The basic principle of the HJFQX series is compressing the air as power, shooting the high polymer materials whose size is bigger than the tube diameter into the inner tube. The polymer materials move fast through the inner tube wall and rub the wall so as to achieve a physical cleaning method. The normal operating air pressure is: 4kg-8kg. this machine adopts the size2mm2000 mmmm tube wall and can be used among in any size between these specifications. The polymer materials can clean the dirt, dust, and all the impurities adhered to the pipe with harmless to environment as well as the human body, which can provide the convenient and quick cleaning way. The polymers speed can be accelerated up to about 1km/min in the tube.
Gm-250 applications and main features: Gm-250 cotton waste recycling machine is good quality, high efficiency and low consumes. This machine removes impurities in the cotton using mechanical centrifugal force emerged by high speed revolving of barbed rollers and fluffs cotton, then presses to flakes, it can be used to processing ginned cotton, old quilt wadding, short floss, broken unginned cotton, waste yarn, and so on.It can remove dust and keep health. Fiber length is about 12-18mm. Main technical parameter: 1.Output:70-80kg/h 2.Roll diameter:250mm 3.Roll rotation speed :1900r/m for the first, 2100r/m for the second , third and fourth. 4.Motor: 7.5kw for first, 5.5kw for second, third and fourth. 5.Fan rotation speed:2900r/m 6.Outside dimension:4600x1500x1600mm 7.Weight:2200kg or so Outside dimension:4600x1500x1600mm Weight:2200kg or so
Character of this machine: 1. Saving power. It's power is 20.5kw/h. But gm250 is 38.5kw/h. 2. Output: 80-110kg/h; roll dia: 400mm;; fiber length: 18-25mm. ¦¦ú¦technical specification 1íó output: 80-110kg/h 2íó roll dia: 400mm 3íó working speed of roll: first roll is 1320r/min; second roll is 1420r/min;third roll is 1420r/min 4íó dust cage: diameter 500mm, Mesh: ª¦18íß4íß3(48-52/inch) 5íó suction rotary speed:2900r/m Saving power. It's power is 20.5kw/h. But gm250 is 38.5kw/h. 2. Output: 80-110kg/h; roll dia: 400mm;; fiber length: 18-25mm. ¦¦ú¦technical specification 1íó output: 80-110kg/h 2íó roll dia: 400mm 3íó working speed of roll: first roll is 1320r/min; second roll is 1420r/min;third roll is 1420r/min
1. This machine is used for cleaning corner welding seam of upvc window door 2. The machine adopts CNC Control System,which can design two-dimension process program of different profiles. 3. The feeding of X and Y axis adopts ball screw transmission with high precision and stable transmission 4. High processing precision because of size error compension function. 5. The machine can setup and store around 100 sets of processing program 6. This machine can be equipped with 3 cutters or 5 cutters or 6 cutters as per your requirement 7. Stable performance , easy operation, convenient maintenance, high precision, high efficiency
item laser cleaning machine Max. Output Power 100w/200W/1000W/2000W/ 1500W Usage Metal cleaning Average Power (W), Output Range(If adjustable) 0-200 Pulse-Frequency (KHz), Range 20-200 Scanning Width (mm) 10~80 Certification ce Warranty 3 years Core Components other, Laser source Welding mode Hand-held Laser Cleaning Head Laser source Raycus /reciBrand Laser power 100w/200w/1000w/ 1500w Optional cleaning materials Stainless Steel Carbon Steel Etc( Metal Laser Cleaning Machine ) Cooling System Water Cooling Fiber Length (m) 5m Color Customized Color Weight (KG) 240KG Dimensions: 1130 600 1130mm Keywords: laser cleaning machine
CNC Tube Bending Machine NBM38R2-4A Configuration: Servo Motor: Yaskawa (Japan) CNC Control System: Dynapath PC Base (USA) 15 inch colorful touch screen:Dynapath (USA) Reduction Gear: Spinea (Slovakia) High Bearing :NSK (Japan) Linear Guide : PMI (China Taiwan) 3D simulation ( Option) Operation Language: English Control System · Windows XP or above operating system, fast and stable. · CNC tube benders adopt PC-Based control system which offers graphic interface, quick conversion, easy operation and max. flexibility instead of PLC control system. · Built-in big capacity USB backs CNC tube benders bending data up automatically whenever machine is turned on to prevent from unpredictable data loss. · 10�/12�/15�/17� LCD touch screen with high resolution in CNC tube benders offers big icons and clear display. · USB ports provide convenient access of peripheral devices. 3D Simulation / Software Function · 3D Tube Simulation installed in CNC tube benders can immediately display 3D tube shape based on input data of Y.B.C program. It assists users in editing a correct program and prevents from mistakes effectively. · 3D Tube Simulation could be real-time shown on the screen while working in semi-auto or fully-auto bendingoperation. · 3D tube graphic & Tooling dimension data can be previewed in advance that brings users convenient & quick files categorizing and storing as well as data searching.
Extruded Plastic Teflon PTFE Tube Extrusion line (Φ150-300mm) PTFE ram extruder line is able to extrude ptfe/Teflon tube which dia from 150mm to 300mm. The automatic production line is computerize controll, which is really easy to operate. Meanwhile, the plastic Teflon extrusion machine is advance designed, high output, low energy consumption, long-life, and also our professional engineer is available to offer overseas after sale service. The extrusion machine had has continue improved in past 10 years with high quality and stable operation. PTFE machine Ram extrusion machine for Teflon PTFE Tube The China vertical PTFE RAM Extruder is designed with 2 pressure plates, so the ream is affected via a slid pressure plate. The China tube ram extruder is equipped with two hydraulic cylinders. The main cylinder serves to move the ram; the additional cylinder serves for retracting the mandrel. Base plate and dosing tray are water-cooled. The PTFE Molded powder is feed into the rotating hopper via an exact working powder dosing device, controlled by a level indicator. By means of a rotating blade the powder is wiped uniformly into the cavity of the mould. Range of diameter PTFE Extrusion 150 to 300 mm, Heating zones 5 zones The complete electrical control is laterally fastened at tube ram extrusion. With a PC touch screen panel all speeds and temperatures can be programmed. Electronics contain the necessary automatic controllers for speeds and temperatures. 4-6 temperature regulators are contained in the plant, four for the extruding ptfe and one automatic controller for a mandrel heating element. The maximum output speed of PTFE extrusion depends on: PTFE Material, outside PTFE tube diameters and PTFE product heating length. PTFE Equipment Warranty: according to our standard terms: 12months Technical Specification: PTFE Tube Extruder Dia 150mm-300mm Technical Data of PTFE machine Description Model No. Machine model PFG-300 Plastic Extruder PTFE Tube Power 25 kw Min - Max Dia 150-300 mm Tolerance 0.1-0.2mm Length Unlimited Production Per Hour 7-14kg Electricity Consumption Per hour 1.5 kw Weight of the Machine 1980 kg High of the Machine 2960 mm Floor area of the Machine 4.6 M2 Warrenty for Parts 1 Year Machine Gurantee Period 1 Year Free Spares 1 set Deliver LT 30 Days
1.Semi-Automatic Tube Bending Machine Tube Bending Machine Model: SB-38NC Max. Bending Capacity:Â ï¿ 38.1 (1.5�??)�?2mm Bending Degree: 0-190° Bending Radius: 20-200mm (for machine) Min Bending Radius: R�?�1.5D (for pipe) Mandrel Length: 2000mm(can be customized) Max. Bending Speed: 90°/s Bending Accuracy: ±0.1° Motor Power: 4 Kw SLS Semi-automatic tube bending machine has an NC control unit to allow the operator to program the bend degree (C axis)-the standard memory can store up to 16 programs each with 16 sequential bends.This allows the operator to select from the memory to bend sequence they require and load the tube and start bending. The rotating and feeding (B&Y axis) are controlled manually. Other movements as die working,mandrel working are controlled by hydraulic. Pipe Bending Machine combines easy-to-use operation with high bending accuracy and cost effectiveness. It is the practical semi-automatic solution for small to medium productions. STANDARD Bending Axis-by Hydraulic ,Feeding Axis-by Manual,Rotating Axis-by Manual. Human Interface offers easy access to auto and manual operating modes. Fully hydraulic movement on clamp die,pressure die and mandrel. Available pipe material: steel, stainless, aluminum, titanium and brass... Available pipe shape: Round,Square,Rectangle,Oval,Solid Bar,other profiles... Equiped with encoder ensures the accuracy and stability of bending. Equiped with adjustable speed valve on pressure die ensures the synchronization of bending. Water cooling system ensures the equipment long-time work stably under the high temperature. CE&ISO 9001:2000 OPTIONAL of Tube Bender Automatic pipe rotating(by servo motor) or Automatic pipe feeding(by servo motor) Anti-clockwise bending Extra mandrel length Pipe punching function PLC controlling Tie rod bars on bending arm Feeding length positioner Mandrel lubrication function Air cooling device Cooling Conditioner Safety mat TOOL: STANDARD MATERIAL: 45# STEEL OPTIONAL MATERIAL: Ampco Bronze- Mandrel&Wiper die for Stainless Steel Pipe Nylon- Bending die,Clampe die&Pressure die for Aluminum Pipe Cr 12-For other pipe material ACCESSORIES: TOOL,TOOL BOX, MANUAL OPERATION, INSTALLATION DVD, SPARE PART
PFG600 Single Screw Extruder Features: Save time and money. PLC design and easy to operate. Long time span. No heating effect during operation. With latest technology and optimized design. Min - Max Dia:300-600mm. Production Per Hour: 9-18kg/h. Unlimited Length Automatic operation. Polymer PTFE ROD RAM EXTRUDER AUTOMATIC MACHINE Product Description- RAM Extruder For PTFE Tube(300-600mm) Sunkoo PFG600 Tube Extruder is to extrude PTFE/UHMWPE Tubes. It is designed using latest technology, fully reliable and easy to operate for customers. Performance in terms of production and working hour capacity is competitive to other machines. Low maintenance is required , giving high production in market. PFG600 Single Screw Extruder Features Include: 1.Vertical Ram Extruder for PTFE Tubes 2.Ram extruding machine for PTFE Tubes. 3.Using for Pre-sintering PTFE material. 4.Suit for new PTFE material or Recycle PTFE material. 5. Adjustable Heating zone: 5 zone area 6. Long service life through solid workmanship and use of high quality components. 7. Measurement transducer like pressure, force and ram speed for permanent control of the extrusion process and extrusion speed. 8. Measuring and controlling system for constant extruder speed 9. Low space requirement through vertical construction 10.Operating through touch screen and recording of the extrusion process parameters Benefits: 1. Save time and money, good advantage price offer to customers. 2. Intelligent and easy-to-use operations. 3. Small workplace required due to its compact design and electricity saving machine. 4. Super quality output and the physical properties is adjustable. 5. Precise temperature control, reaches + -1 degree. 6. Long- life, with modern technology and optimized design. Q&A for Vertical Type Tube Ram Extruder Machine · Which is the maximum extrusion capacity in sintered liner in meter per hour? A: Can change pressure time, each extrusion length and temperature to adjust the speed depend on size and wall thickness. about 1500 to 2500mm per hour.
