MB Holding

Bolted Steel Leachate Storage Tanks Introduction Bolted Steel Leachate Storage Tanks are designed to store leachate, which is the water is being extracted from the site. Leachate is highly corrosive depending on the variability of the composition, and need tanks and containers with excellent corrosion resistance to store it. When the composition and toxicity of leachate vary from one landfill to another landfill, one can not be too careful when storing such a volatile substance. If not properly supervised or contained, leachate can seep through the water table and into the groundwater. There are only a few tanks that have abilities to store landfill leachate, which with the variability in composition. When a project comes with leachate storage tanks, the landfill operators first option is Center Enamels glass fused to steel leachate storage tanks. Center Enamel Co., Ltd is a manufacturer dedicated to enameled products since 1989. We have more than 30 years of experience in Glass-Fused-to-Steel leachate storage tanks design, manufacture, and installation. We are the largest and the most professional glass-fused - to -steel bolted tank supplier in China. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India, and South Africa, etc. The superior product quality and prompt service gain us worldwide recognition. Our company has the most advanced production line and already passed the ISO9001 - 2008 quality system certificate. Center Enamel Tanks are produced and designed confirming to AWWA D103 - 09, OSHA and can meet European standards. The center Enamel is a unique enterprise that can produce an AA grade enamel sheet now. The company owns a professional R&D department with more than 30 person laboratory, and possess independent enamel formula research ability. According to customers' different operating requirements, we can customize various products.

In order to prevent the damage of sludge to the environment, we need to use the sludge storage tank for sludge storage and treatment. Sludge mainly comes from sewage treatment, high organic content, perishable, smelly. Sludge including activated sludge, humus sludge, concentrated sludge, are corrosive. Glass fused to steel tank is the best choice for sludge storage. It combines the strength of steel with the excellent chemical and physical corrosion resistance of glass, with a service life of over 30 years and low maintenance requirement. Center Enamel is a well established, world-leading storage tanks manufacturer in China. What is a glass fused steel tank? Glass fused to steel tanks are assembled from glass plates and secured with self-locking bolts. Then apply sealant to the joint clearance and bolt position to improve the air tightness of the tank. Easy to install, no large installation equipment and/or highly skilled workers are required, and can also be dismantled, moved and relocated. Center Enamel was founded in 1989, with 30 years of experience in the production of enamel products, it is not only the first manufacturer to produce glass fused steel cans in China, but also the most professional manufacturer of GFS cans in Asia. Our glass fuse to steel cans have been exported to the United States, Australia, Canada, Malaysia, Indonesia, Russia, united Arab emirates, panama, India, South Africa and more than 60 countries.

With the rapid development of global economy, environmental pollution, especially the treatment of municipal sewage, has become a research hotspot in many countries. Urban sewage is the product of urban development. With the development of urbanization and industrialization, its output keeps increasing and pollution becomes increasingly serious, which seriously restricts the sustainable development of urban economy. Center Enamel is a well established, world-leading storage tanks manufacturer in China As the storage tank of municipal sewage treatment, glass fused to steel tank has become the preferred solution of municipal sewage storage in all municipal sewage treatment plants. Why do municipal sewage treatment plants choose glass fused steel tanks? With a service life of over 30 years, glass-fused Steel is two materials, the enamel glaze and the Steel plate surface Fused together after a heat treatment at 850-940 , then creating a tough and inert bond, combining strength with excellent chemical and physical corrosion resistant Steel Glass. Vitrified steel tank is assembled by vitrified steel plate, fixed by self-locking bolt, easy to install, disassemble, move and relocate. Then apply sealant to the joint clearance and bolt position to improve the air tightness of the tank. The color of the tank can also be customized to make the glass melt into steel tank more integrated into the surrounding environment. This is why so many municipal sewage treatment plants choose glass fused to steel tnaks as the urban sewage storage pool. Project References As the most professional GFS tank manufacturer in Asia, we are pleased to receive your email regarding the urban sewage storage problem. Our glass melting steel tank engineers will provide the best urban sewage storage solution for your project.

Stainless Steel Bolted Tanks are the preferred choice for wastewater treatment applications. For the harshest industrial wastewater applications, Stainless Steel is unsurpassed in safety and durability. Stainless steel tanks as wastewater storage tanks have the longest design-life expectancies on the market. As wastewater treatment and AD systems designers, Stainless Steel bolted Tanks are the perfect storage tank solutions. Stainless steeltank is one of the most widely used storage tank solutions and widely used in drinking water storage, food industry, agricultural irrigation, rainwater collection, firefighting water storage, industrial wastewater treatment, bio-energy, leachate storage treatment, municipal sludge storage, grain silos, etc. Stainless steel is a more expensive material than carbon steel, and it is also costly for large stainless steel containers. In this case, however, the price premium is not large and far exceeds the total cost of the necessary protective coating that must be applied (periodically inspected and maintained) to replace the carbon steel tank.stainless-steel does not in general (in wastewater applications) need any corrosion protection coating. This is due to the passive layer provided by the unique chemical properties of stainless steel. Stainless Steel Bolted Wastewater Storage Tanks Advantages: Faster Installation: Compared with the stainless steel welded tanks, through the technical innovation of the installation, the stainless steel bolting tank installation is less affected by weather, and the installation cycle is easy to control, which greatly reduces the cost of construction. High Quality: The stainless steel bolted tank is made of the physical and chemical stable SUS304, SUS316L, SUS444 stainless steel plate, which has superior corrosion resistance, good sealing performance and service life of up to 30 years. Expansion Possibilities: Compared with stainless steel welded tank, stainless steel bolted tanks are easy to assemble, and can often be expanded to meet increased storage requirements.

Advantage: short construction period superior corrosion resistance, service life is more than 30 years low project cost tank volume can be easily expanded beautiful appearance, color can be customized not subject to weather conditions no need big installation equipment easily expand, dismantle, move Application: wastewater treatment plant (wwpt) biogas plant drinking water storage fire water storage grain silos Project reference: 2008 beijing olympic games waste water treatment plant 2013 malaysia palm oil mill effulent (pome) biogas plant Pe layer and wooden box