Geo Textile Netting made of Natural Coco Fiber in White or Brown Coir. (Machine or Hand woven). Used to control Soil Erosion, at work sites, road construction areas, river banks etc.. as a protective measure/Mesh. Can be used as backing for hydro seed spraying. Specifications Mesh Hole size : 20mm x 20mm or 30mm x 30mm or (As per buyer’s requirement for any pattern and size) Supplied in rolls any length and any width (up to 2 meters of maximum width).
Waterproof material The waterproofing material is one kind of performance outstanding pvc waterproofing material. The product takes the polyvinyl chloride resin as the main raw material, and joins each kind special-purpose auxiliary raw material and anti- aged ingredient. Our product is made from the advanced equipment and the advanced craft. Our product has the following outstanding characteristics, such as stronger stretch strength, higher elongation ratio, smaller shrinkage, longer service life, and it has good flexibility under the low temperature, etc. The waterproof material has different widths and different thicknesses, the widths include 1.05m, 2.05m 2.10m and the thicknesses include 0.8mmú¼ 1.0mmú¼1.2mmú¼1.5mmú¼2.0mm. The length is 10m.( the special specification may make to order). And also our product has stable performance, reliable quality and it is very convenient to install. Product characteristics: 1.Longer service life&anti- aged. It can be used for 20 years beyond the ground and be used for 50 years under the ground. 2.Stronger stretch strength, higher elongation ratio, slight change under the heat treatment. 3.Better permeability. It can adapt to different temperatures well. 4.It has good function to prevent the perforation. 5.It is very convenient to install. It is stable, environmentally friendly and has no pollution. 6.Better anti-corrosive and suitable the special situations. 7.Has the good plasticity, it is very convenient and quick to process the corner details. 8.Services conveniently, the cost is inexpensive 9.The shallow color superficial reflection ultraviolet ray illumination, the material surface absorbs less heat, so the temperature is low. 10.The material has good water vapor diffusibility, ití»s easy to discharge the cooling congeals the shape objects. And the moisture and humidity that remain to the basic unit are easier to be discharged.
Mapeband is designed for flexible sealing and waterproofing of expansion joints and crack subject to movement. It particularly used for waterproofing expansion joints in road works, water tunnels and covering applications. Technical Data: Melt index: 30 5g/10mim Density: 1 0.02g/cm3 Elongation: 500% Tensile strength: 1Mpa Shore hardness: 50 3A Shrinkage: 1% Color: Black, gray, customized Size: 120mm*50m/roll Functions: - Flexible waterproofing seal of expansion joints subject to large amounts of movement in service. - Flexible waterproofing seals in tunnels, road-works, etc. - Sealing expansion joints in prefabricated panels. Sealing structural joints in - Sealing joints in hydraulic works, such as channels, basins, drains, pipe-work, etc. - Waterproofing joints in road-works. - Waterproofing expansion joints in flat covering layers.
What is waterproof material-epdm waterproof membrane? This waterproof membrane is made from ternary ethylene-propylene rubber. Hongyuan adopts the world-advanced equipment of cold feeding extrusion and continuous vulcanization technology. With the best performance among high polymer waterproof materials, epdm is of exceptional elasticity and will not split or crack under normal building movement. What are the advantages? 1.Excellent weather-ability, durability and size stability 2.Good adaptability to high and low temperature, uv resistant and anti-corrosion 3.High tensile strength and good elongation, accommodating to structure movement 4.Easy installation, solid joint, and no environmental pollution 5.Good rooting penetration resistance 6.Service life up to 50 years Where is it can be used? 1.Roofs, basement, toilet 2.Industrial and civil building waterproofing 3.Geosynthetic liner for swimming pool, channels, irrigation system 4.Especially suit for projects with high requirements in durability, anti-corrosion and deformation How about the specification? Type epdm waterproof membrane Material Epdm rubber Thickness 1.0mm; 1.2mm;1.5mm;2.0mm Weight(kg/m2) 1.0mm 1.2mm 1.5mm 2.0mm 1.30-1.34 1.54-1.58 1.79-1.83 2.25-2.29 Length 20m/roll Width 1.2m/2.05m/4.0m Usage Basements, ponds, lake, steel structure roofing, underground, tunnels Packing 24/41/80 sqm/roll Loading in container Rolls Colors Black Packing detail: roll pallet Delivery detail: lead time 5~ 20 days
GEOTEXTILE is a superior quality product and its quantity capabilities have been tested and have been certified by KAN and international standards. Hilon Geotextile Non-woven products are the core of various types of industry, from mining, to construction, agriculture, manufacturing and infrastructure. Perfect non-woven products always deliver excellent results. The advanced machines in all our factories in Indonesia are world class machines such as DILO (Germany), Asselin (France) and Fehrer (Austria) which none of our competitors can match. And once the output leaves the machine, a neat delivery network ensures that transport times are reduced and deadlines are met. Our products have been widely used and referenced for various road projects throughout Indonesia. And currently, in accordance with existing technological developments, the application of our products is increasing in accordance with developing technology. Non woven products can be found at various important industrial points in Indonesia. Starting from mining, construction, agriculture, manufacturing, to infrastructure. We are also proud to take part in handling Government projects and partner companies, to help build Indonesia\'s future. Along with the growth and diversification of the existing economy, we also develop. Apart from that, GEOTEXTILE is also being developed to strengthen bunker layers on golf courses and also wrap perforated pipes. Stabilization Where the main function of geotextile stabilization is to spread the surface load more evenly, so that the soil can support the load well. Filtration Geotextiles to filter and prevent the migration of particles from soil/mud along with water flow in the construction system. so that water from the ground surface can flow well and quickly into the channels that have been prepared. Drainage A system for channeling surface water or subsurface water into drainage channels, where the drainage system must be able to separate soil, sand or rock material so that it does not join the water. To prevent other materials from entering the exhaust pipe, geotextile is needed to support the material, but not prevent water from coming out. Protection Geotextile is applied to protect geomembrane construction or other products from being punctured by sharp objects such as rocks, tree trunks or branches and others. Hilon geotextile is used before the geomembrane material is installed so as to prevent damage to the geomembrane. Separation Geotextiles as a separator mix two types of layers with different granulations (Soil-Stone/Stone-Sand), thereby increasing the protection of a more stable area. Concrete Curing Curing is a concrete treatment effort after the concrete has been cast. Concrete treatment is mandatory because it aims to maintain the humidity and temperature needed for cement to carry out the hydration process perfectly.
DESCRIPTION CC-103(1K) Crystalline Waterproofing Materials is fusion resin powders which contains water-soluble crystalline mineral coating with special additive syntheses. It will have a protective coating which is firm and impact resistance after curing. CC-103(1K) is a high technology product to prevent water leakage. ADVANTAGES * Prevent the constructions aging phenomenon * Avoid the leakage and mold on the wall * Effective against negative water pressure * With good stability * Non-Toxic APPLICATION * Internal and external walls * The leakage of inner wall in basements or the protection against negative water pressure * The construction of base isolated structures * Reservoir; drinking water pool * Contaminated water pool; water storage tank PROCEDURE 1. Ensure all surfaces which CC-103(1K) will be applied are clear. 2. Mix one pail(22.5KG) of CC-103(1K) and 4.5~5.0Liter water well by construction mixer. 3. Wait for 3-5 minutes and stir before use; use finishing trowel to smoothing or apply evenly with a nap roller. 4. Use finishing trowel to smoothing after using spray machine. PACKING 22.5KG per pail. STORAGE 6 months in original container stored in dry conditions. LIMITATION The crystalline products need to be used between 4 °C ~ 32 °C when applied.
DESCRIPTION CC-103(2K) Crystalline Waterproofing Materials is a capillary waterproofing formulation. CC-103(2K) has high permeability which crystallize and penetrate deeply into the capillaries of the concrete. ADVANTAGES * Applied to wet surface * Transparent, non-toxic and odorless * High cohesion and effective against positive/negative water pressure well APPLICATION * The leakage of inner wall in basements or the protection against positive/negative water pressure * Prevent seepage and leakage in underground passages and tunnels * Avoid the leakage of cisterns and pools PACKING 30KG/Set A: 22.5KG in powder.+ B: 7.5KG additive. COLOR Grey and white. STORAGE 6 months in original container stored in dry conditions and under 25°C.
The self-adhesive modified asphalt waterproofing membrane is a self-adhesive waterproof material which is made of an elastomer such as SBS and an asphalt, a polyethylene film, an aluminum foil as a surface material or a film (double-sided self-adhesive), and an anti-adhesion barrier layer. Self-adhesive rubber asphalt waterproofing membrane is a new type of building waterproofing material with broad development prospects. It has excellent water impermeability, low temperature flexibility, extensibility and cohesiveness. In particular, it has self-healing properties, which are advantages not found in general waterproof materials, and can ensure superior waterproof quality of waterproof engineering.
Polyethylene(PVC) geomembrane, as a high-performance waterproof and impermeable material, has many remarkable advantages. Thickness: 0.1mm-3mm Width: 2m-6m Color: Black/White/Other colors Following is our PVC geomembrane Thickness 1.6mm specifications: Tensile Strength (vertical and horizontal): 20MPa/mm Elongation at Break (vertical and horizontal): 580% Right-angle tearing strength (vertical and horizontal): 180N/mm Water vapor permeability coefficient: Using temperature range: +70~ -70 Puncture strength 360N Water impervious: 100% Root resistance: 100% Difference Between PVC Geomembrane and HDPE Geomembrane PVC geomembrane and HDPE geomembrane have significant differences in physical properties, treatment difficulty, joint treatment, puncture resistance, and resilience to deformation. Physical Properties and Suitable Environment: PVC membrane: relatively soft and easy to bend, suitable for general waterproofing projects, swimming pools, and wastewater treatment, etc. HDPE membrane: has higher strength and wear resistance, suitable for engineering projects with higher strength and durability requirements, such as water conservancy projects and landfills. Handling Difficulty: PVC membrane: Due to its flexibility, we can make seams in controlled factory conditions, typically requiring fewer on-site seams than HDPE geomembrane. HDPE membrane: Handling in cold weather conditions can be challenging and requires sewing outdoors. Puncture Resistance: PVC membrane: It is harder to penetrate than HDPE and has high elongation characteristics, allowing it to adapt to site changes without reinforcement. HDPE membrane: While it has elasticity, it becomes plastic after exceeding its yield point and no longer has elasticity. Deformation Recovery: PVC membrane: Most of the deformation can be recovered, with a high tensile elongation, suitable for engineering projects with larger design strain limits. HDPE membrane: Deformation after exceeding the yield point cannot be recovered, and the material properties will change. We should select the appropriate geomembrane according to the specific project requirements and the use environment. HDPE geomembrane is suitable for projects that require high strength and durability, while PVC geomembrane is suitable for general waterproofing projects and water treatment.
Type 1: adhesive polymer modified asphalt waterproofing coiled material Low tender degrees: - 10 Fetus: composite tires or polyester With one side adhesive side pe film as a benchmark, can customize the double-sided adhesive/sand shale surface/aluminum foil/face/colour sand surface Type 2: standard: gb/t23441-2009 Low tender degrees: - 20 or 25 Body: polyester tire Thickness of 1.5 mm at least With one side adhesive side pe film as a benchmark, can customize the double-sided adhesive/sand shale surface/aluminum foil/face/colour sand surface Packed in rolls with pallet
