Sunlight Sales Corporation

Colorful Steel Pipe Fitting

Product name: pert pipe and fittings. Product Introduce: Polyethylene of raised temperature resistance pipes for floor radiant heating is use ethylene and octene copolymer to produce, Have With super moisture resistant, durable resistance to static strength and good impact strength. Product Application: 1, Radiant floor heating system 2, Construction of hot and cold water supply, Piping drinking water system. 3, Food industry in the beverage, wine, milk and other liquid pipelines. Specification size: Outer diameter: 16-32mm Wall thickness: 2.0-4.4mm Nominal pressure: 1.25Mpa, 1.6Mpa, 2.0Mpa.

Sprinkler irrigation is the irrigation system in which water required by the plant is sprayed like rain under the defined pressure. Water is transferred to sprinklers. Individual sprinkler system consists of the water source, pump, main pipeline, vertical pipeline, and sprinklers. Sanbor Sprinkler Irrigation Pipes which are produced according to TS EN 12201-2 quality standard is made of high-density polyethylene (HDPE) and produced with 50-160 mm diameters and 5-6 meter length. Operating pressure is 6 atmospheres. The montage of SANBOR Sprinkler Irrigation Pipes is easy. They can be combined when the plastic seals and the clips at two sides are combined. Advantages Since there is no water loss in the system, water is used in the maximum level in the places where irrigation water is low (3.5 lt/sec). It can provide irrigation without erosion in slopped lands. Since the water is given to the soil with the rain effect, 20%-50% increase is observed in corp yield compared to other irrigation methods and quality is high. -During seed germination, the inability of the plant to reach above ground due to the layer created on the soil is prevented. Ideal irrigation system in the soils with low depth and (shallow) permeable soils. At the places closer to the sea, salt particles left by the sea water carried by wind, dust and insects can be washed via rain. Since there is the opportunity to control water via sprinkler irrigation, it is the best irrigation method at the places whose groundwater level (drainage) is high. Since there is no need for field ditches, planting area increases and agricultural works can easily be operated. Vegetables, citrus, vineyards and other orchards can be protected from frost and heat. Dissoluble fertilizers can be applied to vegetables with the irrigation water without extra work Areas of Usage It is used in the irrigation of slopped lands, wine yards, and gardens, vegetable, citrus and other orchards. Things to take into account While carrying, it should not be lifted and thrown. Clamps and clips can be broken. It can stay under solar rays and be used in the fields during summer. No problem is observed. Pipes should be stored at the possible temperatures between +5°C and +45°C. Before using the seals for pipe connection, seal recesses should be cleaned. The seal should be completely placed. High pressure created in motor pump outlets cause the removal of seals in the pipes. Pressure should be kept under control with a manometer. The promised pressure values on our pipes are under our warranty. In case of higher pressure levels than the indicated ones, the possible problems that can be created are not covered by the warranty

PE PPR pipe fittings ball valve gate valve PPR Plastic Items Detailed Selling Lead Description: 1) Products brand name 2) Main type of cooperation: looking for agents and can provide OEM process for th big clients all over the word 3) Product standards: Din8077-8078 4) Product pressure grade: PN25MPa 5) Production temperature: - 40 - + 95 C 6) Product colors: green, white, gray, or any colors required by clients 7) Product dimensions: 20 - 160mm 8) Applications: a) Potable water pipe networks for cold and warm water installations of residential buildings, hospitals, hotels, schools, office buildings and shipbuilding b) Pipe networks for rainwater utilization systems c) Pipe networks for compressed air plants d) Pipe networks for swimming pool facilities e) Pipe networks for solar plants f) Pipe networks in agriculture and horticulture g) Heating pipes for residential housing h) Pipe networks for industry, transport of aggressive fluids (acid, alkali) i) Transport of liquid foods 9) We can provide OEM processing for large clients in their own famous brand names

Color black Connection: can be butt fusion, socket fusion, electro fusion . Tech: mold injected. Size: from dn25-dn1000 Feature: undergound , buried products. Exporting standard carton

PE Geothermal Pipe Geothermal pipe transfers heat from the ground into a building to provide space heating and to pre-heat domestic hot water. Geothermal exchange is a clean energy method of heating and cooling commercial and residential buildings. The technology is proven and has been in use for decades. In simplest terms, PE pipe is buried in the ground, allowing energy transfer between the fluid in the pipe and the earth. The fluid in the piping is warmed in the winter and cooled in the summer. The system consists of buried PE pipe, a heat pump, and air distribution system. Product features of PE Geothermal Pipe : 1, Tubing chemical performance is stable, corrosion resistance, offset the insufficiency of metal pipes in this aspect. 2, Easy to bend or hot melt to be a more solid shape, and has good compression ability connect with pipes, not easy to leak. 3, Save investment - the initial investment is large, but low operating cost, the investment capital could be recovered in short term. . 4, Underground heat exchange tube use high-density polyethylene pipe. Service life for 50 years. 5, Environmental protection and energy saving: the use of electricity, no combustion process, as to the surrounding environment, taintless discharge; Need not use cooling towers, have no outside hang, do not discharge heat to the surrounding environment , No thermal conductivity effect, no noise; Do not extract groundwater , without destroying the groundwater resources; Operating cost only 40 ~ 60%for the traditional central air conditioning . 6, A tractor serves 3 purposes: heating in the winter, refrigerating in the summer and providing water annual year. It is 2-4 times as to spilt-type and window air-conditioner . Controlled by computer, and stable performance, It can be controlled by phone, going to temperature and humidity control and fresh air distribution. Advantages of PE Geothermal Pipe: 1.Lower energy costs and environment impact - a geothermal system uses 25-50% less electricity than conventional forced air heating or cooling systems. This means the less energy needed from burning fossil fuels that are harmful to the environment. 2.Free or Cheap Hot Water - unlike any other heating and cooling system, a geothermal heat pump can provide free hot water using a device called a "desuperheater". 3.Year-Round Comfort - maintains an even temperature and humidity level throughout your home with very little noise. 4.Design Flexibility - geothermal heat pump systems allow for design flexibility and can be installed in both new and retrofit situations. 5.Improved Aesthetics - geothermal systems are easy to conceal, don't require cooling towers, eliminate conventional rooftop equipment, less potential for leaks and ongoing maintenance, better roof warranties, allowing architects and building owners to plan for more aesthetically pleasing architectural designs and roof lines. 6.Low Maintenance - since workhorse part of the system - the piping - is underground or underwater, there is little maintenance required. 7.Zone Heating and Cooling - different areas of the building can be heated or cooled to different temperatures simultaneously, i.e., the heat from computer rooms can be moved to the perimeter walls for winter heating in commercial buildings. 8.Durability - with virtually no moving parts, and parts that are sheltered inside a building, a geothermal heating system is durable and highly reliable. Our piping has a life span expectancy of up to 50 years or more. Applications of Geothermal Pipe: Geothermal heating systems are a viable alternative anywhere there is a need for heat or cooling. Using the ground or pond as a heat sink in the summer and a heat source in the winter, heat is transferred from the ground in the winter and extracted from the building in the summer. Because of their design flexibility, they can be installed in both new and retrofit situations. Because the hardware requires less space than that needed by conventional HVAC systems, the equipment rooms can be greatly scaled down in size, freeing space for productive use. And since they usually use the existing ductwork in the building there is no need for any extensive renovations. This makes geothermal heating perfect for historical buildings, greenhouses, resorts and any high-energy user with long operating hours.