Soda ash dense is the grade preferred for glass manufacture because its granular properties make it widely dust-free and reduce the risks of segregation during transport and handling. Sodium carbonate (Na2CO3) is used in the glass and silicate industries and also in metallurgy for its sodium oxide content (Na2O) and for its properties as a flux. It is also widely used as an alkaline reagent for the neutralization of acids and mineral or organic acid salts. Usage: Mainly used in the glass manufacturing and crystal production industries as a melting aid. Packing: 50kg bags, 1200kg jumbo bags. Item Specifications Sodium Carbonate (Na2Co3) %: Min 99.2 Chloride in terms of (NACL) %: Max 0.4 Iron (Fe+2) %: Max 0.004 Insoluble in water %: Max 0.1 Bulk Density, gr/cm3: 0.85 1.1 Na2o %: Max 58 Particle Size 180UM Sieve Remaining: 70% Min
True specific gravity 2.533 (20�°C), bulk density 0.90min. Easily soluble in water, Maximum solubility at 35.4�°C. The aqueous solution appears strong alkalinity. On exposure to air it easily absorbs moisture, carbon dioxide, and gradually forms sodium bicarbonate (caking soda). Usage: 1.The manufacture of glass is one of the most important uses of sodium carbonate. When it is combined with silica (SiO2) and calcium carbonate (CaCO3) and heated to very high temperatures, then cooled very rapidly, glass is produced. This type of glass is known as soda lime glass. 2. Soda ash also is used to clean the air and soften water. 3. Manufacture of Caustic Soda and dyestuffs 4. metallurgy (processing of steel and extraction of iron etc), 5. (flat glass, sanitary pottery) 6. national defense (TNT manufacturing, 60% gelatin-type dynamite ) and some other aspects, such as rock oil refining, paper manufacturing, paint, salt refining, softening of hard water, soap, medicine , food and so on.
Eltee DMCC is the top leading suppliers of Soda Ash Dense in the world. We supply Soda Ash Dense to all the major galss manufacturers of the world. Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material. Properties of Soda Ash Dense : * Chemical Formula: Na2CO3 * Molecular Weight : 105.99 * Absolute Density, g/cm3@25 degree C : 2.533 * Melting Point , degree centigrade: 851 * Solubility, max % @35.4 degree centigrade: 33.2 * pH of 1% solution @25 degree centigrade: 11.34 Physical Properties: * Sodium Carbonate (Na2Co3)% : 99.5% Min * Bulk Density : Ib./ft3 : 62.4 - 68.6 * GPL : 1000 - 1100 Chemical Properties: * NaCl Weight % : 0.04% Max * Si02% : 0.03 Max * Organic Matter as C% : 0.01% Max Product Usage : * Glass Industries * Chemical Intermediates * Soap and Detergent formulations * Water Treatment * Flue Gas Desulfurization * Pulp and paper
Eltee DMCC is the top leading suppliers of Soda Ash Dense Sachi Brand in the world. We supply Soda Ash Dense Sachi Brand to India, Bangladesh, China, Indonesia , Brazil, Egypt, Georgia, Japan, Jordan, Lithuania, Kenya, Malaysia, Nigeria, South Korea, Spain, United Arabian Emirates, Uganda, Thailand, Tanzania, Vietnam etc . Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material. Properties of Soda Ash Dense : * Chemical Formula: Na2CO3 * Molecular Weight : 105.99 * Absolute Density, g/cm3@25 degree C : 2.533 * Melting Point , degree centigrade: 851 * Solubility, max % @35.4 degree centigrade: 33.2 * pH of 1% solution @25 degree centigrade: 11.34 Physical Properties: * Sodium Carbonate (Na2Co3)% : 99.5% Min * Bulk Density : Ib./ft3 : 62.4 - 68.6 * GPL : 1000 - 1100 Chemical Properties: * NaCl Weight % : 0.04% Max * Si02% : 0.03 Max * Organic Matter as C% : 0.01% Max Product Usage : * Glass Industries * Chemical Intermediates * Soap and Detergent formulations * Water Treatment * Flue Gas Desulfurization * Pulp and paper
Eltee DMCC is the Largest Exporters of Soda Ash Dense Sachi Brand in the world. We supply Soda Ash Dense Sachi Brand to Bangladesh in very Large Quantities. Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material. Properties of Soda Ash Dense : * Chemical Formula: Na2CO3 * Molecular Weight : 105.99 * Absolute Density, g/cm3@25 degree C : 2.533 * Melting Point , degree centigrade: 851 * Solubility, max % @35.4 degree centigrade: 33.2 * pH of 1% solution @25 degree centigrade: 11.34 Chemical Specifications : * Alkalinity (as Na2Co3)% : 99.2% Min * Chloride in terms of NaCL : 0.4% Max * Iron Content: 0.002% Max * Insolubility in water : 0.1 % Max * Na02% (if its need): 58% Min Physical Specification: * Bulk Density (Dense), gr/cm3 : 0.85 - 1.1 Appearance : (Mesh Size) * Below 20 : 10% Max * 20~30 : 25% Max * 30~100 : 60% Min * 100~140 : 7% Max * 140 above : 3% Max Product Usage : * Soda Ash Dense is widely used Glass Industries * Soda Ash Dense is used as Chemical Intermediates * Soda Ash Dense is used for Water Treatment. * Soda Ash Dense is used for Flue Gas Desulfurization * Soda Ash Dense has wide usage in Pulp and paper industry.
Eltee DMCC is the Top Leading Exporters and International Suppliers of High Quality Soda Ash Dense in world. We supply Soda Ash Dense of high quality to more than 40 countries of world such as India, Japan, South Korea, Vietnam, Kenya, Australia, Egypt, Ghana , Uganda, Tanzania, Belgium, Botswana, Chile, Czech Republic, Ecuador, Guyana, Indonesia, Kuwait, Saudi Arabia, Oman, Morocco, Norway, Philippines, Rwanda, Senegal, South Africa, Tunisia, Zambia, Poland, Mexico etc. Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material. Properties of Soda Ash Dense : * Chemical Formula: Na2CO3 * Molecular Weight : 105.99 * Absolute Density, g/cm3@25 degree C : 2.533 * Melting Point , degree centigrade: 851 * Solubility, max % @35.4 degree centigrade: 33.2 * pH of 1% solution @25 degree centigrade: 11.34 Chemical Specifications : * Alkalinity (as Na2Co3)% : 99.2% Min * Chloride in terms of NaCL : 0.4% Max * Iron Content: 0.002% Max * Insolubility in water : 0.1 % Max * Na02% (if its need): 58% Min Physical Specification: * Bulk Density (Dense), gr/cm3 : 0.85 - 1.1 Appearance : (Mesh Size) * Below 20 : 10% Max * 20~30 : 25% Max * 30~100 : 60% Min * 100~140 : 7% Max * 140 above : 3% Max Product Usage : * Soda Ash Dense is widely used Glass Industries * Soda Ash Dense is used as Chemical Intermediates * Soda Ash Dense is used for Water Treatment. * Soda Ash Dense is used for Flue Gas Desulfurization * Soda Ash Dense has wide usage in Pulp and paper industry.
Commodity : Soda Ash Light / Dense Molecular formula:na2co3 Molecule weight:105.99 H.S Code:28362000 Cas: 497-19-8 Properties : white crystal powder, easily soluble in water, water solution is alkali. Easily absorbing moisture and co2 if exposing in the air. Applications: mainly used in glass-manufacturing, chemical industry, metallurgy, paper, dye, synthetic washes and petrochemistry. Packing :25kg/ 40kg/50kg/750kg pp woven bag with waterproof pe inner , two layers Specifications standard : gb210.1-2004 Items : specification First grade : specification Second grade Total alkalinity(as na2co3 in dry base) %99.2% min98.8% min Chloride content(as nacl) %0.7% max0.9% max Iron content(as fe in dry base) /%0.003% max0.0035% max Sulphate content(as so4 in dry base) /%0.03% max0.03% max Water insoluble matter /%0.03% max0.03% max Loss on ignition a/ %0.5% max0.5% max
Soda Ash Light is one of the most important basic industrial chemicals and the most widely used fixed alkali for the manufacture of other Alkali Products. It is used in the manufacturing of Detergents, Sodium silicates, Bicarbonates, bichromates, Pulp & Paper, cellulose, rayon, iron and steel, aluminum, cleaning compounds, water-softening chemicals, textiles and dyestuffs, drugs, and many other materials.
Eltee DMCC is renowned Exporters and Suppliers of Soda Ash Dense Sachi Brand in the world. We supply Soda Ash Dense Sachi Brand to several countries of world such as India, China, Bangladesh, South Africa, Kenya, Nigeria, Denmark, Qatar, Saudi Arabia, Peru, Philippines, Panama, Oman, Morocco, Malaysia, Laos, Vietnam , Indonesia, Greece, Ecuador, Egypt, Bulgaria, Australia, Chile etc. Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material. Properties of Soda Ash Dense : * Chemical Formula: Na2CO3 * Molecular Weight : 105.99 * Absolute Density, g/cm3@25 degree C : 2.533 * Melting Point , degree centigrade: 851 * Solubility, max % @35.4 degree centigrade: 33.2 * pH of 1% solution @25 degree centigrade: 11.34 Physical Properties: * Sodium Carbonate (Na2Co3)% : 99.5% Min * Bulk Density : Ib./ft3 : 62.4 - 68.6 * GPL : 1000 - 1100 Chemical Properties: * NaCl Weight % : 0.04% Max * Si02% : 0.03 Max * Organic Matter as C% : 0.01% Max Product Usage : * Glass Industries * Chemical Intermediates * Soap and Detergent formulations * Water Treatment * Flue Gas Desulfurization * Pulp and paper
