Supplier: Thermoplastic paint, road marking paint, road marking machine
Thermoplastic road marking paint, also called hot melt marking paint, is a kind of powder paint that when heated to 170 -180 C, can be used as a road marking. The paint has a thick coating, wear-resistant, bright and reflective. Product Catalog 1. ASTHO 98 2. ASTHO 79 3. ASTHO 77 4. ASTHO 12
Product: thermoplastic road marking paint Used for: asphalt and concrete Raw materials: c5 petropols, eva, pe wax, titanium dioxide, filler materialsâ?¦ Appearance: powder Color: white/yellow (or other colors according to buyer's requirement) Coating thickness: 1.6mm-2.0mm Abrasion resistance: 56.8 Glass beads: 0%/10%/20%/25%/30% Softening temperature: 90-104â°c Heating temperature180-220â°c Drying time after marking touch dryâ??3 mins full dryâ??10 mins Shelf life 1 year Storage: store in a tightly sealed container in a cool & dry place Area of line: 1 ton thermoplastic paint can mark about 200 m2
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Other Names: Traffic Hot-melt Paint, Road marking Paint High-reflective Thermoplastic JOLINE Place of Origin: Ho Chi Minh City, Vietnam Main Raw Material: Thermoplastic Ester Gum, Maleic Resin, Glass beads Usage: Road Marking Paint Application Method: Road marking applicator State: Powder Coating Brand Name: JOTON JOLINE Model Number: JOLINE CA Intermix glass beads ratio: >30% Daytime Reflective index: min 80% Film thickness: 1.5 -2 mm Density:
Thermoplastic Road Marking Paint is a 100% solids material blend of binder, pigments, glass beads, peformance additives and other wear-resistant fillers. The binder is made from petroleum-derived resins, it is the best used for long-lifespan road marking applications. Intermixed and drop-on glass beads provide retroreflectivity for nighttime visibility of the road marking. Its composition specification and physical technical data conforms to BS3262-1:1989 Part 1 standard.
Protective paint is a paint that is applied to steel or iron to prevent rust from arising. The purpose of protective paint applications is to block direct contact between steel surfaces to open air, water, certain chemical liquids and other conditions that cause rust or corrosion when in direct contact with the steel. Product Catalog 1. Alkyd Based 2. Acrylic Based 3. Epoxy Based 4. Perthane Based
The biggest difference between thermoplastic spraying road marking paint and common thermoplastic screeding coating material is that the viscosity and density of the coating and the construction process are different. During the construction, the molten paint is applied to the road surface by centrifugal force to form a road marking paint. The thermoplastic spraying road marking is thinner, the construction is fast and efficient, and the durability is close to the ordinary hot-melt coating line, which makes it economically more advantageous than the ordinary hot-melt type. Generally applicable to the old road over coating and road sections with very rough road structure.