting Point: 630.63 â?? 10,Boiling Point: 1587 â?? 11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.
Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
Magnesium Ingot -
Tin Ingot
Metal Tin Ingot Price: $27,220 -- $30,572 / ton Specification: 25kg/ block Content: 99.95% Product density: 7.29g/cm3 Packing: in bundles or on demand Metal tin ingot has good ductility, especially at 100 �° C, can develop into extremely thin tin foil, thickness can be as thin as 0.04 mm. Used in the production of tinplate, tin-based bearing alloy, tin-lead solder, tin-chemical products, etc., in food packaging, electronics industry, glass manufacturing industry has a wide range of applications. Element: 99.95% Port: Qingdao, Shanghai, Tianjin, Shenzhen, etc. Certificate: ISO, etc. Payment method: T/T,Western Union,L/C,etc. Specification: 25Kg/block, can be customized according to customer needs. Package: Standard export packing or as required. Application: It can be used as coating material in food, machinery, electrical appliances, automotive, aerospace and other industrial sectors have a wide range of applications.
High quality Copper-based Alloy Ingots and Aluminium Alloy Ingots Gunmetal, tin bronze, phosphor bronze, aluminium bronze, lead bronze, manganese bronze, silicon bronze, brass, master alloy ingots, and other items are major products. By maintaining a constant focus on improving technology, quality assurance, and customer service, we have established a strong and steady market position. The company's management team has years of experience in the sector and is driving the organisation to new heights with the goal of being the dominant force in the global copper alloy ingot market.