Please provide a quotation to the following requirement from importer -
Product Name: Low Density Polyethylene (LDPE)
Specifications :
DPE MP3425 Complies With The Requirements As Below Indicated When The Product Is Processed Using The Correct Practice And Testing Procedures
Properties
Unit
Test Method
Typical Value
Density ( Compound ) At 23ºc
G/cm3
ASTM D 792
0.934
Melt Flow rate 2,16 kg al 190ºC
g/10min
ASTM D 1238
0.25
Melt Flow rate 5kg at 190ºC
g/10min
ASTM D 1238
1.0
Carbon Black Content
%
ASTM D 1603
Greater Than 2
Vicat Softening Point
ºC
ASTM D 1525
98
Melting point
ºC
ASTM D 2117
124
Brittleness Temperature
ºC
ASTM D 746
Less Than -70
Tensile strain at break
%
ASTM D 638
22
Tensile elongation
%
ASTM D 638
Greater Than 600
Hardness
Shore D
ASTM D 2240
50
E.S.C.R. 10% igepal F50
Hr
ASTM D 1693-A
Greater Than 5000
Oxidation Induction Time 210 ºC
Min
ISO 11357
Greater Than 20
Please quote for the following wholesale product requirement -
Product : Two high density polyethylene (HDPE), 80 microns Thick Inner Bags
Specifications:
Purdue Improved Crop Storage (PICS) bags for simple, low cost method of reducing post-harvest grain losses due to bruchid/insect infestation
Technical Specifications: Type, weight and dimensions
PICS bags made of:
1.1 Two high density polyethylene (HDPE), 80 microns thick inner bags
1.2 One polypropylene (PP) woven outer bag
1.3 Suitable for storing grain and seed without using chemicals to control insect pests
1.4 Condition: New
1.5 Capacity: 100kg
1.6 Dimensions: 70 cm x 135 cm (Approx.)
1.7 Capable of storing a variety of legume and cereal crops for more than one year after harvest
1.8 Able to provide hermetic condition when sealed or tied
1.9 Water resistant
1.10 Colour: Transparent inner bags and White outer bag
2.0 Technical Specifications: Marking
The woven outer bags should be clearly and indelibly marked with the following:
2.1 Manufacturers name and/or trademark.
2.2 PICS (Purdue Improved Crop Storage) in English as shown in Figure 1 bellow
3.0 Technical Specifications: Packing
3.1 They must be protected from damage during shipment
3.2 They should be packed in bundles of 300 bags
6.0 Warranty:
The minimum requirement is for a twelve months warranty period.
