Opticombine Industrial Ethernet Switch, 1 x 10/100/1000M Base A network switch is networking hardware that connects devices on a computer network by using packet switching to receive and forward data to the destination device. Feature 1. High quality optoelectronic modules provide good optical and electrical characteristics. 2. Ensures reliable data transmission and long working life. 3. Supports full duplex or half duplex mode with automatic negotiation capability. 4. Automatic cross recognition of network port support. 5. In line with carrier level operation standard, the average fault free operation is more than 50 thousand hours. 6. Working power supply: DC 10-52V provides anti connection protection. 7. Uses SC optical fiber interface (optional ST, FC, SFP interface) 8. Lightning surge protection (power):5000A (8/20 s)
Industrial ethernet switch 1* 100Mbps Fiber and 4* 1000Mbps RJ45 ports Power redundant FCC, UK CA, ISO9001, CE certifications Fast despatch Inquiry now!
The M160T Ethernet Remote I/O module provides 8 optical-isolated digital inputs, supports max. 10Mhz high speed pulse counter, 8 isolated 12bits analog inputs, supports 0~5V,0~10V,4~20mA,0~20mA analog signal, 8 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs. All of the I/O with high sampling frequency and special filtering strategy to ensure itâ??s reliable. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system. 1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog; 2. Power supply 12~36VDC with over voltage and phase-reversal protection; 3. Supports TCP Server, TCP Client, Modbus TCP, MQTT Protocols; 4. DO1 support PWM output; 5. Management and configuration via LAN connection configuration software for easy operation and maintenance; 6. 8 optical isolated digital input, supports max. 700khz high speed pulse counter; 7. 8 digital output or relay output, supports 10Hz~300KHz high speed pulse output; 8. 8 isolated analog input, 12-bit resolution, supports 0~20mA,4~20mA,0-5VDC, 0-10VDC; 9. High sampling frequency and special filtering strategy to ensure reliability; 10.1 RS485 Serial port, supports Modbus RTU Master or Slave, can extend I/O modules; 11.Supports register mapping function and extend I/O inquiry strategy; 12.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost; 13.LED instructions work status, with reset button to reset, easy on-site installation and commissioning; 14.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field; 13.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.
1. With 4x10/100/1000BaseT(X) ports, and 2x1000BaseX SFP slots 2. Redundant dual 12/24/48 VDC power inputs, Built-in over-current protection, Reverse connection protection 3. -40 to 75C operating temperature range (WT models) 4. No fan, low consumption, industrial design standard, industrial grade electronic components, environmental protection & lead-free production 5. Hard aluminum alloy case (Not sheet metal), DIN-rail and wall mounting 6. IP Rating up to IP40 7. No packet lost in 72 hours full load traffic testing
1. With 8x10/100/1000BaseT(X) ports, and 1x1000BaseX SFP slot 2. Redundant dual 12/24/48 VDC power inputs, Built-in over-current protection, Reverse connection protection 3. -40 to 75C operating temperature range (WT models) 4. No fan, low consumption, industrial design standard, industrial grade electronic components, environmental protection & lead-free production 5. Hard aluminum alloy case (Not sheet metal), DIN-rail and wall mounting 6. IP Rating up to IP40 7. No packet lost in 72 hours full load traffic testing
8 ports 10/100 base rj45, DC 9V-56V dual power supply Industrial level, layer 2
OPC UA I/O Controller BL200UA is a new type of I/O system that special designed for Industrial 4.0, it supports OPC UA Protocol, built-in programmable logic control, edge computing. it suitable for IIoT Application and Industrial Automation. The EdgeIO I/O Controller BL200 includes lots of advantages to ensure its suitable for Industrial Automation and IIOT Applications. EdgeIO BL200 supports Scalable Networking, can connect one by one to save wiring costs. The EdgeIO BL200 suitable for IIOT Applications, built-in Cloud Drivers, the users can click then connect to cloud platforms. The EdgeIO BL200 supports Cyber Security and Data Security, provides VPN, SNMP, TLS, SSL, etc. The EdgeIO BL200 can be used as a simply PLC, connect IT and OT directly, easy to create the IIOT Solutions. Saving wires and wiring cost, make it more easier and cost-effective to you industrial applications.
***LNP-0800-T/ 8-Port Industrial PoE+ Unmanaged Ethernet Switch, w/8*10/100Tx (30W/Port); EOT: -40~75C***| Network broadcast storm protection | 8-Port IEEE 802.3at compliant PoE+ Function with 30W/Port | Supports Auto MDI/MDI-X Function | Store-and-Forward Switching Architecture | 2K MAC Address Table | Surge Protection: 2,000 VDC support | ESD Protection: 6,000 VDC support | Redundant Power Input Design – 48~55VDC | Built-in 1 relay output for Port Break Alarm | IP30 Rugged Aluminum Case Design | DIN-Rail and Wall Mount support | Operating Temperature range - STD: -10° to 70° C, EOT: -40° to 75° C | 5-Year Warranty |
The Cellular IoT RTU is an industrial class, high reliability, high stability, and programmable Remote Terminal Unit (RTU). It embedded 32-Bit High Performance Microprocessor MCU, inbuilt industrial Cellular module. It provides 8 digital inputs, 6 analog(ultra high 24 bit resolution) or PT100 Resistance Temperature Detector (RTD) inputs, 4 relay outputs, 1 ambient sensor input for monitoring onsite temperature and humidity, 1 Ethernet RJ45 port for connect internet WAN or LAN, supports dual nano sim card, with 2 RS485 serial port, supports 224 mapping registers via Modbus RTU protocol. It can monitoring and operates the I/O ports by SMS, APP, Web Server, internet, timers and programmed inter-lock events automatically.
