Product Introduction:This product named Manual Call Point,Website:,also called emergency door release button or manual pull button.1.Fire--When there is a fire,pull button to issue a signal to a fire alarm control panel,the control panel will showing the serial number of the call point or the location and send out alarm sound, once it received the signal.Access control--When there are chaos or emergency surround you,pull the call point to open the corresponding safety, door.2.Applicable type: safety, door, escape door, safety systemTechnical Parameters:Product nameManual Call PointBrandYIXINModelYX-BP562TypeGlass breakOperating voltage12-220VDCOperating current5AWithstood-voltage250VACContact modeNO/NCPoleSingle/Double pole optionalColorRed/Green/Yellow/Blue/White optionalCoverWith water-proof cover optionalDimension91*87*55mmWarranty1 YearProduct, Feature, :1.Key reset manual call point use plastic sheet which can reused and reset.2.It takes just a few seconds to reset the call point by Special key after pull.3.The manual call point can use its own, bottom case surface mounted or recessed mounted,easy to install.
Product Introduction:This product named Manual Call Point,,is usually referred to as an MCP within the fire protection industry, as a "Fire Alarm Call Point" in US, or as a "break glass" in the UK. They are used to allow building occupantsto signal that a fire or other emergency exists within the building. They are usually connected to a central fire alarm panel which is in turn connected to an alarm system in the building, and often to a local fire brigadedispatcher as well.Manual call point is used to initiate an alarm signal.Break glass at the time ofthe fire to issue a signal to a fire alarm control panel,the control panel will showing the serial number of the call point or the location and send out alarm sound once it received the signal. It can be manual alarm systemor part of automatic alarm system. In the case of fire when the glass cover is broken, the push button will be released by the spring action and will actuate an alarm at the control panel through its switching contacts. Inaddition to this, there will be an LED indicator on the control panel for visual indication to locate the call point easily.Product Parameter:Product nameManual Call PointBrand nameYIXINModelYX-BP560TypeGlass breakOperating voltage12-220VDCOperating current5AWithstood-voltage250VACContact modeNO/NCPoleSingle/Double pole optionalCoverWith water-proof cover optionalColorRed/Green/Yellow/Blue/White optionalBreaked materialGlass sheet(Plastic film on glass)Dimension87*87*52mmWarranty1 YearProduct Feature:1.Available for flush or surface mounting2.Test key inserted from side to test after installation.3.Use plastic film on glass sheet avoid splash of broken pieces and hurt.4.Surface technology: fireproof material, dull polish5.Standard structure: fireproof material shell, easy to install. 6.Suitable for the majority of conventional fire alarm systems.
Introduction:The emergency door release manual call point is 3 poles with sounder and light. The manual call point are used to allow building occupants to signal that a emergency exists within the building.SpecificationsProduct NameEmergency Door Release Manual Call PointPower supplyDC 12-24VOperation currentDC 12V/18mA(Standby)/75mA(Operation DC 24V/11mA(Standby)/41mAOperation)BuzzerSet as silent, interval wailing or continuous wailingIndicatorDual-color (red and green).Red indicator to set blinking,off or on.OutputN.O.N.C.&COM.Output(Maximum load of 125V/3A)MaterialABS,PC(trasparent part)Starting parts typeReusableStarting modeManual pull down plateReset modeKey resetWeight208gDimensions90*93*45mmInstallationSurface mounted with screwFeatures1.Resetable design,obvious indicators around the edges of the unit.2.Press the pressing plate to enable the output function.3.Pressing plate with status (green and red) shown.4.Reversionary key with non-slip design.5.Input power range from DC12-24V to connect with all types of alarm system.6.Built-in buzzer status to set as silent,interval wailing or continuous wailing Volumeis adjustable.7.Easy to assemble,outer case without screws,3 set of output points to connect other equipment,embedded or surface installations to select.Note: only has output point function.
Product introduction:This products name manual pull station,also name fire alarm pull station,it is used to manually transmitfire alarm signal, it provides contact closure to activate emergency equipment, audible and visual signals, and alarm panels.Fire alarm pull station is an active fire protection device, usually wall-mounted, that, when activated, initiates an alarmon a fire alarm system. In its simplest form, the user activates the alarm by pulling the handle down, which completes a circuit and locks the handle in the activated position, sending an alarm to the fire alarm controlpanel. After operation, some fire alarm pull stations must be restored to the ready position using a special tool or key in order to deactivate the alarm sequence and return the system to normal.Details introduction:1.The manual pull station provide a textured finger-hold area that includes Braille text. In addition toPUSH IN and PULL DOWN text, there are arrows indicating how to operate the station, provided for non-English-speaking people.2.Pushing in and then pulling down on the handle activates the normally-open alarm switch. Once latched in the down position , the word" ACTIVATED" appears at the top in bright yellow,with a portion of the handle protruding at the bottom as a visible flag.3.Resetting the station is simple: insert the key, twist one quarter-turn, then open the station's front cover, causing the spring-loaded operation handle to return to its originalposition. The alarm switch can then be reset to its normal(non-alarm) position manually(by hand) or by closing the station's front cover, which automatically resets the switch.Package:1 x Fire alarm call point2 x Keys1 x English manualSpecification:Product NameManual Call PointRated voltage24VDCRated current45mAQuiescent current .5mAAlarm current 2.3mAContact resistance100mWStarting parts typeReusableStarting modeManual pull down plateReset modeKey resetWeight225gDimensions105*140*45mmInstallation
Product introduce:1. When the accident happens, press the plastic elements to alarm or open the door. Plastic elements had printing a indication.2. There are four colors, red, yellow, white, green.* The red used for FIRE fighting.* The white and green can be used for the access control system, emergency safety door.* The yellow is generally a warning function and an emergency rescue for natural disasters.Specifications:Product nameManual Call Point,Emergency door releaseBrand nameYIXINModelYX-BP560STypeGlass breakOperating voltage12-220VDCOperating current5AWithstood-voltage250VACContact modeNO/NCPoleSingle/Double pole optionalColorRed/Green/Yellow/Blue/White optionalBreaked materialPlastic filmCoverWith water-proof cover optionalDimension87*87*52mmWarranty1 YearProduct Feature:1.The manual call point use plastic sheet which can reused.2.Adopt plastic film instead of glass to avoid cutting the hand when alarm.3.The shape is rugged and durable,the shell is made of fire retardant materials, and the product components are resistant to high temperature and shock resistance.It is special design for fire alarm control panel and security alarm system.
For the Mosquito killer Led Bulb Light, is a 900 lumen bulb that doubles as an insect killer. The light features a blue UV LED which attracts insects into a Mosquito Killer grid.And the Mosquito Killer grid uses only 1W of electricity, while the light itself uses a meager 9W – and both can be used independently.They are used at home and outdoor. A brush is provided to clean off insects once the bulb switched-off.Compare to other traditional mosquito killer, this bulb has no chemicals, no sprays and hence no fumes to our life. 2nd generation 2-in-1 LED LIGHT Bulb Plus LED Mosquito Killer Bulb Wattage: 10W Blue UV light Lumen: 900-1000lm Color Temperature (CCT): 6500K Input Voltage: AC 90-130V & 220v-240V With CE and ROHS Operation: Step1: Switch it on,both lighting +killing are on. Step2: Switch on again,light off,only killing on. Step3: Switch on again,killing off,only light on. Step4: Switch off, both off.