CR -6062 Industrial grade fuel level transmitter (fuel level sensor) is a special instrument tailored for the accurate measurement of fuel level such as railway locomotive, automobile fuel tank, tank truck and fuel depot. The whole machine does not have any movable or elastic parts, and is resistant to impact, easy to install, high in reliability, high in precision, and good in performance and price. It can be installed in various occasions to accurately measure and control the fuel level of gasoline, diesel fuel and hydraulic fuel. It is also suitable for the measurement of various non-conductive liquids. Such products can also be used to measure conductive media in the case of particularly harsh on-site conditions, particularly severe electromagnetic interference, and particularly high agitation.
Detection range: 0.05 -5m
Accuracy: 0.1, 0.2, 0.5
Pressure range: -0.1MPa-32MPa
Probe temperature resistance: -50 -250
Output signal: 4-20mA, 4-20mA superimposed HART communication, 485 communication, CAN bus communication
Power supply voltage: 12-28VDC (Intrinsically safe type needs to be powered by safety barrier)
CR -6062 Standard Fuel Level Transmitter (Fuel Level Sensor) Industrial grade, suitable for measurement of viscous fuel quality below 5MPA and temperature below 200, can be connected with various protocols
CR -6062 Compact fuel level transmitter (fuel level sensor) Industrial grade, suitable for measurement below 5MPA, temperature less than 200, low viscosity fuel, can be connected with various protocols
The CR6061 digital liquid level sensor is based on the principle of RF capacitance measurement. It uses tomography to dynamically analyze various parameters of the sensor in the medium, and automatically compensates accurately. The output signal changes linearly with the change of liquid level. The whole machine does not have any elastic parts and movable parts. It is resistant to impact and easy to install. It can be installed in various occasions to accurately measure the oil level of gasoline, diesel oil, hydraulic oil and other liquids of various corrosive liquids.
The CR6061 digital liquid level sensor is based on the principle of RF capacitance measurement. It uses tomography to dynamically analyze various parameters of the sensor in the medium, and automatically compensates accurately. The output signal changes linearly with the change of liquid level. The whole machine does not have any elastic parts and movable parts. It is resistant to impact and easy to install. It can be installed in various occasions to accurately measure the oil level of gasoline, diesel oil, hydraulic oil and other liquids of various corrosive liquids.
SOJI ELECTRONICS delivers "Advanced Fuel Management Solutions" and is the premium brand for capacitive fuel level sensor with outstanding features: high accuracy (up to 99.5%), wide operation temperature, flexible length, exact algorithm, smart software and easy installation.
Our most advanced intelligent spot detectors, multi-criteria/multi-sensor devices use multiple sensors to detect various conditions in an environment sensing a wider range of fires with greater accuracy.
Features & Benefits:
Multi-Criteria/Multi-Sensor smoke detection
Unique ability to detect major elements of a fire
Highest nuisance alarm immunity
Advanced algorithms interpret and respond to multiple inputs
Fuel tank oil level sensor UT-81A
As a provider of one-stop power station equipment solutions, YOYIK not only has a complete standard product line, but also provides customized design and production services according to the specific needs of customers. The company's products cover multiple industries such as electricity, metallurgy, chemical industry, mining, etc., meet the special requirements under different working conditions, and demonstrate the flexibility and professionalism of the company with customized services.
Yoyik can offer many spare parts for power plants as below:
#DF-Fuel tank oil level sensor UT-81A-DF
Eddy Current Sensor PR6423/002-000
IR Compressor Controller 19067875
SWITCH PRESSURE 101NN-K3-N4-CIA
Power Board S-100-24z
speed sensor A5S05T90-10m
CONTROLLER WIHT BODBUS TCP INTERFACE SPBRC410
Sensor DF310580-50-06-02
Frequency transducer WBF154S01
Integrated vibration speed transmitter YD9200A-T-30V-01-30
Probe 9200-01-01-10-00
industrial tachometer sensor CS-1-D-075-03-01
LVDT Sensor HL-6-150-6
Excitation Rectifier Bridge Signal Interface Card UA D215
Eddy Current Sensor PR6422/104-010
Bentley extension cable 330877-080-36-00
Eddy Current Sensor PR6424/001-001
Control interface board PC D231 B
Flame detection probe IFD100-SF
LVDT transmitter XCBSQ-02/500-01-22
TURBINE MAIN OIL TANK VACUUM PRESSURE LOW RC0450CZ089H
SENSOR LVDT FOR MSV TD-1 500MM
Module ADAM-4017
Pressure Switch 9NN-K45-M4-C1A
temperature sensor WZP2-005-110mm
Sensor DF310501
instrument to measure pressure Y-60ZT
Power Contactor CZO-400/20
LVDT transmitter XCBSQ-04/100-02-00
Bolt heater control cabinet LU-12
Guide vane opening table DYK-11-103.3/1
Eddy Current Sensor PR6422/001-101
LVDT Sensor 3000TDGN-100-01-01
Speed sensor CS-1G-D-075-05-01
LVDT transmitter XCBSQ-01/50-01-11
Current Transducer FPAX-A2-F1-P2-O30-5A
thermocouple TC03A2-KY-2B/S1B
Fuel tank oil level sensor UT-81A
MY-DFYL-2025-3-5
CR -6062 Industrial grade fuel level transmitter (fuel level sensor) is a special instrument tailored for the accurate measurement of fuel level such as railway locomotive, automobile fuel tank, tank truck and fuel depot. The whole machine does not have any movable or elastic parts, and is resistant to impact, easy to install, high in reliability, high in precision, and good in performance and price. It can be installed in various occasions to accurately measure and control the fuel level of gasoline, diesel fuel and hydraulic fuel. It is also suitable for the measurement of various non-conductive liquids. Such products can also be used to measure conductive media in the case of particularly harsh on-site conditions, particularly severe electromagnetic interference, and particularly high agitation.
The CR-6062 industrial grade fuel level transmitter (fuel level sensor) core components are converted to standard electrical signals (typically 4-20 mA) using advanced RF capacitance sensing circuits through 16-bit microcontrollers with precise temperature compensation and linear correction. Optional HART, CANBUS, 485 communication protocol for system configuration. The full range of transmitters are self-calibrating, allowing users to automatically calibrate zero and range with two buttons or two leads to suit different requirements in complex locations.
The sensing part of the CR-6062 industrial grade fuel level transmitter (fuel level sensor) is a coaxial container that causes a change in the capacitance between the sensor housing and the sensing electrode when the fuel enters the container. This variation is passed through the circuit. The conversion is performed with precise linear and temperature compensation, and a 4-20 mA standard signal is output to the display meter.
HPT612-W is full sealed submersible level sensor.
It is made by building in high stable and reliable piezo-resistive silicon pressure sensor and high accurate circuit board into the stainless steel housing. Integrated construction and standard signal provide the user easy and convenient application in the local working place. The special cable connects with housing, can be immerged into the media for a long time.
HPT612-W level sensor has smart structure, high accuracy and good stability; it can be used for water or liquid measure and control of medicine, metallurgy, electricity, mine, city water supply and drainage and hydrology, etc.
HPT612-W level transmitters is based on Zigbee wireless protocol and max transfer distance up to 400 meters, if add a wireless signal router, distance up to 800 meters.
Characters:
Accuracy: �±0.25%F.S.
Wide working temperature scope
Double supply by battery&DC power
User-defined data transfer interval time
With English level monitor PC software
Highly-efficient lighting absorption
and strong RFI & EMI resistance
Remote signal transfer by Zigbee.
1.5 times range standard overload.
3 times range burst pressure
CE approving
Applications:
well depth measurement and control
water tank level measurement
river level measurement and control
wireless level monitor system
Industrial course testing and control
Building water supply systems
Oil and Fuel Tank level measuring
Automatic detection system
Saving water to irrigate
Liquid pressure and level measurement
And so on
HPT604 is full sealed submersible level sensor /transmitter. It is made by building in high stable and reliable OEM piezo-resistive pressure sensor and high accurate circuit board into the stainless steel housing. Integrated construction and standard signal provide the user easy and convenient application in the local working place. The special cable connects with housing, can be immerged into the media for a long time.
HPT604 level sensor /transmitter has compact size, light weight and good stability; it can be used for water or liquid measure and control of medicine, metallurgy, electricity, mine, city water supply and drainage and hydrology, etc.
