Lightweight, low profile design for use in confined spaces Baked enamel finish for increased corrosion resistance Plunger wiper reduces contamination, extending cylinder life CR-400 coupler and dust cap included on all models Grooved plunger end with threaded holes for mounting tilt saddles Integral handle on RCS-1002 for easy carrying Plated steel plungers Single-acting spring return
Net beverage cylinders are made by aluminum 6061, with 40% weight reduction than steel cylinders. Unique internal and external treatments provide a superior corrosion resistance assuring gases clean and smelless. Cylinders are made strictly to safety standards all over the word, assuring a consistent and stable performance. High standard quality control and detailed instruction for use & maintenance make sure safety operation and performance.
Portable medical oxygen cylinders design and manufacture by net, are produced through advanced technology. Comparing with conventional respirators, we use aluminum or aluminum composite cylinders instead of steel ones, with weight reduction of 40%-70%. More preferable for people with breathing problems. Full specifications meet different customers¡¯ demands. Working pressure: 150bar-200bar. Valves, fittings and threads according to customer¡¯s requirements. Please google ¡°netcylinders¡± to find our web for more information.
ISO9809-3 150bar 37MN TUV TPED Oxygen Tanks Gas Cylinders 1 Minimum order quantity: 100 only 2 Use cylinders:Our seamless steel cylinders are widely used in industry, medical devices, fire fighting and scientific research Oxygen gas cylinders During the blanking process of gas cylinder production, the inner and outer surface and end face of the steel pipe shall be checked one by one, and the inner and outer surface of the billet shall not have cracks, serious pits, folds, folds, layers apart and scarring. The end face is smooth, no obvious burr, the inner and outer surface is clean, no feeding iron and debris, and check the perpendicularity and perpendicularity of the cylinder body one by one. This document (EN ISO 9809-3:2010) has been prepared by Technical Committee ISO/TC 58 Gas cylinders in collaboration with Technical Committee CEN/TC 23 Transportable gas cylinders, the secretariat of which is held by BSI TUV gas cylinders Interpretation of test results The interpretation of the burst test results shall involve: a) examination of the pressure/time curve or pressure/volume of water used curve, to permit determination of the pressure, py, at which plastic deformation of the cylinder commences, together with the bursting pressure ph; b) examination of the burst tear and of the shape of its edges. 150bar gas cylinders Product Information: 10.8 litres to 80 litres; 89mm-267mm cylinder outer diameter; Working pressure is 150bar; Hydrostatic test pressure is 250bar; 37 mn material; Iso9809-3 or GB/T5099.3 production standards; 2The minimum design wall thickness of gas cylinders is 2.4mm-6.2mm; The cylinder body weight is 1.60kg-72.4kg; The height of the cylinder body is 197mm-1520mm; Cylinder mouth threads include PZ19.2,PZ27.8,PZ39; 25E; 3/4-14 NGT, etc.; Maximum gas storage is 0.12m3-12m3 (150L-12000L) 3Aliases: Oxygen gas cylinders; Germany Rhein gas cylinder; 150 bar cylinder; Oxygen bomb; Gas cylinders 4A cylinder shall be considered to be of a new design, compared with an existing approved design, when at least one of the following applies: a) the nominal outside diameter has been changed; b) the guaranteed minimum thickness has been changed; c) the hydraulic test pressure, ph, has been increased (where a cylinder is to be used for lower pressure duty than that for which design approval has been given, it shall not be deemed to be a new design); d) the guaranteed minimum yield strength, Reg and/or the guaranteed minimum tensile strength, Rmg, have changed. Oxygen gas cylinders
Net beverage cylinders are made by aluminum 6061, with 40% weight reduction than steel cylinders. Unique internal and external treatments provide a superior corrosion resistance. Cylinders are made strictly to safety standards all over the word, assuring a consistent and stable performance. High standard quality control and detailed instruction for use & maintenance make sure safety operation and performance.
Usage: Automation and Control Power: Hydraulic Pressure Direction: Single-acting Cylinder Stroke: 5110mm Weight: 356kg Material: Steel Structure: General Cylinder Standard: Standard Cylinder Diameter: 172mm Lift Tonnage: 62-96t Volume: 88L Product Description Advantages: 1, Big lifting force: Adopt high strength imported materials, work under pressure up to 22 Mpa, the unit weight of the lifting force is 10% ~ 20% higher than the similar products. 2, Higher efficiency: Smaller cylinder diameter makes the smaller working volume, the speed of oil cylinder lifting and falling are more fast and more efficiency, running more can bring more benefits. 3, Stronger weather resistance: The application new materials and special structures can adapt to different environment from cold to hot and can round-clock operation. 4, Better performance: Imported high quality materials and spare parts make outstanding products performance. Precision of the system structure design, lean manufacturing and long service life can bring a lot of benefits to customers.
Supplier: Lpg gas regulator, valves, cylinders, plastic component weight , rubber product 1
Buyer: Zinc alloys ingots z5, deraline, rubber
CNG vehicle mounted gas cylinder uses finite element stress analysis technology to optimize the winding internal pressure design and cooperates with its own patented winding tooling to realize continuous, controllable, and variable pressure fiber winding. Core competitiveness: 42% weight reduction, substantial cost reduction and long service life. No. Name Model High Pressure/Mpa Cylinder outer diameter/mm Length/mm Water volume/L IV Type Cylinder 235L Gas Cylinder CNG4-C-450-235-20S 20 450 1880 235 265L Gas Cylinder CNG4-C-450-265-20S 20 450 2070 265 305L Gas Cylinder CNG4-C-450-305-20S 20 450 2400 305 115L Gas Cylinder CHG4-C-410-115-35S 35 410 915 115 55L Gas Cylinder CNG4-C-327-55-20T 20 327 990 55 66L Gas Cylinder CNG4-C-356-66-20T 20 356 965 66 66L Gas Cylinder CNG4-C-356-66-70T 70 410 965 66
Bimetallic cylinder(petroleum machinery parts) Material:45# Weight:40.5kg Process:Forging Description:Bimetallic liner is currently widely used mud pump hydraulic fitting
