Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance. Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound. Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives. Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery. Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.
Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance. Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound. Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives. Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery. Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.
FOB Rotterdam PROCEDURE (TANK TO TANK) 1. Buyer submits ICPO, TSA and Company Registration Certificate. 2. Seller releases Commercial Invoice. 3. Buyer signs the CI and return to Seller. 4. Seller releases The following PPOP documents to the buyer secure channel: a. Refinery Commitment and Guarantee to Supply the product b. Statement of availability of the Product c. Tank Storage Receipt - TSR d. Product Passport 5. Upon receipt of the above PPOP documents, within 48 hours buyer present their Tank Storage Receipt - TSR as proof of storage availability. 6. Upon confirmation, seller sends Unconditional Dip Test Authorization (DTA) 7. Buyer conducts dip test in Sellers tanks and Lift the Product. 8. Buyer makes payment via MT103 or Wire transfer By MT103 for the total product available. 9. Buyer Lift the product and Seller pays all the intermediaries involved in the Transaction 10. Seller and Buyer proceed to sign contract for 12 month or more. FOB APPROVED PROCEDURE (TANK TAKE-OVER) 1. Buyer submits (ICPO) and Company Profile (CP). 2. Seller issues Commercial Invoice (CI). 3. Buyer signs the CI and returns to Seller 4. Seller issues The following PPOP documents to the buyerâ??s secure channel: a. Refinery Commitment and Guarantee to Supply the product b. Statement of availability of the Product c. Tank Storage Receipt - TSR d. Product Passport 5. Upon receipt of the above PPOP documents, within 48 hours Buyer proceed to contact the seller tank farm company and extend the tank for three (3) days. 6. Buyer conducts dip test in Seller's tanks and Lift the Product. 7. Buyer makes payment via MT103 for the total product injected into its tank as agreed and Seller issues to Buyer Title Transfer & Change of Ownership Certificate of the product. 8. Seller pays intermediaries involved within 48 hours after receipt and confirmation of the product payment. 9. Upon satisfaction by Buyer, both Buyer and Seller sign contract for month delivery with rolls and extension. If the procedures are suitable for you, please do not hesitate to contact us for further details. ICPO should be addressed to: End Seller via Gulliver Group Ltd.
Kerosene is an aviation fuel of various specifications, mainly used as a fuel for the gas turbine engines of jet and turboprop aircraft.
Radixsarl operates in Lebanon. Currently, we are running Worldwide operations from the United Arab Emirates (UAE) in the field of oil and petroleum trading. With years of affluent industry expertise and experience, we take pride in providing an extensive range of Jet Fuels (A1, JP54) along with chemicals, dyes & solvents. Our JET FUEL is quality assured and comply with international industry standards. Buyers can expect superior grade pieces, reliability, and admirable specifications in 240 per air-cooled price, having no match. Our Jet Fuels (A1, JP54) are demanded by local as well as international clients owing to the quality and our reputable position in the market. Our professional enterprise boasts an annual production of Large air-cooled under a highly strict quality control system, making Radixsarl a reliable Manufacturer and Importer of Jet Fuels (A1, JP54). We are accepting orders for JET FUEL with a minimum order quantity of 500,000 Gallon. For utmost customer satisfaction, a high level of transparency and proper documentation is maintained on purchases. We deliver orders in 6-7 Business Days via FOB, DEQ. we collaborate with numerous local and international distributors. For payment, we entertain EUR, USD, and T/T, D/A.
We successfully purchased jp54 and Jet A1 and are currently selling only to clients who are ready for face to face or video calls this is legit and we dont want time wasters . Also a valid TANK STORAGE AGREEMENT is a must for our compliance
Jet Fuel A1/JP54 : Quantity Per Mont-2, 000,000 Bbl Per Month Total Contract Quantity-2,000.000 Bbl X 12 Months Contract Period Of One Year Platts: This Is A Discount Structure)-$-10 Gross Usd $ -8 Net Usd Commision .Seller Side $1.00 Buyer Side $1.00 Origin Russian Federation, Loading Port At Seller's Option Shipping - Method Fob From Rotterdam Inspection - By Sgs Or Equivalent At Loading Port At Seller's Cost Payment Terms -from Top Western Bank, By Swift Mt 103/23. Standard Specifications.
Hello Buyer/ Buyer mandate, I am pleased to inform you that Sparrow Oil and Gas LLC, a registered direct mandate for a reputable end-seller company, currently has allocations available for a variety of petroleum products. These include: Crude Oil Gasoil/Diesel D2 Jet Fuel JP54 & A1 Fuel Oil D6 Mazut LNG/LPG Gasoline Petroleum Coke Other Refined Products Please note that all products are sourced from non-sanctioned countries. Should you have any inquiries or wish to discuss further, please feel free to contact us using the following details: We look forward to the opportunity of working with you.
We are an authorized consulting and mandate company working with a reputable end-seller company/refinery, granting us direct access to high-quality crude oil and petroleum products. We are registered to facilitate the sale of petroleum products to international customers, sourcing interested and qualified buyers for Kazakhstan and Russia-origin petroleum and petrochemical products. AVAILABLE INVENTORY: We currently offer a wide range of products, including but not limited to: EP54, Jet A-1, D6 Virgin Oil, EN590, Mazut, Diesel Gas Oil (D2), AGO, Aviation Kerosene, Fuel Oil CST 80/380, Pet Coke, LNG, LPG, REBCO, UREA, and more. These products are available for delivery from key locations such as Fujairah, Rotterdam, Houston, Singapore, and other major ports. We accommodate both FOB and CIF trading terms to provide flexibility in meeting your logistical needs. For more information, including pricing, seller procedures, and other details, please email us or contact us on WhatsApp to receive a copy of our standard port-authorized SCO.
We are an authorized consulting and mandate company, representing a reputable end seller/refinery with access to premium crude oil products. Our mandate is to negotiate petroleum sales with international customers, sourcing qualified and interested buyers for Kazakhstan and Russian-origin petroleum and petrochemical products. Available Inventory: Our current stock includes EP54, Jet A-1, D6 Virgin Oil, EN590, Mazut, Diesel Gas Oil D2, AGO, Aviation Kerosene, Fuel Oil CST 80/380, Pet Coke, LNG, LPG, REBCO, Urea, and more. These products are available in key locations such as Fujairah, Rotterdam, Houston, Singapore, and others. We operate under flexible FOB and CIF trading terms to suit your logistical requirements. For further details, please email us or reach out via WhatsApp to receive our Standard Port Authorized Approved SCO, including prices, seller procedures, and other information.
