We can connect you with our friend end sellers/title holders to offer express work with petroleum products of Russian or non-Russian origin, where they can provide reliable and serious offers.
Please contact us only if you are the real end buyer or his direct mandate.
MOQ: 10,000 Barrels per Month
Supply Ability: 1,000,000 Barrels per Month
JP54 Technical Specifications:
ADDITIVES
Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3
COMBUSTION PROPERTIES
Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min max result test ip method ASTM
COMPOSITION
Total acidity mg KOH /g max 0.01 354 D 3242 Aromatic % vol max 22.0 158 D 1318 Sulphur, total % mass max 0.30 107 D 1266/2622 Sulphur mercaptan % mass max 0.003 342 D 3227 Doctor test 30 D 4952
VOLATILITY
Initial boiling point centigrade max report 123 D 96
10% vol at C 240
20% vol at C report
50% vol at C report
80% vol at C report
End point centigrade max 42 170/303 D 56 / 3828 Density at 15 C kg m2 min /max 776/840 180/385 D 1298
LOW TEMPERATURES PROPERTIES
freezing point centigrade max 40 15 D 1298
Corrosion copper (2hrs at 100 C)
Corrosion silver (4 hrs at 500C) max 1 227
STABILITY
Thermal stability control temp. 280C 323
Filter pressure, differential mm. Hg max 25
Tube deposit rating (visual) max <3
CONTAMINATION
Existent gum mg/100 ml max 7 131 D 361 Water reaction, interface rating max 16 258 D 1084 Fuel whit static dissipater additives min 75 D 3648 Fuel without static dissipater additives min 85
We're a UK based company.. We presenting a Genuine SELLER / TITLE HOLDER who can supply Jet A1 Fuel, ULSD Diesel EN590, Unleaded Gasoline and Fuel Oil (CST 180/380) ..... ORIGIN: EUROPEAN .... Price: Platts minus 7% ... The Seller can supply as CIF, STS and Vessel Take Over. The Seller is The OWNER and the TITLE HOLDER ... SBLC MT760 is accepted as a guarantee only as NON-TRANSFERABLE, NON-OPERATIVE and is issued to the SELLER .. We're looking for RWA buyers... MOQ is 50,000 MT for EN590, FUEL OIL, and Gasoline, and 2M bbl for Jet A1 Fuel .... Contact: Usama
Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance.
Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound.
Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives.
Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery.
Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.
Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance.
Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound.
Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives.
Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery.
Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.
The company, acting as a Trade Broker, is looking for Buyers to conclude annual Contracts for the sale of diesel fuel EN 590 10 ppm, produced in Kazakhstan/Oman on terms FOB Port Rotterdam (Netherlands), Port Jurong (Singapore) under the Tank to Tank (TTT) and Tank to Vessel (TTV) procedure. The first batch of 100,000 tons is a trial, after which an annual agreement for the supply of 200,000 - 300,000 tons per month is signed. Payment terms: MT103/TT; Price: $ 540 per ton; Product quality: European Union standard EN 590; Inspection: SGS/equivalent. Contact person: Nick
The company, acting as a Trade Broker, is looking for Buyers to conclude annual Contracts for the sale of diesel fuel EN 590 10 ppm produced in Kazakhstan/Oman on FOB Jurong (Singapore) terms under the Tank to Vessel (TTV) Procedure. The first shipment of 100,000 MT is a trial shipment, followed by the signing of an annual Agreement for the supply of 200,000 - 300,000 MT per month. Payment terms: MT103/TT; Price: $ 540 MT; Product quality: European Union Standard EN 590; Inspection: SGS/equivalent. Contact person: Nick
