WPS3010 Adjustable DC regulated power supply station with output switch and short circuit alarm, WPS3010 30V 10A with 4-Digits LED Power Display and USB quick-charge interface is made for mobile phone power test repair which can be your best choice. Features: Highly Accurate Encoder Adjustment: Just press the voltage or current encoder knob of the DC power supply to switch between each digit, and then turn the knob to set each digit in the range of 0-9, you can directly and accurately set the voltage or current you want. It is more precise and convenient than traditional knobs. Output Switch Control: In the process of using the variable power supply, you can adjust the voltage and current you need by pressing the output button at any time. This design can prevent you from damaging the appliance because you forget to disconnect the output. Effectively improve your experiment efficiency. Automatic Power Calculation: The bench power supply will automatically calculate the power based on the voltage and current, and display the voltage, current and power on the high-definition four-digit digital display. The accuracy is 0.01V, 0.001A. The bright digital display allows you to use the bench power supply in a dim environment. Short Circuit Alarm: When the load equipment fails and short-circuits, the adjustable dc power supply will emit a buzzer alarm. Prevent excessive output current from damaging the load equipment. In addition, it has multiple protections, such as grounding wire, leakage protection, thermal protection, voltage overload, power supply overload, etc. Packaging and After-Sales: 1 x Wanptek DC Power Supply, 1 x Output Power Cord, 1x Input Power Cord, 1 x User Manual. Size is 7.48*3.54*5.90 inches, Weight is 2.46lb. Note: If you have any technical questions about our power supply, please do not hesitate to contact us.
Remote sensing for distantly situated loads for models above 5 amps. Optional facilities : (at extra cost) Over voltage protection (fixed / variable). Input voltage: 115v ac ± 10%. Rack-mounting, wall mounting, base mounting. Ttl compatible active on / off.
SPPS-S Series DC power supply variable with memory, 60V 5A adjustable switching regulated DC bench linear power supply with memory recall and output disables button 4-Digits display and alligator leads for mobile phone repair tool. Features: Easier to Set Values: Encoder switch is used on DC power supply 2021 version to replace the potentiometer switch which is widely used but not easy to adjust. On this version you can just â??setâ?? Voltage and Current instead of â??adjustâ??. Make works accurate, easy and fast. 4 Groups of Internal Memories: You can set 4 groups of commonly used Voltage and Current combination and easily recall them by press â??M1-M4â??. Use the â??ADJUSTâ?? knob to set new combinations. Output Switch Control: Sometimes we need to switch between different voltage or current outputs, but we often forget to unplug the previous instrument and cause it to burn out, which often occurs in the maintenance. Output switch is designed to solve this problem. By pressing the On/Off key, the required voltage and current can be adjusted without the actual output power, which makes this bench-top DC power supply more secure and more energy efficient. Reliability and Safety: Variable power supply uses premium electronic components, provides reliable working status and prolongs the product's life effectively. Many safety measures are adopted in power supply- Grounding wire, Leakage protection, Thermal protection, Voltage overload, Power overload and Short-circuit protection. When the working temperature is more than 122â??/50â??, the intelligent thermal protection will activate the cooling fan to lower the temperature according to the load. Compact and Various Application: This DC power supply is less than 3 lb and measures only 9.9 x 3.3 x 6.7 inches, with a high resolution of 00.01V and 0.001A, led 4 digits display. You can easily tune it within 0-60V and 0-5A, applies for laboratory, school, repair, electrolyzation, electroplate, brush plating, lamp test, aging testing, battery charge, home DIY and other requirements. Note: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing. SPPS-S Series DC Bench Power Supply Input Voltage 230V�±10% 50Hz/115V�±10% 60Hz Input Voltage: 230V�±10% 50Hz/115V�±10% 60Hz Working Temperature: 0 â??-40â??; Relative Humidity: ï¼?80%RH Storage Temperature: -10 â??-70â??; Relative Humidity: ï¼?70%RH Constant Voltage State: Voltage stabilityâ?¤1%�±3mV Load stabilityâ?¤1%�±3mV Ripple noiseâ?¤50mVrms Constant Current State: Current stabilityâ?¤1%�±3mA Load stabilityâ?¤1%�±3mV Ripple noiseâ?¤50mArms Display Accuracy: 1%�±5digits Display Resolution: Voltage: 00.01V / Current: 0.001A Product Dimension: 9.9 x 3.3 x 6.7 inch / 252 x 84 x 170mm Product Weight: 2.64lb / 1.2kg Fuse Standard: 5A (AC 110V Input)
UNI-T UTP3305 Dual channel DC Power Supply 32V 5A Precision Variable FEATURES: Dual channel, two circuits of adjustable output voltage 0~32V and one circuit of fixed voltage 5V. Master-slave tracking, constant voltage and current, I, II circuit can be used for master-slave tracking and used in parallel or in series. Forced ventilation, temperature control cooling system. When the temperature reaches 65, the device dissipates heat automatically. Display mode: LED digital tube display,can show voltage and current simultaneously. Low ripple, low noise. High regulation: 0.01%. Output ON/OFF control. Constant voltage and constant current operation. Optional European standard output terminal. Overload protection, reverse polarity protection. TECHNICAL SPECIFICATIONS: Channels CH1 CH2 CH3 Output Voltage 0~32 V 5 V Fixed Output Current 0~5 A 3 A Max Series Tracking 0~64 V - Parallel Tracking 0~10 A - Load Regulation Voltage 0.01%+3 mV 3%+5mV Current 0.2%+3 mA - Power Regulation Voltage 0.01%+3 mV 5 mV Current 0.1%+3 mA - Noise Voltage 1mVrms 2 mVrms Current 3 mArms - General Characteristics Power Supply Input voltage 220VAC/110VA Frequency 50Hz/60Hz Product Color White+Grey Product Weight About 10.5 kg Product Size (WHD) 260mm 176mm 317mm
P-1505TD 5A Intelligent Switching Regulator DC Power Supply Necessary Power Supply for Mobile Phone Maintenance. P-1505TD Power Supply Features Low Ripple And Noise, High Reliability and High Accuracy. Features: The power supply adopts powerful pure copper wire, which has strong conductivity and long service life. What's more, the power supply is designed with high efficiency and low noise. The item features heat dissipation, strong carrying capacity, and porous heat dissipation design. It comes with a range of 0-5V/0-15V, and the current has a 3A/0.5A range, showing the current more finely. The power supply is smaller than a normal 5A power supply, supporting short circuit protection and over current protection, improving product safety.
Note:there're 110V and 220V,we will according to your country sent the suitable one to you. Features : Single Output, 30V 5A full power to work long hours; Built-in electronic cooling fan, temperaturegt; 45 degrees start cooling, noiseless; digital display, stepless adjustment potentiometer higher accuracy; Small and lightweight, exquisite, easy to carry do not take the work environment; The short-circuit current limit protection, current limit can be set. Packing Includes : Main Body x 1pcs Power Line x 1pcs Aligator Clips x 1 pair
Items with details. 1.Dual dc regulated power supply:- Product name : " power supply, digital (variable) 30-0-30 volts " Product code : " el-193" Description : Variable dual output Dual Display DC Power Supply Digital 30-0- 30V @2A Technical Specification : Output Voltage : 30-0- 30V @ 2A Output Current :0-2A Input Voltage: 110V, 60Hz. (Or 220V, 50Hz.) Constant voltage/ Constant Current Voltage and Current adjustment Power effect: CV
Specifics: Load Regulation: 10% Operation Time: 30min(continuous) Input Voltage: 230Vac/117Vac/50-60Hz Output Voltage: 13.8VDC Output Current: 25-27A Ripple Voltage:
Specifics: Load Regulation: 10% Operation Time: 30min(continuous) Input Voltage: 230Vac/117Vac/50-60Hz Output Voltage: 13.8VDC Output Current: 3-5A Ripple Voltage:
Specifics: Load Regulation: 10% Operation Time: 30min(continuous) Input Voltage: 230Vac/117Vac/50-60Hz Output Voltage: 13.8VDC Output Current: 5-7A Ripple Voltage:
