Supplier: Synthetic flavors like apple
Natural Flavours Natural Identical Flavours Synthetic Flavours Powder Flavours ( Encapsulated ) Natural Oleoresins & Seasoning Snack Flavours like Tomato, Cheese, BBQ, Ketchup, Chilli Ethyl Vanillin Vanillin
ChikMat P1 is a Vegan, Gluten-Free, Plant-based and Non-GMO starch. ChikMat P1 is used as an excellent additive or ingredient for Crispy oil fried vegetarian and non-vegetarian products. ChikMat P1 will provide structure, tenderness & binding power in baking. It even gives excellent crispiness by better even coating and with low oil absorption. It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG). APPLICATION: GLUTEN FREE ALTERNATIVE FOR FLOUR AND BAKERY: ChikMat P1 can make a suitable gluten-free alternative for flour in baking recipes like Waffles, Muffins, Gluten free flour mixes. ChikMat P1 attract and hold more water and helps to increase the moisture content in baked goods and provides structure, tenderness & binding power in baking. FRYING FOODS: ChikMat P1 could serve as a suitable fried food coating where the coating is light and crisp. It helps to lock the flavour of the product while frying. It can improve the texture of the coat foods, such as chicken, fish, or vegetables, before frying and reduces the absorption of oil. The product such as oil fried Nuggets, Potato Shots, and Cheese bites. Even it can be used in Premixes- 65 Masala, Instant Crispy Fry Mix, Manchurian Mix, Bonda Mix, etc... ChikMat P1 coating can give the foods a golden and crispy outer layer during the frying process. PROCEDURE: Replace 5-20 % of Corn flour with ChikMat P1 then add at the time of blending while adding other raw materials FEATURES AND BENEFITS Increase special appearance to the fried products. Better dispersion of spices and other ingredients. Improves texture. Enhance flavor. Low oil absorption. Excellent crispiness. Better even coating
Capsicum Oleoresin is prepared by extracting the crushed capsicum (Capsicum Annum Linn) with volatile solvents by percolation method. It contains the pungent principles, capsicin not less that 8 percent. It also contains the red colouring matter called Capsanthin. This product is a powerful irritant and a carminative, which is also used as a counter irritant in lumbago and neuralgia. It can also be used to treat stomach ache that involves poorly functioning stomach muscles and as an antibacterial agents. Extraction of oleoresin capsicum from peppers involves finely ground capsicum, from which capsaicin is extracted in an organic solvent such as ethanol. The solvent is then evaporated, and the remaining wax like resin is the oleoresin capsicum. An emulsifier such as propylene glycol is used to suspend the OC in water, and pressurized to make it aerosol in pepper spray. The high performance liquid chromatography (HPLC) method is used to measure the amount of capsaicin within pepper sprays. Scoville Heat Units (SHU) are used to measure the concentration or "heat" of pepper spray. A synthetic analogue of capsaicin, pelargonic acid vanillylamide (desmethyldihydrocapsaicin), is used in another version of pepper spray known as PAVA spray which is used in the United Kingdom. Another synthetic counterpart of pepper spray, pelargonic acid morpholide, was developed and is widely used in Russia. Its effectiveness compared to natural pepper spray is unclear. Pepper spray typically comes in canisters, which are often small enough to be carried or concealed in a pocket or purse. Pepper spray can also be bought concealed in items such as rings. There are also pepper spray projectiles available, which can be fired from a paintball gun. It has been used for years against demonstrators. Derived from chilli peppers, oleoresin capsicum is the active ingredient in pepper spray and in some topical pain relievers.
Ginger root Botanical name: Zingiber officinale Linn. Family: Zingiberaceae. Ginger oil and oleoresins are the volatile oil derived by steam distillation of ginger and oleoresin. It is obtained by percolating the powdered rhizomes of Ginger, Zingiber officinale with volatile solvents. Ginger contains 1-2 percent of volatile oil, 5-8 percent of pungent acrid oleoresin and starch. Zingiberene is the chief constituent in the oil of ginger. Oil is employed for flavoring all kinds of food products and confectionary and finds limited use in perfumery. Oleoresin, commercially called Gingerin contains pungent principles viz. gingerol and shogaol apart from the volatile oil of ginger and is used as an aromatic, carminative, stomachic and as a stimulant. Oleoresin from ginger is obtained conventionally by extraction of dried powdered ginger with organic solvents like ethyl acetate, ethanol or acetone. Commercial dried ginger yields 3.5-10.0 per cent oleoresin. Ginger oleoresin is a dark brown viscous liquid responsible for the flavour and pungency of the spice. Ginger of commerce or `Adrak` is the dried underground stem or rhizome of the plant, which constitutes one of the five most important major spices of India, standing third or fourth, competing with chillies, depending upon fluctuations in world market prices, world market demand and supply position. Ginger, like cinnamon, clove and pepper, is one of the most important and oldest spices. It consists of the prepared and sun dried rhizomes known in trade as `hands` and `races` which are either with the outer brownish cortical layers (coated or unscraped), or with outer peel or coating partially or completely removed. Ginger requires a warm and humid climate. It is cultivated from sea level to an altitude of 1500 meters, either under heavy rainfall conditions of 150 to 300 cm or under irrigation. The crop can thrive well in sandy or clayey loam or lateritic soils. The composition of dry ginger is given below: Dry Ginger rootMoisture:6.9 % Protein:8.6 % Fat:6.4 % Fiber:5.9 % Carbohydrates:66.5 % Ash:5.7 % Calcium:0.1 % Phosphorous:.15 % Iron:0.011 % Sodium:0.03 % Potassium:1.4 % Vitamin A:175 I.U./100 g Vitamin B1:0.05 mg/100 g Vitamin B2:0.13 mg/100 g Niacin:1.9 mg/100 g Vitamin C:12.0 mg/100 g Calorific value:380 calories/100 g. Ginger Oleoresin is obtained by extraction of powdered dried ginger with suitable solvents like alcohol, acetone etc. Unlike volatile oil, it contains both the volatile oil and the non-volatile pungent principles for which ginger is so highly esteemed. Concentration of the acetone extract under vacuum and on complete removal of even traces of the solvent used, yields the so called oleoresin of ginger. Ginger oleoresin is manufactured on a commercial scale in India and abroad and is in great demand by the various food industries.
Supplier: Guar gum powder, fresh fruits like apple, mango, banana, lemon, sweet lime, orange, pomegranate and fresh vegetables like fresh onion, g4 chilly.
TASTE-4-ALL SPICY UMAMI FLAVOR (Known under the popular name: SPICY UMAMI) SPICY UMAMI is a natural powder flavor made from various herbs and spices combined with natural yeast extract. Clean label, so no E numbers, no artificial color, no preservatives, no anti-caking, no artificial anything! Halal and Kosher certified. A real Taste-4-All product, applicable in numerous food products. Examples: Sausages, Soups, Pastas, Nuggets, Chicken (Wings), Dressings, Seasonings, Canned Meat/Fish, Vegan Products, Canned Vegetables, Savory bakery products, Chips, Meat products etc. Simple to experience the taste: dissolve a teaspoon of SPICY UMAMI in a glass of hot water and taste. Use: SPICY UMAMI can be used in a very low dosage as taste supporter, like in canned vegetables. Or as a main taste giver in a much higher dosage in for instance sausages. Dosage: experimental depending on taste. Note: Keep packaging closed when not in use.
FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47
1. Oil flavor is suitable for hard candy, biscuit and other baked goods, the general dosage is about 0.2%.But the oil essence that USES propylene glycol as solvent also can be used for soft drink, beverage, general dosage is 0.05-0.1%. 2. Water flavor is suitable for soft drink, beverage, ice cream, other cold drinks, wine and so on, the general dosage is 0.07-0.15%. 3. Emulsifying flavor is suitable for soft drink and beverage, the general dosage is about 0.1%;The dosage of turbidity agent is 0.08-0.12%. 4. Pulp flavor is suitable for the preparation of soda and beverage base material, also can be directly used for soda and beverage, the general dosage is 0.2-0.23% (full color), 0.05% (partial color, add caramel color 0.15-0.18%). 5. Alcohol flavor dosage is generally 0.04-0.1%, tea with flavor, dosage is about 1%.The amount of powder flavor used for feed is generally 0., and the flavor of feed (used for additives) (5%-10%).
