YST307GU series are RFID reader/writer module which pick or send command by USB ports. YST307GU series meet kinds of international contactless IC card standards. Also YST307GU series can support kinds of cards from suppliers. YST307GU series RF antenna is separated from the module. The RFID module can be very good at reading/writing and very stable for impedance analyzer adjusting between RF circuit and antenna. The module is connected to the antenna by the 50���© cable. It is with flexible antenna size and layout. Characters: The module is connected to the antenna by the 50���© cable. It is with flexible antenna size and layout. Qualifications PCD: NXP RC400 Working frequency: 13.56MHz RF standard: ISO15693 SAM card slot: 2 Cable to antenna: 60cm, can be custom-made, 0.1-1.5mm Operating distance: 80mm(depending on card and antenna design) Anti collision ability: Full functions anti collision; be able to process multi-card simultaneously; be able to set operate single card only. Auto detecting card: yes, default OFF EEPROM: 4K Interface: USB Max command length: 1024 Bytes Interface level: 3.3V Power consumption: 50mA Dimension: 80mm*60mm*8.5mm Package: DIP32 Weight about:100g
YST307AS series are RFID reader/writer module which pick or send command by RS232 ports. YST307AS series meet kinds of international contactless IC card standards. Also YST307AS series can support kinds of cards from suppliers. YST307AS series RF antenna is separated from the module. The RFID module can be very good at reading/writing and very stable for impedance analyzer adjusting between RF circuit and antenna. The module is connected to the antenna by the 50���© cable. It is with flexible antenna size and layout. Characters: The module is connected to the antenna by the 50���© cable. It is with flexible antenna size and layout. Qualifications PCD: NXP RC500 Working frequency: 13.56MHz RF standard: ISO14443A, ISO7816 SAM card slot: 2 Cable to antenna: 60cm, can be custom-made, 0.1-1.5mm Operating distance: 80mm(depending on card and antenna design) Anti collision ability: Full functions anti collision; be able to process multi-card simultaneously; be able to set operate single card only. Auto detecting card: yes, default OFF EEPROM: 4K Interface: RS232 Max command length: 1024 Bytes Interface level: 3.3V Power consumption: 50mA Dimension: 80mm*60mm*8.5mm Package: DIP32 Weight about:100g
Model: JMY680H 1.Product introduction JMY680H is a RFID read/write module with an UART/IIC/RS232C serial port. The module has various functions and supports the ISO/IEC14443A&B and ISO15693 and ISO7816 contactless cards. Users operate the module via simple command. The module embedded with SAM slot that operate contact smart card according to ISO7816. The module builds in antenna. 2.Characteristics PCD model:NXP CL RC632 Working frequency: 13.56MHz Card supported:Mifare 1K/4K, FM11RF08, Ultra Light, DesFire, Mifare ProX, SR176, SRI512, SRI1K, SRI2K, SRI4K, SRIX4K, T=CL smart cards(both ISO14443A & ISO14443B) , TI TagIt, I.Code SLI, ST LRI and other tags according to ISO15693 and ISO7816 SAM cards (both T=0&T=1) Anti collision ability:Full function anti collision; be able to process multi-cards; be able to set operate single card only Auto detecting card:Supported, default OFF SAM slot:1 slot SAM baud rate:9600bps/38400bps ISO7816 PPSS set:supported EEPROM:512 Bytes Power supply:DC 5V Interface:IIC/UART/RS232C (select when place order) Communication rate:IIC:400Kbps UART: 19.2Kbps/115.2Kbps Max. command length:254 Bytes Interface level:UART/IIC: 3.3V (TTL level; 5V tolerance) Power consumption: 150mA Operating distance:150mm (depending on card) Dimension:70mm*50mm*16.5mm Weight:About 120g ISP:Supported Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF RoHS:Supported 3.Protocol There are UART, IIC or RS232C three optional types of interfaces between the host and module. IIC has the advantage of high communication rate and convenient operation. RS232C has long operation distance. Users select the interface according to the special system. 4.Automatic detecting card The automatic detecting card function supports the ISO14443A and ISO15693. This function supports only one card operation. Inner package: box (size: 17.5*14*7cm) Outer package: carton (size: 48*32*24mm) Weight: 330g Terms of delivery: dhl, tnt Delivery time: 5 working days after receive payment.
Key features: Dc3.3v ~5v power supply, uart-ttl interface Compliant with iso14443a standard, Read/write or read only uid of mifare classic 1k /4k, mifare ultralight, mifare ultralight c etc Available with e-wallet increment, descrement, backup value, etc External antenna, reading range up to 5 ~ 7cm External led and buz available ( external driver circuit needed) Technical Parameters: Electrical Specification Power supply DC 3.3V ~ 5V Power consumption Max current
Key features: Frequency available with 125khz 3.3v ~ 5v dc power supply, uart-ttl interface R/w or read-only uid of t5577 and its compatible cards; Available to set to read different page or block address with password; Optional output as wg26, wg34 or uart ttl External antenna, reading range up to 5~7cm External led&buz available( external driver circuit needed Technical parameters: Electrical specification Power supply dc 3.3v-5v Power consumption < 45ma Operation frequency 125khz Baudrate 9600~115200 bit/s ( default 9600bps) Interface uart ttl Antenna external, stamp-hole Reading range 50- 70mm (depends on tag and antenna size) Mechanical specifications Dimension 25mmx16.5mmx2.8mm (lxwxh) Weight 3g Material fr-4, blue Model chk102mt Environmental conditions Operation temperature -20 +80 degree Storage temperature -40 +85 degree Humidity relative humidity 595% Supported standard/ tags T5567,T5577 and compatible cards Sdk information Demo software windows, c# program language Files comprotocol document User manual Demo.Exe
Key Features: Frequency available with 125KHz, 134.2KHz 3.3V ~ 5V DC Power supply, UART-TTL interface Compatible with ISO11784,11785 Standard , support FDX-B Support to Read/write Hitag 1 Tag, Hitag S64/ 256/2048 animal tag, Read UID of EM4100/4200, TK4100 cards; Available to format Hitag S series card to ID card or FDX-B animal ear tags format; External antenna, reading range up to 5~7 cm External LED&BUZ available( external driver circuit needed) Technical Parameters: Electrical Specification Power supply DC 3.3V~5V Power consumption < 45mA Operation frequency 125KHz &134.2KHz Baudrate 9600~115200 bit/s ( default 9600bps) Interface UART TTL Antenna External, stamp-hole Reading range 50- 100mm (depends on tag and antenna size) Mechanical Specifications Dimension 25mmx16.5mmx2.8mm (LxWxH) Weight 3g Material FR-4, Blue Model CHK103MT Environmental Conditions Operation temperature -20°C�? +80°C Storage temperature -40°C�? +85°C Humidity Relative humidity 5%�?95% Supported Standard/ Tags EM4100,EM4200, TK4100 ISO/IEC 11784/11785 Hitag 1, Hitag S 64, Hitag S 256, Hitag S 2048 SDK information Demo software Windows, C# program language Files Comprotocol document API document User Manual Demo.exe
Key features: Dc3.3v ~5v power supply, uart-ttl interface Compliant with iso14443a/b, iso15693 standard, Support mifare classic 1k /4k, mifare ultralight/ultralight c, mifare pro, iso14443a-4 contactless cpu card, i code sli, ti 2048, etc External antenna, reading range up to 5 ~ 7cm External led and buz available (external driver circuit needed) Technical Parameters: Electrical Specification Power supply DC 3.3V ~ 5V Power consumption Max current
Key features: Dc3.3v ~5v power supply, uart-ttl interface Compliant with iso14443a standard, Read/write or read only uid of mifare classic 1k /4k, mifare ultralight, mifare ultralight c etc Available with e-wallet increment, descrement, backup value, etc External antenna, reading range up to 5 ~ 7cm External led and buz available ( external driver circuit needed) Technical Parameters: Electrical Specification Power supply DC 3.3V ~ 5V Power consumption Max current
Key features: Dc3.3v ~5v power supply, uart-ttl interface Compliant with iso14443a/b, iso15693 standard, Support mifare classic 1k /4k, mifare ultralight/ultralight c, mifare pro, iso14443a-4 contactless cpu card, i code sli, ti 2048, etc External antenna, reading range up to 5 ~ 7cm External led and buz available (external driver circuit needed) Technical Parameters: Electrical Specification Power supply DC 3.3V ~ 5V Power consumption Max current
JMY680 series are RFID reader/writer module with IIC or UART serial ports. JMY680 has various functions and supports multi ISO/IEC standard of contactless IC card; the cards from different suppliers. The designer combined some frequent used command of RF IC card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The module and antenna are integrated design. And the impedance between RF module and antenna was tuned by impedance analyzer. So the module has excellent performance and stability. Qualifications: PCD: NXP RC500, RC531, RC400, RC632 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 80mm(depending on card and antenna design) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default ON SAM card slot: 1 slot, 9600bps /38400bps EEPROM: 512 Bytes PPSS set: Supported Interface: IIC, UART, RS232C or USB to RS232C Bridge(select when place order) Communication rate: IIC--400Kbps; UART--19.2Kbps/115.2Kbps Max.command length: 511 Bytes Interface level: 3.3V (TTL level; 5V tolerance) Power supply: 5.0V Power consumption: 150mA Dimension: 70mm¡Á50mm¡Á16.5mm Weight: about 120g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF ISP: Supported RoHS: Compliant 10 pcs per box, box size 16*12*5cm.
