Dong Guan New-Orient Technology Co.,Ltd.

Honeywoní»s silicone sponge is with high grade silicone rubber material and inimitable technique, with Good character of high temperature resistant, aging resistant, ozone resistant, insulation property, fuel Oil resistance, lubes resistance, no smell and wear well. High compressibility and low compression set Over a wide temperature range, and good acoustic and thermal insulation properties. Apply to -50í ~+200í protect and heat insulation for long term continuous use and -70í ~ +260í for intermittent Use on all kinds of machine. Feature: Standard size(mm)í+ 290*380*ú¿5-15) 380*380*(5-15) 400*600*(5- 15) 500*500*(2-30) 500*600*(5-15) 600*800*(5-15) 1000*1000*(5-12) 1000*1200*(5-12) Special size(mm)í+minimum length:no limitation maximum length:no limitation, or in roll Minimum width:no limitation maximum width:1200 minimum thickness:3.0 maximum Thickness:30.0 Product colorí+ redú¼greyú¼natural, whiteú¼black or any other required color Applicationí+ heat transfer print equipment, electronics and electrics, machine and sealcharacterí+high temperature resistant, aging resistant, ozone resistant, insulation property, fuel oil Resistance, lubes resistance, no smell and wear well, good acoustic and thermal insulation properties. í÷ technical indexú¦ Styleú¦ open cell Surfaceú¦double fabric impression Tear strengthú¦55kn/m Press strengthú+30mpa Elongationú¦100% Hardnessú¦8-50 shore a Temperature rangeú¦-50-220c continuously; -70í ~ +260í for intermittent use Densityú¦0.55-0.9g/cm3 Flame resistanceú¦94v-0 Dielectric breakdown voltageú¦>3kv Dielectric constantú¦5.5 khz Tensile strength: 10-30psi Volume resistanceú¦1.*1011 ohm-m Thermal conductivityú¦0.1 w/m-k Thick tolerance: ía0.05mm~0.1mm

Place of Origin: Guangdong, China (Mainland) Brand Name: laimeisi Model Number: LMS Application: Fiberglass Mesh Cloth Weight: 158 GSM - 1740 GSM Surface Treatment: Silicon Coated Width: 300~600mm, 300~600mm W eave Type: Plain Woven Yarn Type: C-Glass Alkali Content: Alkali Free Standing Temperature: -40?~260? Hardness: 70Shore Specific Gravity: 1.6~2.3g/cm3 Size: 50M/Roll Thickness: 0.2~3.0mm Flammability: UL94V-0 Continuous Use Temp: -40?~260? RoHS: PASS Color: Pink,Blue,Grey

Foaming Silicone Rubber Description HY-F666 is a RTV-2 liquid silicone rubber, general called two-component room temperature vulcanization silicone, part A is silicone rubber, part B is catalyst / curing agent. Foam silicone is platinum cure silicone / addition cure silicone, a kind of environmentally friendly material which is totally non-toxic ,tasteless, safety and health, food grade. Foaming Silicone Rubber Application HY-F666 Foaming Liquid Silicone Rubber,which is widely used as a filling material for Mannequin,Streetlight Filling,seat cushion, silicone clone human, polyurethane furniture, sheet material and other rubber products.since silicone rubber foam is very lightweight, very soft and has good cushioning effect. F6 FOAMING SILICONE RUBBER ADVANTAGES - FDA certified, medical grade, totally nontoxic, odorless, harmless, and eco-friendly - Wide hardness from 0-10 shore A. - Wide bubbling times - High temperature resistance - Good flexibility, permeability and insulativity - No oily problem

Honeywon»s silicone sponge is with high grade silicone rubber material and inimitable technique, with Good character of high temperature resistant, aging resistant, ozone resistant, insulation property, fuel Oil resistance, lubes resistance, no smell and wear well. High compressibility and low compression set Over a wide temperature range, and good acoustic and thermal insulation properties. Apply to -50µ ~+200µ protect and heat insulation for long term continuous use and -70µ ~ +260µ for intermittent Use on all kinds of machine. Feature: Standard size(mm)+ 290*380*¿5-15) 380*380*(5-15) 400*600*(5- 15) 500*500*(2-30) 500*600*(5-15) 600*800*(5-15) 1000*1000*(5-12) 1000*1200*(5-12) Special size(mm)+minimum length:no limitation maximum length:no limitation, or in roll Minimum width:no limitation maximum width:1200 minimum thickness:3.0 maximum Thickness:30.0 Product color+ red¼grey¼natural, white¼black or any other required color Application+ heat transfer print equipment, electronics and electrics, machine and sealcharacter+high temperature resistant, aging resistant, ozone resistant, insulation property, fuel oil Resistance, lubes resistance, no smell and wear well, good acoustic and thermal insulation properties. + technical index¦ Style¦ open cell Surface¦double fabric impression Tear strength¦55kn/m Press strength+30mpa Elongation¦100% Hardness¦8-50 shore a Temperature range¦-50-220c continuously; -70µ ~ +260µ for intermittent use Density¦0.55-0.9g/cm3 Flame resistance¦94v-0 Dielectric breakdown voltage¦>3kv Dielectric constant¦5.5 khz Tensile strength: 10-30psi Volume resistance¦1.*1011 ohm-m Thermal conductivity¦0.1 w/m-k Thick tolerance: a0.05mm~0.1mm

Silicon rubber heaters have wire-wound or etched foil heating elements protected by Fiberglass-reinforced silicon rubber vulcanized and compressed at high temperature and press. They are thin, bendable and shaped to fit almost any equipment. Heat can be applied to the Most complex shapes, geometries, curves and pipes conceivable without sacrificing efficiency or Dependability. Techical parameters: 1 maximum temperature resistance of insulator¦300íµ 2 maximum operation temperature¦ 250íµ 3 insulation resistance¦í²500 mª+/dc 1000v 4 breakdown voltage¦í² ac1500v/5s 5 capacity tolerance¦ía5% 6 temperature range: -60íµí¬250íµ continuous heating; heating element: available with either Etched foil or wire-wound elements: 7 dimension:maximum 1.2míßxm minimun 15mmíß15mm; thickness 1.5mm¿thinnest 0.8mm¼ Thickest 4.5mmlead wire length:standard 130mm. Installation: 1 with backing psa (pressure sensitive adhesive or called self adhesive, self stick adhesive) As 3m psa 2 with vulcanization or curing and compression at high temperature and press 3 with spring and hole or eyelet 4 with clamps Benefits: 1 heating evenly, accurate and adjustable 2 various shapes, holes, cutouts, profiled watt densities and multiple voltages 3 put heat exactly where it is required 4 high dielectric strength, flexibility, bendable and cost effectiveness. 5 resistance to temperature extremes, moisture, weathering, radiation, fungus and chemical Attack

Silicon rubber heaters have wire-wound or etched foil heating elements protected by Fiberglass-reinforced silicon rubber vulcanized and compressed at high temperature and press. They are thin, bendable and shaped to fit almost any equipment. Heat can be applied to the Most complex shapes, geometries, curves and pipes conceivable without sacrificing efficiency or Dependability. Techical parameters: 1 maximum temperature resistance of insulatorú¦300íµ 2 maximum operation temperatureú¦ 250íµ 3 insulation resistanceú¦í²500 mª+/dc 1000v 4 breakdown voltageú¦í² ac1500v/5s 5 capacity toleranceú¦ía5% 6 temperature range: -60íµí¬250íµ continuous heating; heating element: available with either Etched foil or wire-wound elements: 7 dimension:maximum 1.2míßxm minimun 15mmíß15mm; thickness 1.5mmú¿thinnest 0.8mmú¼ Thickest 4.5mmlead wire length:standard 130mm. Installation: 1 with backing psa (pressure sensitive adhesive or called self adhesive, self stick adhesive) As 3m psa 2 with vulcanization or curing and compression at high temperature and press 3 with spring and hole or eyelet 4 with clamps Benefits: 1 heating evenly, accurate and adjustable 2 various shapes, holes, cutouts, profiled watt densities and multiple voltages 3 put heat exactly where it is required 4 high dielectric strength, flexibility, bendable and cost effectiveness. 5 resistance to temperature extremes, moisture, weathering, radiation, fungus and chemical Attack 6 heat can be applied to the most complex shapes, geometries, curves and pipes conceivable Without sacrificing efficiency or dependability. 7 easily bonded and/or mechanically mounted, even onto the curving surface.

We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.

High temperature core-tex silicone rubber impregnated coated colored fireproof fiberglass fabric cloth Place of Origin: Guangdong, China (Mainland) Brand Name: laimeisi Model Number: fireproof fiberglass cloth Application: Fiberglass Mesh Cloth Weight: 200g Surface Treatment: Silicon Coated Width: 1000mm Weave Type: Plain Woven Yarn Type: C-Glass Alkali Content: Alkali Free Standing Temperature: 140~360 Product name: silicone rubber coated colored fireproof fiberglass fabric cloth Color: As Picture Shown Breakdown Voltage: >4 KV Hardness: 75 Continuous Use Temp: -40~260 ROHS Test: PASS Type: fireproof cloth Keyword: Silicone rubber coated fiberglass fabirc cloth Good Features: Corrosion Resistance Certification: Rohs Packaging & Delivery Packaging Details: PP bag and standard carton or follow customer request Delivery Detail: Shipped in 7 days after payment 1. Grade: fireproof cloth,fireproof fiberglass cloth,slicone cloth 2. Size: 300mm*50m ,60mm*50m 3. Standard: DIN 315 4. Certification: ISO9001, SGS, CTI, ROHS Feature of core-tex silicone rubber impregnated coated colored fireproof fiberglass fabric cloth 1.Excellent resistance to heat (dry air), at +260o C continuous and +260o C intermittent.Remains flexible at low temperatures of -40oC. 2.Resistant to ultra-violet light, ozone and weathering processing,pharma ceutical and cosmetic manufacturing area. 3.Keep constant even at high temperatures. 4.Resistance to chemicals; moderate resistance to general chemical products. 5.fireproof fiberglass cloth Application of core-tex silicone rubber impregnated coated colored fireproof fiberglass fabric cloth 1.Medical, pharmaceutical and food processing industries. 2.Automotive, electronics and lighting sectors, amongst others. 3.LED, M/B, P/S, Heat Sink, 4.electronic components: IC, CPU, MOS

Lms-STF series heat pressed silicon rubber sheet Product features: 1.Extremely high heat transfer, heat resistance and buffer. 2. Not to FPC, Glass and other damage. 3. The heat has super stable characteristics and the pressure on the product consistency. 4. High resilience and non-stick. 5. Antistatic, no powder on the surface. Product specifications: 1, (thick:0.2mm--0.45mm) * (width:8mm-600mm) * (length:5-30m). 2, special specifications can be customized according to customer demand, and provide our customers customized various specifications of the iceberg. 3, the products are divided into common type SG (gray) and anti-static SGB (black). 4, the product is commonly used inside diameter 32mm, 38mm, can be customized according to customer demand. Product application: COG/FOG hot pressing bonding process for various display screens, ACF conductive film hot pressing, etc.. Product application: application of various display COG\FOG hot state fixed process, or for transistor, IC and other electronic semiconductor products for insulation material, heat dissipation material use, or application in electric regulator and a temperature sensor, the advance on the bottom surface of the hot pressing head, the conduction temperature more uniform, the isolation is pressing products and head, and can prevent electrostatic isolation protection role. Specifications: Thickness:0.2mm~0.45mm Width:8mm~600mm Length:5m~30m SizeCustomer Size Accepted Packaging Details:As customer requried Color:Grey andBlack Hardness(Shore A):75~80 SurfaceMatte Use Temperature-60~320 Volume Independence(Ω.cm)10^8--10^12 Thermal Conductivity(w/mk):0.5~0.73 Elongation(%):165~180 Tensile Strength(Mpa):6.0~7.3 Compression(Max%):26~30