UV Treated Non Woven Fabric made from polypropylene an economical and environment friendly polymer, by spinning the material into fine filaments and bonding them by heat without use of any binders.
It is very light generally 17 to 20 GSM and therefore very economical. The fabric has specialized UV absorbers incorporated in it which ensures protection against the Sun's rays.
About Meltblown Nonwove
Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties
Application of spun-bond nonwoven fabrics:
Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc
Product Tech SMS Medical Nonwoven Fabric
Composition 100% PP
Weight Range 10gsm-100gsm
Workable Width Between 100 and 3,100mm
Roll Diameter Between 800 and 1,500 mm
Core Dia 76 mm
Color Option White
Applications Home / Office / Public institution / Toilet / Hotel / Amusement building / Beauty parlor / Beauty Salon / Studio / Restaurant / Factory / Hospital
Feature 1. Low-linting
2. Various embossed pattern keeps it from leaving any dirt or fiber lint behind
3. Excellent wet and dry strength
4. Highly absorbent and quick drying
5. Hygienic - Cleans without scattering dust particles
6. Solvent-resistant
7. No binders,chemicals or adhesives
8. Both sides of the non-woven fabric sheet can be used
Packaging Shrink PE Film and Cardboard on Both Side.
40HQ can load around 8.5 ton,
20GP can load around 3.5 ton
Certifications ISO9001:2000, GMPC, SGS
Production Lead 20-40 days after receiving the deposit and confirming the samples
Payment Terms 30%T/T Deposit, Balance Against B/L Copy
OEM Service Yes
Non Woven Free Size Disposable Shoe It Keeps Both Contamination From Shoes And Contaminated Shoes From Spreading The Disease. Put On Your Shoe Covers, Make Sure That All Areas Of The Foot And Shoe Are Covered. Try Not To Touch The Floor Or Other Areas With Your Hands While Putting The Shoes Covers On
