Payment Terms:
100 % by irrevocable L/C as per IDECO payment terms
Destination:
Aqaba Port, Jordan
Looking for suppliers from:
Worldwide
Product Description
Please provide a quotation to the following requirement from the importer -
Product Name: Stay Rods
Specifications:
- Stay Rod 65 K.N complete with thimble and plate., QTY = 12000 Sets
- Stay Rod 130 K.N complete with thimble and plate., QTY = 1000 Sets
Quantity Required : 13000 Set/Sets(sample)
Shipping Terms : CFR
Destination Port : Aqaba Port, Jordan
Payment Terms : 100 % by irrevocable L/C as per IDECO payment terms
Specifications:
stranded steel wires
Stay wires shall be stranded steel wires, manufactured to BS 183, galvanized to BSI BS EN ISO 1461 with a minimum mean coating thickness of 2.83µm, or related IEC or other standards.
With a minimum breaking load of 60 K Newton. Stay wires shall be high tensile hot-dip galvanized with a diameter of 12mm (4mmx7). They shall be easy to bend and erect (not hard).
The outermost layer of stay wire shall be stranded with the right-hand lay.
All Stay wires shall be supplied on robust drums of approved materials and construction suitable to withstand
very rough transport and handling and to enable conductors or cables to be pulled out smoothly.
Drums shall be non-returnable and, if made from timber, shall be pressure–impregnated against fungal and insect attacks.
Wooden drums shall be lagged with closely fitting battens in accordance with standards as may be approved.
Battens shall be firmly secured to the drum flanges and finally, steel banded under tension close to each flange
using steel tape not less than 25 mm wide and 2mm thick and stapled to at least every third batten.
Drum spindle holes shall be reinforced by steel plates.
INSPECTION AND TESTING
• Test at Manufacturer’s Works.
• Galvanizing- Test.
Stay wire supplied shall be easily cut by a hacksaw and easily bent through 180 by hand since bulldog clamps are to be used for fixing stay wires after bending
Payment Terms:
100 % by irrevocable L/C as per IDECO payment terms
Destination:
Aqaba Port, Jordan
Looking for suppliers from:
Worldwide
Product Description
The buyer is interested to receive quotations for the following RFQ -
Product Name: Stay Wires
Specifications:
- 65 kN Stay Wires lengths on each drum shall be 200 Meters and all drums shall contain only one length
- 130 kN Stay Wires lengths on each drum shall be 100 Meters and all drums shall contain only one length
Quantity Required: Rated 65kN, 7/4mm, Stay Wire, suitable for OHL Network installations. With the ability of binding 180o by hand, QTY = 85 KM
Rated 130kN, 19/3.55mm, Stay Wire, suitable for OHL Network installations. With the ability to be bent 180o by hand, QTY = 30 KM
The buyer is interested to receive quotations for the following RFQ -
Product Name: Steel Wire Rods
Specifications:
1) MS HR Coil Gr. S355 JR, Silicone 0.02 Max. Size. 1100 X 4mm - 250 Ton Size. 1500 X 4mm - 250 Ton Be Ensure That: Silicone 0.02 Max
2) MS Wire Rod (Cold Drawn) 6mm - 10,000 Ton (SAE 1008 / 1010 / 101 MS Wire Rod (Cold Drawn ) 6mm (To Be Comply With Above & Any One Standards)
