Our Official Website anywherepowder.com Product Overview Anhydrous transparent filler (powder material) is a new type of inorganic nonmetallic powder developed by ANYWHERE POWDER research team for transparent materials. The powder is made from natural aluminosilicate glasses processed by strict screening, cleaning, grinding, flotation, purifying, modifying and special drying, etc. It is a new environmentally friendly powder material which does not contain crystalline water, high hardness, low oil absorption, ultra-fine, even particle, good stability, easy dispersion, good fluidity, high whiteness, acid and alkali resistance. The anhydrous transparent filler, after special modification and dehydration, is compatible with most resins and has high transparency, and can improve the wear resistance, scratch resistance and weather resistance of the product, etc. Therefore, it has been widely used in a variety of products. Product Features High Filling Low oil absorption. Good dispersion. Smooth. No need for secondary grinding. The addition amount is 2~5 times of the ordinary filler. High Transparency Only one component. Pure color. Absorb part of blue light. The light transmittance is 2~3 times of the ordinary filler. Performance Improvement Without water of crystallization. Improving the hardness and scratch resistance. Acid, alkali and UV resistance. Safe and Environmentally Friendly Passed RoHS six tests of European Union. Domestic and foreign environmental safety standards met. Good compatibility Compatible with different resins. Wide range of applications. Stable chemical properties. Does not affect the performance of other auxiliaries. Applications Rubber Printing Pure color. Good transparency. Stable. Low oil absorption. Free of heavy metals. Transparent Marble Adhesive Pure color. Good transparency and light transmission. Low oil absorption. Acid and alkali corrosion resistant. Powder Coating Matte transparent filler is used in the export of high-grade matte powder coatings. Transparent Resin Low oil absorption. Good transparency. Pure color. Low bulk density. Fine particle. Calendered PVC Film For easy opening and printing. Transparent Roof Tile Reduce production cost. Good light transmittance. Improving wear scratch resistance.
Product Overview Synonyms: Pure Crystalline Silica Powder, Quartz Nanopowder, SiO2 Nanoparticles, Silicic oxide?Micropowder, We also produce Precipitated Silica(White Carbon Black). Chemical Formula: SiO2 CAS Number: 7631-86-9 EINECS Number: 231-545-4 Silicon powder is a non-toxic, tasteless, non-polluting non-metallic mineral powder, made from natural quartz or fused quartz by crushing, ball milling (or vibrating, air milling), flotation, acid pickling purification, high-purity water treatment and other processing. It has the characteristics of high hardness, low oil absorption, easy to disperse, not easy to precipitate, strong stability, acid corrosion resistant, and so on. Therefore, it is widely used in chemicals, electronics, integrated circuit (IC), electrical appliances, plastics, coatings, advanced paints, rubber, national defense and other fields. With the rapid development of high-tech field, Silicon dioxide micropowder will also enter a new period of historical development.
We offer a wide plethora of Zinc in many forms including LME registered and non registered Special High Grade Ingots and Jumbos, cathodes, dust, foil, granules, powder, pieces, anodize activated powder, shot, and a mossy form. Zinc is a bluish-white, lustrous metal. It is brittle at ambient temperatures but is malleable at 100 to 150°C. It is a reasonable conductor of electricity, and burns in air at high red heat with evolution of white clouds of the oxide. Plating thin layers of zinc on to iron or steel is known as galvanizing and helps to protect the iron from corrosion.
We are able to supply Tin in many forms including LME registered and non registered, ingots, slabs, bars, foil, granules, powder, anodized activated powder, shot, wire, sticks, ingots, and “mossy tin”. Tin is a silvery-white metal, is malleable, somewhat ductile, and has a highly crystalline structure. The element has two colours, with a cubic structure which changes at allotropic forms. On warming it is grey, the ordinary form of the metal. When Tin is cooled below 13.2°C, it changes slowly from white to grey or tetragonal structure. This change is affected by impurities such as Aluminium and Zinc, and can be prevented by small additions of Antimony or Bismuth.
We put forward a high quality of assortment of Nickel which is available in many forms including LME registered and non registered cathodes, cut cathodes, briquettes, pellets, disks, shots, granules, foil, powder, flakes, sheet, wire, mesh, spheres, “evaporation slugs”, and rods. Nickel is a silvery white metal that takes on a high polish. It is hard, malleable, ductile, somewhat ferromagnetic, and a fair conductor of heat and electricity
We are engaged in making Lead available in several forms including LME registered and non registered 99.97% and 99.99% as well as secondary ingots, foil, granules, powder, rod, shot, sheet, and wire. Lead is a bluish-white lustrous metal. It is very soft, highly malleable, ductile, and a relatively poor conductor of electricity. It is very resistant to corrosion but tarnishes upon exposure to air. Alloys include pewter and solder.
We hold immense expertise in making available Copper in many forms including LME registered and non registered cathodes, billets, rods, cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire, insulated wire, mesh and “evaporation slugs”. Copper is one of the most important metals. Copper is reddish with a bright metallic lustre. It is malleable, ductile, and a good conductor of heat and electricity (second only to silver in electrical conductivity). Its alloys, brass and bronze, are very important. Monel and gun metals also contain copper. The most important compounds are the oxide and the sulphate, (blue vitriol
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
Dep=di-2
