MP Recykling Ltd.

MATERIAL : LDPE/LLDPE RPG CATEGORY : LDPE/LLDPE TYPE : Pellet GRADE : Natural SPECIFICATION : "LDPE/LLDPE RPG(BLOW FILM GRADE, NATURAL) MIN 2X40'HC PER MONTH WITH REGULAR BASE MFI : 0.9 ~ 1.2 TENSILE STRENGTH : 10 ~ 12 MPA ELONGATION : MIN 850% MOISTURE : LESS THAN 0.5%" ORIGIN : Korea LOADING WEIGHT : 23 FOB (USD/Ton) : $950-1150

HDPE: HDPE cable material Property Unit Typical Value Mass density g/cm 3 0.941-0.959 Melt flow Rate(190 centidegree /2.16kg) g/10min 1.0 Tensile yield strength MPa 19.0 Flexural modulus Mpa 965 Elongation@ break % 400 Impact Embrittlement temperature centidegree MAX -118 Dielectric Constant 100KHZ 2.32 1MHZ 2.31 Loss Tangent 100KHZ MAX 0.0001 1MHZ MAX 0.0001 Volume resistivity OHM-CM MIN 1x10 15 Application Mainly used for the production of high toughness of the telephone,cable insulation material LDPE: Physical Properties Test Method Nominal Value Unit Density ISO 1183 0.921 g/cm3 Melt Mass-Flow Rate (MFR) ISO 1133 1.9 g/10min Hardness Shore Hardness (shore D) ISO 868 45 Mechanical Properties Tensile Modulus ISO 527-2 175 MPa Tensile Strength Yield, ISO 527-2 9.0 MPa Break, 13.0 MPa Tensile Strain(Break) ISO 527-2 850 % Modulus of Elasticity Internal Method 250 MPa Thermal Vicat Softening Temperature ISO 306/A50 89.0 �°C Melting Temperature (DSC) DIN 53765 108 �°C Peak Crystallization Temperature (DSC) DIN 53765 97.0 �°C Heat of Fusion DIN 53765 110 J/g Electrical Volume Resistivity ASTM D257 8.5E+15 ohm â?¢cm Dielectric Strength ASTM D149 30.0 kV/mm Dielectric Constant (60Hz) ASTM D150 2.20 % Dissipation Factor (60 Hz) ASTM D150 0.00050 LLDPE Properties Test conditon Test method Test data Unit Density 0.91 MFI 2 Drop impact strength ASTM D-1709 90 g Elongation ,vertical/horizontal ASTM D-882 600/800 % tensilestrength,thermal resistance ASTM D-1004 105/95 Kg/cm elongation ASTM D-638 930 % tensile strength ASTM D-638 180 tensile strength,vertical/horizontal ASTM D-882 380/350 Vicat softening point ASTM D-1525 103 C melting point ASTM D-2117 126 C Turbidity ASTM D-1009 12 % 45 glossness ASTM D-2457 75 %

Specification: Make barrel, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating. Application: HDPE (high density PE) - is used in products and packaging such as plastic bags, milk jugs, detergent bottles, margarine tubs, garbage containers, water pipes, woven bag, raincoat, polyethylene monofilament, woven yarn etc.. LDPE resins are made by high pressure autoclave process and mainly used for blown film extrusion and wire coating (cable sheath) etc.. They are widely used for applications for general purpose packaging films, heavy duty bags, shrink films, and foams. Application Suitable for film, heavy packaging film, cable insulation materials, blow molding and foam products.

Application: DS7601 application on PP, textiles, fabrics. Composition: Polypropylene synthesis Pipe grade

lldpe/ldpe floor sweeps from film manufacturing only mostly natural color contains small amounts of: purge, leaves, wood, cardboard, color concentrate needs to go through wash line , 1load is available, loading weight : 35,000 pounds/cont USA orgin, subject to unsold

LLDPE/LDPE 99/1 Transparent Color MATERIAL: LLDPE/LDPE 99/1 Transparent Color CATEGORY: LLDPE/LDPE TYPE: 99/1 GRADE: Transparent color SPECIFICATION: LLDPE/LDPE 99/1 from Korea ORIGIN: Korea LOADING WEIGHT: 25 Tons CNF (USD/Ton): 700-900 Hai Phong, Vietnam

2Lians Recycling Pte Ltd can supply below scrap product: LLDPE/LDPE Film Natural Color For Recycling MATERIAL: LLDPE/LDPE film natural color CATEGORY: LLDPE/LDPE TYPE: Film GRADE: Natural color SPECIFICATION: LLDPE 80% LDPE 20% bales 50MT Origin: Korea LOADING WEIGHT: 21 Tons FOB (USD/Ton): 680-780

LLDPE + LDPE Film Sorted Transparent 70/30 Plastic Scrap For Sales MATERIAL : LLDPE + LDPE film sorted transparent 70/30 CATEGORY : LLDPE + LDPE TYPE : Film GRADE : Sorted transparent 70/30 SPECIFICATION : 70% LLDPE, 30% normal LDPE, no contamination ORIGIN : Germany LOADING WEIGHT : 20 Tons FAS (USD/Ton): 650-900