Drill Bits
Power Screw Bits
We specializes in drill bits, drill pipe, Mud pump and stabilizers for water well, oil field, construction, geothermal, directional boring, and underground foundation work all over the world. Our purpose is to sell the best quality products at the lowest possible price. We are professional supplier of new and used(rebuilt) drill bits used for oil filed, water well. Including tricone bits,PDC bits and drill pipe. Various of model and dimension available. Good condition and reasonable price. Product Description: Steel teeth Bits 114-117, 127 Soft Formation Tooth Bits The 114-117 bits are used to drill low-compressive strength, soft formation. Long projection tooth lengths are used on high offset cones to provide the greatest penetration rates possible. Wear-resistant hard facing is used to control tooth wear. On the softest bits type this hard facing completely covers the bit teeth. 127 Medium-Hard Formation Tooth Bits The 127 bits are used to drill high-compressive strength, medium hard formations. Short projection teeth with reduced crest length are used in this series of bit designs. Durable hard facing is applied to reduce tooth wear. Medium hard with high compressive strength and hard streak (hard shale ,sandstone , limestone, etc.) 437 Soft Formation TCI Tricone Bits The 437 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, result in high bit penetration rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations. 517 Medium Formation TCI Tricone Bits The 517 features aggressive chisel tungsten carbide insert on the heel rows and inter rows. This design provides a fast drilling rate and added cutting structure durability in medium-to-medium hard for-mationes. The HSN rubber O-ring provides adequate sealing for bearing durability. 637 Hard Formation TCI Tricone Bits The 637 bits can be used to drill hard and abrasive forma-tions. Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical-durability and long life. 617 Medium-Hard Formation TCI Tricone Bits The 617 feature robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fest drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-rin provides adequate sealing for bearing durability. Plywood case or according to the conform order.
Company Introduction Our company (Hebei Goldman Petroleum Machinery Co., Ltd.) is located in Hejian City, a historical city nearby Capital Beijing. Hejian city is nearby the well known Huabei Oilfield ,which propelled the establishment and development of Goldman. We specialize ourselves in researching and production of rock drilling bits, mainly including tricone bits, PDC bits, drag bits, HDD hole opener, roller cutters and related tools like drill pipe,rotary slips, and so on. Our products are mainly used for oil well drilling, gas well drilling, geothermal well drilling, mining, geological survey, water well drilling, HDD pipelines projects and foundation projects. Product Detailed Description 1.Cutting Structure The wear-resistance of the teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for the steel tooth bit.The durability of premium tungsten carbide inserts is improved with new formulas and new techniques for insert bit 2.Gauge Structure Multiple gague protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone,tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capacity and bearing life. 3.Bearing Structure High precision journal bearing with two thrust faces,Balls lock the cone.Hardfaced head bearing surface.Cone bearing inlaid with friction-reducing alloy and then silver-plated.Abrasion resistance and seizure of the bearing are improved.and suitable for high rotary speed 4.Seal and Lubrication The advanced metal seal package consists of two metal seals and two elastic energizers.Compressed energizers ensure good contact being kept on two sealing surfaces of metal rings by elastic force,and achieves the bearing seal.In the drilling,metal seals are relatively dynamic,and the energizers are static.This will improve the reliability and durability of bearing seal.The pressure compensator system and advanced grease can greatly increase the lubricating reliability. Our Services (1) We are manufacture can supply good quality goods and competitive price (2) We not only have ourselves design but also can accept customization (3) We have fast and on time delivery time (4) Every bits have it's quality assurance (5) Contact our anytime if you have any question with bits. (6) 24 hours on time reply Contact us All sizes and type can be customized. If you need,welcome to contact me at any time.
1.Brief introduction Size 311.1mm Iadc 537 Bearing type Sealed bearing Thread connection 6 5/8"reg pin Wob(kn/mm) 0.35~1.05 Rpm(r/min) 80~40 Make up toqure(kn.M) 16.300~21.700 Weight(kgs/pc) 105 Color Customized Packing Plywood box(free-fumigation) Industrial standard Sy/t5164 Moq 1 pc Payment terms T/t, western union, and l/c are acceptable Applications Medium soft with low compressive strength and harder abrasive stringers, such as hard shale, hard gypoltye, soft limestone, sandstone, and dolomite with strngers, etc. Note:other size and iadc is avaiable Weight 45kg
1.Tighten the bits when screw on. 2.When the bit lower down to the bottom , Should give a soft pressure, slow drilling .After a drilling 0.2m-0.3m with appropriate pump, then give the conventional drilling. 3.Drilling could not be without water, if not fear the normal vibration sound or drill too slow, lift the drill to check without delay. 4.When drill jammed, withdraw first, should not to force the rig start. 5.Drill could not without water, to ensure that the bit will be too hot. 6.Use the bits in right order , big size first, then small one . 30*35*40cm 45kg
The used tricone bits are much more cheaper than the new ones because of the cost is low, but the quality is promised. 30*35*40cm 45kg
Wooden case.
Available for sale on behalf of my client: Two pieces of Diamond Drill Bits, American Oil and Gas Augur heads, produced by DPI PDC USA Original. Big bit size 12.1/4 inches Small bit size 8.1/2 inches Completely new, never used.
